- Title
- The use of low-toxic heavy suspensions in mineral sands evaluation and zircon fractionation
- Creator
- Koroznikova, Larissa; Klutke, Cameron; McKnight, Stafford; Hall, Stephen
- Date
- 2008
- Type
- Text; Journal article
- Identifier
- http://researchonline.federation.edu.au/vital/access/HandleResolver/1959.17/32670
- Identifier
- vital:491
- Identifier
- ISSN:0038-223X
- Abstract
- This paper outlines a simple methodology for mineral characterization, developed as part of the Australian Mineral Industry Research Association (AMIRA) managed research project P777 'The Development of Heavy Suspension Techniques for High Density Separations (Replacement of Clerici's Solution)'. The project was sponsored by De Beers, Rio Tinto and Iluka Resources. Heavy mineral characterization of samples arising from exploration, mining or metallurgical processes is frequently conducted using laboratory heavy liquid analysis. Unfortunately, there are only a limited number of high density ('heavy') liquids and these tend to be more toxic as their density increases. Low-toxicity inorganic solutions, based on tungsten compounds, have been developed that can be utilized at relative densities (RD) up to 3.0. Beyond this value organic liquids can be used; however, this presents significant health and safety hazards. Diiodomethane (methylene iodide) having a relative density of 3.31 is commonly used. Mixtures of thallium formate and thallium malonate were found in the early 1900s by Clerici to provide liquids having specific gravities between 4.0 and 5.0. For the characterization of the heavy components of mineral sand deposits (e.g. anatase RD 3.9, rutile RD 4.2, ilmenite RD 4.4-4.7 and zircon RD 4.6-4.8) there is currently no heavy liquid alternative to Clerici's solution. Clerici's solution is highly toxic and testing is now conducted by few laboratories worldwide, with costs reflecting the chemical costs, infrastructure costs and health and safety regimes (e.g. blood testing of exposed staff). A simple laboratory technique of density fractionation has been developed, employing suspensions of fine tungsten carbide particles in lithium heteropolytungstates solutions, that can replace Clerici's solution in the evaluation of fine mineral sands samples (e.g. -250 +150 microns). The developing methodology that can achieve low-cost, low-toxic separations at relative densities above 4.0 is outlined and the comparison of results with Clerici's solution presented. In addition, preliminary work on density fractionation of zircon samples is presented. Zircon fractionation relates to their inclusion, radionuclide content and metamictization. © The Southern African Institute of Mining and Metallurgy, 2008.; C1
- Publisher
- The Southern African Institute of Mining and Metallurgy
- Relation
- Journal of The South African Institute of Mining and Metallurgy Vol. 108, no. 1 (2008), p. 25-33
- Rights
- Open Access
- Rights
- Copyright The Southern African Institute of Mining and Metallurgy
- Rights
- This metadata is freely available under a CCO license
- Subject
- 0914 Resources Engineering and Extractive Metallurgy; Fractionation; Metallurgy; Sand; Toxic materials; Heavy liquids; Metamictization; Relative density
- Full Text
- Reviewed
- Hits: 2726
- Visitors: 2992
- Downloads: 327
Thumbnail | File | Description | Size | Format | |||
---|---|---|---|---|---|---|---|
View Details Download | DS1 | Published version | 1 MB | Adobe Acrobat PDF | View Details Download |