Creative thinking and OHS committees in the NSW construction industry (1998/99) / Gerard F. Ayers
- Authors: Ayers, Gerard
- Date: 1999
- Type: Text , Thesis , Masters
- Full Text:
- Description: School of Science & Engineering
- Description: Thesis (Master of Applied Science)
Effects of a 12 hour shift roster on physiological heat strain: a case study
- Authors: Batterson, Andrew
- Date: 1993
- Type: Text , Thesis , Masters
- Full Text:
- Description: The study investigated whether there was an increased physiological thermal stress on a group of smelter operators working a 12 hour shift roster.
Sources of severe occupational injury in a major Australian water authority
- Authors: Bellchambers, Brenton
- Date: 1992
- Type: Text , Thesis , Masters
- Full Text:
- Description: An analysis of occuptational accidents (n=587) was completed for the years 1989/90/91 for a major Australian water authority for injuries of five or more days lost time.
- Description: Masters of Applied Science, Occupational Health and Safety
The use and management of hazardous substances in South Australian workplaces : a survey of health and safety respresentatives
- Authors: Bluff, Elizabeth
- Date: 1994
- Type: Text , Thesis , Masters
- Full Text:
- Description: "There is a dearth of information about the current use and management of hazardous substances in workplaces. This project aimed to contribute knowledge in this area by drawing on the practical experience of worker-elected health and safety representatives. This was undertaken by surveying a random sample of 7178 representatives registered with former South Australian Occupational and Safety Commission's Health and Safety Representatives Database. The survey results indicated widespread use of hazard substances although there were differences between industries and work force sectors in the range of chemical types used, the nature and degree of contact that workers have with them. Use of some chemical types was also widespread in a number of industries. Container labelling and access to material safety data sheets were found to be established in many workplaces and some form of assessment to decide how to protect workers was also often undertaken. Baseline information was obtained against which the impact of proposed regulatory reforms to control workplace hazardous substances (consistent with Workplace Australia's National Model Regulations for the Contol of Workplace Hazardous Substances) can be evaluated. This information can also be used in the planning and targeting of educative and other preventive strategies to minimise risks to health and safety arising from work with hazardous substances." Taken form Abstract
The effectiveness of team-based approaches to improving health and safety : case studies from Australian industry in the 1990's
- Authors: Borys, David
- Date: 1997
- Type: Text , Thesis , Masters
- Full Text:
- Description: "Using case studies from Australian industry, the aim of this research project is to study team members' and their customers perceptions of the effectiveness of team approaches to inmproving health and safety, and to identify the organisational and team factors that may enhance effectiveness."
- Description: Master of Applied Science
Using behavior-based safety concepts to enhance safety management systems and support application of the hierachy of controls
- Authors: Browne, Tracey M.
- Date: 2000
- Type: Text , Thesis , Masters
- Full Text:
- Description: "The aim of this masters thesis and the associated research is to investigate the ability of behavior-based safety to enhance safety management systems and support the application of the hierarchy of controls."
- Description: Master of Applied Science
A cost analysis of accidents and injuries in the open cut coalmining industry
- Authors: Esson, Ken
- Date: 1992
- Type: Text , Thesis , Masters
- Full Text: false
- Description: Following a study of back injuries in the Queensland Coal Industry, there arose several questions that needed further research. One of these was the cost of accident and injuries, and the impact of this cost would have on an organisation. The project's research involved a comprehensive study of literature pertaining to the cost of accidents and injuries. This included both insured and uninsured costs. The following four classifications of accidents were researched; first aid treatments; first aid doctor treatments; lost time injury cases; and equipment accident damage cases. A coal mine was selected for the pilot study and, data was collected on the four classifications over a complete year. This means a year that has no out standing accident cases or liablilities. The research was then considered to determine its support for the acceptance or rejection of the hypothesis whic postulates that the current methods used to analyse the cost of accidents or injuries in the coal mining industry are inadequate. As a result of the above condsiderations, a number of key points are put forward in support of the acceptance of the hypothesis. The research established costs both insured and uninsured for the four classifications under review. Then a calculation of a weighted ratio of uninsured costs was made. The paper concludes by making certain recommendations and supporting the need for further research into accident costing within the coal mining fraternity.
- Description: Masters in Applied Science in Occupational Health and Safety
The application of marketing concepts to occupational health and safety in an Australian University
- Authors: Giles, Murray
- Date: 1993
- Type: Text , Thesis , Masters
- Full Text: false
- Description: The dissertation examines the legal, financial and social responsibilities that Universities have in complying with minimum occupational health and safety performance standards.The marketing principles and techniques identified in this project may assist Occupational Health and Safety managers to enhance the service provided.
- Description: Masters of Applied Science, Occupational Health and Safety
Lifting devices used by hospital staff; their relationship to the handling of patients
- Authors: Lean, Leonard
- Date: 1991
- Type: Text , Thesis , Masters
- Full Text: false
- Description: This paper investigates the utilisation of lifting devices by hospital staff, in relation-ship to the handling of patients and the reasons for this. A survey was conducted at Flinders Medical Centre, Adelaide during June and July 1989 using a questionnaire which returned 54% (n=110) completed returns. The results showed a lack of available lifting devices; 16.4% (n=18) of health care respondents had no lifting devices available in their work area while 14.5% (n=16) of respondents had only one lifting device. Where lifting devices were available, 63.6% (n=70) of respondents used the lifting devices less than three times in the week prior to the survey. 24.6% (n=27) of respondent health care workers were of the opinion that lifting devices were not very appropriate for patient handling tasks and 12.7% (n=14) of respondents found the devices difficult to use. 22.7% (n=25) of respondents indicated insufficient room for the use of the devices. 19.1% (n=21) of respondents consider the floor plan layout in which they to be utilised obstructive. 24.5% (n=27) were of respondents found that the lifting devices were not very mobile. 24.6% (n=27) of respondents considered that the setting-up time of the lifting devices took too long and 18.2% (n=20) were of the opinion that the devices were located too far away from the workplace for quick and convenient access. Strong emphasis in the literature review is placed on Common and Statute Law of the employer's "Duty of Care" to the health care workers. The main recommendation is that users need to have input into the design of the equipment. Also, user require initial training and require on-going refresher training in the use of lifting devices for patients. Supervision of users of lifitng devices is essential.
- Description: Thesis (Master of Applied Science )
Employer associations - poised to deliver a much improved OHS performance in Australian workplaces
- Authors: Mannes, Dave
- Date: 1999
- Type: Text , Thesis , Masters
- Full Text:
- Description: "The broad objective of this study is to explore the role that employer associations can play in delivering an active and sustainable range of OHS services to industry and the potential for greater utilisation of this network by governments in delivering significant improvements in OHS performance in Australian workplaces."
- Description: Masters
Occupational fatalities in Victoria 1990-1993 : a case for the control of damaging energy not behaviour
- Authors: McLean, Colin
- Date: 1993
- Type: Text , Thesis , Masters
- Full Text:
- Description: "The aim of the study is to analyse occupational traumatic fatalities in Victoria from the period 1990 through to 1993, to identify opportunities for prevention."
- Description: Thesis (Master of Applied Science)
Seated working posture : a research thesis with experimental methodology and literature review
- Authors: Nelson, David
- Date: 1990
- Type: Text , Thesis , Masters
- Full Text:
- Description: Masters Degree in Applied Science
- Description: Much has been written about seated working posture - particularly in the late 19th and early 20th centuries, and the furniture associated with achieving what is commonly referred to as the "German Square" postural geometry (after Mandal, 1974). The physical sciences aspects of chair, desk and associated furniture ancillary to the task required of the seated worker, have been described in the scientific literature and the standards and guideline publications of the authorities of many countries of the western world. The most important contribution of multi-adjustable furniture to the reduction of postural discomfort and musculo-skeletal complaints is recognised. As a result a variety of standards and guidelines concerning some of these aspects exists in countries such as the United Kingdom, Canada, United States of America, Germany, Australia and the Scandinavian countries. The International Organisation for Standardisation published document TC136/SC7 in 1978, consolidating such existing standards. Less emphasis has been placed on the interface of the information exchange and the comfort, performance and preferences of the seated worker; ie., the practically, the comfort and the intrinsic safety of the working posture prescribed by the model established by the many standards. Existing specifications and guidelines differ in their orientation towards operator performance and comfort of the operator, in as much as some purport to be "furniture standards", for example C.E.N, Comite European de Normalisation, Paris, 1980, while others purport to be "postural standards", for example, International Organisation for Standardisation document TC 136/SC7 (1978). The standards are uniform in matters of upright trunk and 90° upper and lower limb geometry, but are divided in the lineal dimensions applied to eye height above the floor, shoulder acromion to home row of keys (or pen-grip position of the dominant hand and fingers), and eye distance to copy.
Effects of AS/ISO-9000 on OH&S performance in Australian manufacturing organisations : 1990-1994
- Authors: Royce, Philip
- Date: 1995
- Type: Text , Thesis , Masters
- Full Text:
- Description: "The aim of this exploratory study is to establish the effects of certification to AS/ISO 9000 by Australian manufacturing organisations on their OH&S performance."
- Description: Master of Applied Science
Action research and occupational health and safety: an exploratory study
- Authors: Runnalls, John
- Date: 2000
- Type: Text , Thesis , Masters
- Full Text: false
- Description: "This paper describes an exploratory study into action research and its potential application within the field of Occuptional Health and Safety (OHS) in Australia."
- Description: Master of Applied Science
An evaluation of the G.Dip. OHM at the University of Ballarat 1979-1992
- Authors: Swann, Ian
- Date: 1996
- Type: Text , Thesis , Masters
- Full Text: false
- Description: The objective of the study was to evaluate the Graduate Diploma of Occupational Hazard Management at the University of Ballarat.
- Description: Thesis (Master of Applied Science)
Australian occupational protective footwear standards under mutual recognition legislation : can end-user protection levels be reduced as a result of the introduction of this legislation in Australia in 1993?
- Authors: Taylor, Anne
- Date: 1993
- Type: Text , Thesis , Masters
- Full Text: false
- Description: "This thesis aims to investigate the effect of mutual recognition legislation on the sale and use of occupational protective footwear within Australia to determine if there is the potential for end-user protection levels to be reduced below those required by the Australian Standard, AS/NZS 2210."
- Description: Master of Applied Science
Malaysia and Singapore occupational health and safety : an exploratory study
- Authors: Thean Hock, Ch'ng
- Date: 1994
- Type: Text , Thesis , Masters
- Full Text:
- Description: This research project constitutes an exploratory study of the governmental approach to occupational health and safety (OH&S) management
- Description: Masters
An evaluation of supervisor's accident investigation reports
- Authors: Thompson, Gary
- Date: 1997
- Type: Text , Thesis , Masters
- Full Text: false
- Description: The aim of the research project is to investigate the veracity of negative criticisms of supervisors' accident investigations by using the generalised time sequence model as the analytical tool to evaluate the data recorded in a convenience sample of supervisors' accident investigation report forms.
- Description: Master of Applied Science
A quantitative risk assessment of laboratory fume cupboards at Monash University
- Authors: Tillman, C.J.
- Date: 1990
- Type: Text , Thesis , Masters
- Full Text: false
- Description: "In this work, a quantitative risk assessment procedure for laboratory fume cupboards has been developed using estimates of frequency (probabilty x exposure) and severity."
- Description: Masters Degree in Applied Science, Occupational Health and Safety