- Ghadrdan, Mohsen, Shaghaghi, Tahereh, Tolooiyan, Ali
- Authors: Ghadrdan, Mohsen , Shaghaghi, Tahereh , Tolooiyan, Ali
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 4 (2020), p.
- Full Text: false
- Reviewed:
- Description: Due to the spatial variability of material characterisations in deep and large scale excavations, stability assessment is often a challenging task. Numerous slope stability analysis methods based on a range of assumptions and principles are implemented in commercial software packages to ease the process of stability assessment of non-homogeneous and multi-layered slopes. However, the selection of a suitable method remains crucial as the application of an unrealistic or unsuitable method may lead to catastrophic consequences. Besides material shear strength parameters, and analysis methods, non-strength characterisations such as permeability and creep can affect the result of slope stability analysis significantly. In this study, the sensitivity of the stability assessment of a deep excavation in Australia to material characterisations such as friction angle, cohesion and permeability and creep is investigated by the use of different formulations and assumptions of the Limit Equilibrium Method (LEM) and the Finite Element Method (FEM) as the two most common slope stability methods. The results show that the stability assessment is highly sensitive to the applied method and assumptions. Moreover, the role of material strength and non-strength parameters and the selection of a suitable constitutive model in slope stability assessment is presented. © 2020, Springer Nature Switzerland AG.
Waveform features and failure patterns of hollow cylindrical sandstone specimens under repetitive impact and triaxial confinements
- Wang, Shiming, Liu, Yunsi, Du, Kun, Zhou, Jian, Khandelwal, Manoj
- Authors: Wang, Shiming , Liu, Yunsi , Du, Kun , Zhou, Jian , Khandelwal, Manoj
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 4 (2020), p.
- Full Text:
- Reviewed:
- Description: In underground engineering practice, the surrounding rocks are subjected to a nonuniform stress field with various radial gradients. In this study, a series of conventional triaxial repetitive impact tests using hollow cylindrical sandstone (HOS) specimens were conducted to reveal the impact waveform features and failure properties of rocks under nonuniform stress conditions. The tests were conducted using a modified large diameter split Hopkinson pressure bar testing system. The confining pressure was set as 5, 10 and 12 MPa. The data of specimens under equilibrium stress states were chosen and analyzed, and the results showed that more applied numbers of cyclic impact loads were needed to break rocks with the increase of confining pressure. Three types of cracks, i.e., ring-shaped cracks around the hole in the center of specimens, axial cracks located in the outer cylindrical surface, and lateral cracks fracturing rock fragments into small pieces appeared in HOS specimens. The failure degrees of HOS specimens could be judged by the waveform features of the reflected wave, and the waveform features of reflected wave are similar in the same failure mode, regardless of the impact velocity and the number of impacts, which only affect the failure degree. © 2020, Springer Nature Switzerland AG.
- Description: The work reported here is supported by financial grants from both the National Natural Science Foundation of China (51774326, 41807259, 51604109 51704109).
- Authors: Wang, Shiming , Liu, Yunsi , Du, Kun , Zhou, Jian , Khandelwal, Manoj
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 4 (2020), p.
- Full Text:
- Reviewed:
- Description: In underground engineering practice, the surrounding rocks are subjected to a nonuniform stress field with various radial gradients. In this study, a series of conventional triaxial repetitive impact tests using hollow cylindrical sandstone (HOS) specimens were conducted to reveal the impact waveform features and failure properties of rocks under nonuniform stress conditions. The tests were conducted using a modified large diameter split Hopkinson pressure bar testing system. The confining pressure was set as 5, 10 and 12 MPa. The data of specimens under equilibrium stress states were chosen and analyzed, and the results showed that more applied numbers of cyclic impact loads were needed to break rocks with the increase of confining pressure. Three types of cracks, i.e., ring-shaped cracks around the hole in the center of specimens, axial cracks located in the outer cylindrical surface, and lateral cracks fracturing rock fragments into small pieces appeared in HOS specimens. The failure degrees of HOS specimens could be judged by the waveform features of the reflected wave, and the waveform features of reflected wave are similar in the same failure mode, regardless of the impact velocity and the number of impacts, which only affect the failure degree. © 2020, Springer Nature Switzerland AG.
- Description: The work reported here is supported by financial grants from both the National Natural Science Foundation of China (51774326, 41807259, 51604109 51704109).
Optimization of blasting design in open pit limestone mines with the aim of reducing ground vibration using robust techniques
- Rezaeineshat, Afsaneh, Monjezi, Masoud, Mehrdanesh, Amirhossein, Khandelwal, Manoj
- Authors: Rezaeineshat, Afsaneh , Monjezi, Masoud , Mehrdanesh, Amirhossein , Khandelwal, Manoj
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 2 (2020), p.
- Full Text:
- Reviewed:
- Description: Blasting operations create significant problems to residential and other structures located in the close proximity of the mines. Blast vibration is one of the most crucial nuisances of blasting, which should be accurately estimated to minimize its effect. In this paper, an attempt has been made to apply various models to predict ground vibrations due to mine blasting. To fulfill this aim, 112 blast operations were precisely measured and collected in one the limestone mines of Iran. These blast operation data were utilized to construct the artificial neural network (ANN) model to predict the peak particle velocity (PPV). The input parameters used in this study were burden, spacing, maximum charge per delay, distance from blast face to monitoring point and rock quality designation and output parameter was the PPV. The conventional empirical predictors and multivariate regression analysis were also performed on the same data sets to study the PPV. Accordingly, it was observed that the ANN model is more accurate as compared to the other employed predictors. Moreover, it was also revealed that the most influential parameters on the ground vibration are distance from the blast and maximum charge per delay, whereas the least effective parameters are burden, spacing and rock quality designation. Finally, in order to minimize PPV, the developed ANN model was used as an objective function for imperialist competitive algorithm (ICA). Eventually, it was found that the ICA algorithm is able to decrease PPV up to 59% by considering burden of 2.9 m, spacing of 4.4 m and charge per delay of 627 Kg. © 2020, Springer Nature Switzerland AG.
- Authors: Rezaeineshat, Afsaneh , Monjezi, Masoud , Mehrdanesh, Amirhossein , Khandelwal, Manoj
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 2 (2020), p.
- Full Text:
- Reviewed:
- Description: Blasting operations create significant problems to residential and other structures located in the close proximity of the mines. Blast vibration is one of the most crucial nuisances of blasting, which should be accurately estimated to minimize its effect. In this paper, an attempt has been made to apply various models to predict ground vibrations due to mine blasting. To fulfill this aim, 112 blast operations were precisely measured and collected in one the limestone mines of Iran. These blast operation data were utilized to construct the artificial neural network (ANN) model to predict the peak particle velocity (PPV). The input parameters used in this study were burden, spacing, maximum charge per delay, distance from blast face to monitoring point and rock quality designation and output parameter was the PPV. The conventional empirical predictors and multivariate regression analysis were also performed on the same data sets to study the PPV. Accordingly, it was observed that the ANN model is more accurate as compared to the other employed predictors. Moreover, it was also revealed that the most influential parameters on the ground vibration are distance from the blast and maximum charge per delay, whereas the least effective parameters are burden, spacing and rock quality designation. Finally, in order to minimize PPV, the developed ANN model was used as an objective function for imperialist competitive algorithm (ICA). Eventually, it was found that the ICA algorithm is able to decrease PPV up to 59% by considering burden of 2.9 m, spacing of 4.4 m and charge per delay of 627 Kg. © 2020, Springer Nature Switzerland AG.
Stress–strain relationship of sandstone under confining pressure with repetitive impact
- Wang, Shiming, Xiong, Xianrui, Liu, Yunsi, Zhou, Jian, Khandelwal, Manoj
- Authors: Wang, Shiming , Xiong, Xianrui , Liu, Yunsi , Zhou, Jian , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 7, no. 2 (2021), p.
- Full Text:
- Reviewed:
- Description: Abstract: A series of triaxial repetitive impact tests were conducted on a 50-mm-diameter split Hopkinson pressure bar testing device to reveal the characteristics of dynamic stress–strain of sandstone under confining pressure, and the confining pressure in this study was set as 5 and 10 MPa. The results showed that sandstone is very sensitive to confining pressure and strain rate. As the confining pressure and strain rate increases, the dynamic strength, critical strain and absorbed energy also increases, however with the increases in number of impacts, they decrease. With impact numbers increases, the stress–strain curve of sandstone gradually transits from a Class I to a Class II. The dynamic statistical damage constitutive model used in the paper can describe the dynamic response of sandstone under confining pressure with repetitive impact. Various influencing factors, such as material characteristics, confining pressure, strain rate and damage on the dynamic mechanical behavior of sandstone are also fully considered in the model. The damage curve changes from concave to convex as the F/ F increase. When the F/ F exceed 0.5, the damage curve appears convex, and the damage is obvious. By comparing with the variation of the reflected wave waveform with the impact numbers, it is found that damage evolution law of the rock under confining pressure with the impact numbers is similar to that of the reflected wave waveform with the impact numbers, can reflect the damage degree of the rock specimen without other auxiliary equipment, which has been verified. Article Highlights: The stress-strain curve of sandstone under confining pressure with repeated impact changes from Class I to Class II, and it will become less obvious as the confining pressure increases.The constitutive model used in the article can well describe the dynamic mechanical properties, strain rate effect and its turning point of rock under confining pressure with repeated impact.The damage curve changes from concave to convex, and the damage evolution law is similar to that of the reflected wave waveform with the impact numbers. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Manoj Khandelwal” is provided in this record**
- Authors: Wang, Shiming , Xiong, Xianrui , Liu, Yunsi , Zhou, Jian , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 7, no. 2 (2021), p.
- Full Text:
- Reviewed:
- Description: Abstract: A series of triaxial repetitive impact tests were conducted on a 50-mm-diameter split Hopkinson pressure bar testing device to reveal the characteristics of dynamic stress–strain of sandstone under confining pressure, and the confining pressure in this study was set as 5 and 10 MPa. The results showed that sandstone is very sensitive to confining pressure and strain rate. As the confining pressure and strain rate increases, the dynamic strength, critical strain and absorbed energy also increases, however with the increases in number of impacts, they decrease. With impact numbers increases, the stress–strain curve of sandstone gradually transits from a Class I to a Class II. The dynamic statistical damage constitutive model used in the paper can describe the dynamic response of sandstone under confining pressure with repetitive impact. Various influencing factors, such as material characteristics, confining pressure, strain rate and damage on the dynamic mechanical behavior of sandstone are also fully considered in the model. The damage curve changes from concave to convex as the F/ F increase. When the F/ F exceed 0.5, the damage curve appears convex, and the damage is obvious. By comparing with the variation of the reflected wave waveform with the impact numbers, it is found that damage evolution law of the rock under confining pressure with the impact numbers is similar to that of the reflected wave waveform with the impact numbers, can reflect the damage degree of the rock specimen without other auxiliary equipment, which has been verified. Article Highlights: The stress-strain curve of sandstone under confining pressure with repeated impact changes from Class I to Class II, and it will become less obvious as the confining pressure increases.The constitutive model used in the article can well describe the dynamic mechanical properties, strain rate effect and its turning point of rock under confining pressure with repeated impact.The damage curve changes from concave to convex, and the damage evolution law is similar to that of the reflected wave waveform with the impact numbers. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Manoj Khandelwal” is provided in this record**
Low amplitude fatigue performance of sandstone, marble, and granite under high static stress
- Du, Kun, Su, Rui, Zhou, Jian, Wang, Shaofeng, Khandelwal, Manoj
- Authors: Du, Kun , Su, Rui , Zhou, Jian , Wang, Shaofeng , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 7, no. 3 (2021), p.
- Full Text:
- Reviewed:
- Description: Abstract: Fatigue tests under high static pre-stress loads can provide meaningful results to better understand the time-dependent failure characteristics of rock and rock-like materials. However, fatigue tests under high static pre-stress loads are rarely reported in previous literature. In this study, the rock specimens were loaded with a high static pre-stress representing 70% and 80% of the uniaxial compressive strength (UCS), and cyclic fatigue loads with a low amplitude (i.e., 5%, 7.5% and 10% of the UCS) were applied. The results demonstrate that the fatigue life decreased as the static pre-stress level or amplitude of fatigue loads increased for different rock types. The high static pre-stress affected the fatigue life greatly when the static pre-stress was larger than the damage stress of rocks in uniaxial compression tests. The accumulative fatigue damage exhibited three stages during the fatigue failure process, i.e., crack initiation, uniform velocity, and acceleration, and the fatigue modulus showed an “S-type” change trend. The lateral and volumetric strains had a much higher sensitivity to the cyclic loading and could be used to predict fatigue failure characteristics. It was observed that volumetric strain εv = 0 is a threshold for microcracks coalescence and is an important value for estimating the fatigue life. Article highlights: Fatigue mechanical performance of high static pre-stressed rocks were evaluated.The results demonstrate that the fatigue life decreased as the static pre-stress level increased and the static pre-stress affected the fatigue life more than the amplitude of fatigue loads.The volumetric strain of zero before fatigue loading is a threshold for fatigue failure of rocks under high static stress. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Manoj Khandelwal” is provided in this record**
- Authors: Du, Kun , Su, Rui , Zhou, Jian , Wang, Shaofeng , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 7, no. 3 (2021), p.
- Full Text:
- Reviewed:
- Description: Abstract: Fatigue tests under high static pre-stress loads can provide meaningful results to better understand the time-dependent failure characteristics of rock and rock-like materials. However, fatigue tests under high static pre-stress loads are rarely reported in previous literature. In this study, the rock specimens were loaded with a high static pre-stress representing 70% and 80% of the uniaxial compressive strength (UCS), and cyclic fatigue loads with a low amplitude (i.e., 5%, 7.5% and 10% of the UCS) were applied. The results demonstrate that the fatigue life decreased as the static pre-stress level or amplitude of fatigue loads increased for different rock types. The high static pre-stress affected the fatigue life greatly when the static pre-stress was larger than the damage stress of rocks in uniaxial compression tests. The accumulative fatigue damage exhibited three stages during the fatigue failure process, i.e., crack initiation, uniform velocity, and acceleration, and the fatigue modulus showed an “S-type” change trend. The lateral and volumetric strains had a much higher sensitivity to the cyclic loading and could be used to predict fatigue failure characteristics. It was observed that volumetric strain εv = 0 is a threshold for microcracks coalescence and is an important value for estimating the fatigue life. Article highlights: Fatigue mechanical performance of high static pre-stressed rocks were evaluated.The results demonstrate that the fatigue life decreased as the static pre-stress level increased and the static pre-stress affected the fatigue life more than the amplitude of fatigue loads.The volumetric strain of zero before fatigue loading is a threshold for fatigue failure of rocks under high static stress. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Manoj Khandelwal” is provided in this record**
- «
- ‹
- 1
- ›
- »