Modification of the properties of salt affected soils using electrochemical treatments
- Jayasekera, Samudra, Hall, Stephen
- Authors: Jayasekera, Samudra , Hall, Stephen
- Date: 2007
- Type: Text , Journal article
- Relation: Geotechnical and Geological Engineering Vol. 25, no. 1 (2007), p. 1-10
- Full Text:
- Reviewed:
- Description: In this project, an in situ soil treatment technique using the principles of electrokinetics was tested using laboratory experimental models in order to identify the potential of this approach in modifying and reinstating the physical properties of salt affected soils. Experiments were conducted in the laboratory using saline-sodic soils collected from two salt affected regions in central Victoria, Australia. Soil specimens were compacted in glass tanks to reproduce in situ density and in situ water content. Using mild steel electrodes inserted into the soil, a direct current was passed through the soil under a constant potential gradient of 0.5 V/cm for a period of 14 days. In separate experiments, distilled water and a saturated lime solution were introduced to the soil via the anode over this experimental period. It was observed that the soil dispersion, otherwise known as soil sodicity (measured as ESP - Exchangeable Sodium Percentage and SAR - Sodium Absorption Ratio) decreased by up to 90% in most regions of the soil between the electrodes. The compressive strength of the soil increased in excess of 100% with electrokinetic treatment alone while the lime-enhanced electrokinetic treatment led to an almost 200% strength increase. The liquid limit and plastic limit of the soil increased causing the plasticity index to decrease, indicating increases in soil compressive strength and workability. These results indicate the potential of this technique for improving the physical properties of salt affected soils both effectively and efficiently, and in particular gives hope for the remediation of salt affected land for infrastructure management and development. © Springer Science+Business Media, Inc. 2006.
- Description: C1
- Description: 2003004772
- Authors: Jayasekera, Samudra , Hall, Stephen
- Date: 2007
- Type: Text , Journal article
- Relation: Geotechnical and Geological Engineering Vol. 25, no. 1 (2007), p. 1-10
- Full Text:
- Reviewed:
- Description: In this project, an in situ soil treatment technique using the principles of electrokinetics was tested using laboratory experimental models in order to identify the potential of this approach in modifying and reinstating the physical properties of salt affected soils. Experiments were conducted in the laboratory using saline-sodic soils collected from two salt affected regions in central Victoria, Australia. Soil specimens were compacted in glass tanks to reproduce in situ density and in situ water content. Using mild steel electrodes inserted into the soil, a direct current was passed through the soil under a constant potential gradient of 0.5 V/cm for a period of 14 days. In separate experiments, distilled water and a saturated lime solution were introduced to the soil via the anode over this experimental period. It was observed that the soil dispersion, otherwise known as soil sodicity (measured as ESP - Exchangeable Sodium Percentage and SAR - Sodium Absorption Ratio) decreased by up to 90% in most regions of the soil between the electrodes. The compressive strength of the soil increased in excess of 100% with electrokinetic treatment alone while the lime-enhanced electrokinetic treatment led to an almost 200% strength increase. The liquid limit and plastic limit of the soil increased causing the plasticity index to decrease, indicating increases in soil compressive strength and workability. These results indicate the potential of this technique for improving the physical properties of salt affected soils both effectively and efficiently, and in particular gives hope for the remediation of salt affected land for infrastructure management and development. © Springer Science+Business Media, Inc. 2006.
- Description: C1
- Description: 2003004772
Intermittent swelling and shrinkage of a highly expansive soil treated with polyacrylamide
- Soltani, Amin, Deng, An, Taheri, Abbas, O'Kelly, Brendan
- Authors: Soltani, Amin , Deng, An , Taheri, Abbas , O'Kelly, Brendan
- Date: 2022
- Type: Text , Journal article
- Relation: Journal of Rock Mechanics and Geotechnical Engineering Vol. 14, no. 1 (2022), p. 252-261
- Full Text:
- Reviewed:
- Description: This laboratory study examines the potential use of an anionic polyacrylamide (PAM)-based material as an environmentally sustainable additive for the stabilization of an expansive soil from South Australia. The experimental program consisted of consistency limits, sediment volume, compaction and oedometer cyclic swell–shrink tests, performed using distilled water and four different PAM-to-water solutions of PD = 0.1 g/L, 0.2 g/L, 0.4 g/L and 0.6 g/L as the mixing liquids. Overall, the relative swelling and shrinkage strains were found to decrease with increasing number of applied swell–shrink cycles, with an ‘elastic equilibrium’ condition achieved on the conclusion of four cycles. The propensity for swelling/shrinkage potential reduction (for any given cycle) was found to be in favor of increasing the PAM dosage up to PD = 0.2 g/L, beyond which the excess PAM molecules self-associate as aggregates, thereby functioning as a lubricant instead of a flocculant; this critical dosage was termed ‘maximum flocculation dosage’ (MFD). The MFD assertion was discussed and validated using the consistency limits and sediment volume properties, both exhibiting only marginal variations beyond the identified MFD of PD = 0.2 g/L. The accumulated axial strain progressively transitioned from ‘expansive’ for the unamended soil to an ideal ‘neutral’ state at the MFD, while higher dosages demonstrated undesirable ‘contractive’ states. © 2022 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
- Authors: Soltani, Amin , Deng, An , Taheri, Abbas , O'Kelly, Brendan
- Date: 2022
- Type: Text , Journal article
- Relation: Journal of Rock Mechanics and Geotechnical Engineering Vol. 14, no. 1 (2022), p. 252-261
- Full Text:
- Reviewed:
- Description: This laboratory study examines the potential use of an anionic polyacrylamide (PAM)-based material as an environmentally sustainable additive for the stabilization of an expansive soil from South Australia. The experimental program consisted of consistency limits, sediment volume, compaction and oedometer cyclic swell–shrink tests, performed using distilled water and four different PAM-to-water solutions of PD = 0.1 g/L, 0.2 g/L, 0.4 g/L and 0.6 g/L as the mixing liquids. Overall, the relative swelling and shrinkage strains were found to decrease with increasing number of applied swell–shrink cycles, with an ‘elastic equilibrium’ condition achieved on the conclusion of four cycles. The propensity for swelling/shrinkage potential reduction (for any given cycle) was found to be in favor of increasing the PAM dosage up to PD = 0.2 g/L, beyond which the excess PAM molecules self-associate as aggregates, thereby functioning as a lubricant instead of a flocculant; this critical dosage was termed ‘maximum flocculation dosage’ (MFD). The MFD assertion was discussed and validated using the consistency limits and sediment volume properties, both exhibiting only marginal variations beyond the identified MFD of PD = 0.2 g/L. The accumulated axial strain progressively transitioned from ‘expansive’ for the unamended soil to an ideal ‘neutral’ state at the MFD, while higher dosages demonstrated undesirable ‘contractive’ states. © 2022 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
- «
- ‹
- 1
- ›
- »