The effect of food-grade low-molecular-weight surfactants and sodium caseinate on spray drying of sugar-rich foods
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2010
- Type: Text , Journal article
- Relation: Food Biophysics Vol. 5, no. 2 (2010), p. 128-137
- Full Text: false
- Description: The effect of low-molecular-weight surfactants (LMS) and sodium caseinate (NaCas) on spray drying of sugar-rich foods has been studied. Sucrose and NaCas were selected as a model sugar-rich food and protein, respectively. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween 80) were chosen as model ionic and nonionic LMS. Sucrose-NaCas solutions with the solids ratio of 99.5:0.5 in the absence and presence (0.01% and 0.05%) of SSL and Tween 80 were prepared. The feed solutions had 25% solid concentration in all cases. The dynamic surface tension (DST) values of the solutions were measured for 100 s and the solutions were subsequently spray dried at inlet and outlet temperatures of 165 and 65 °C, respectively. The glass-rubber temperature (Tg-r), the surface elemental composition and amorphous-crystalline nature of the powders were also determined. At these concentrations and experimental time frame, it was found that the proteins preferentially migrated to the air-water interface reasonably swiftly. The addition of LMS resulted in partial or complete displacement of the proteins from the air-water interface. For spray-drying trials with the yield of 82.0%, it was found that 52.0% of the powder particle surface was covered with proteins. The powder recovery was greatly reduced by the LMS concentration and type. At 0.05% on dry solid basis, in the case of nonionic surfactant (Tween 80), the displacement of protein from the surface was such that no powder was recovered. The ionic surfactant (SSL) displaced 2.0% and 29.3% proteins from the droplet surface at concentrations of 0.01% and 0.05%, respectively, resulting in 75.5 ± 1.8% and 30.1 ± 1.4% powder yield. The Tg-r results revealed that the amount of protein required for successful spray drying of the sucrose-protein solution depends on the amount of proteins present in the droplet surface but not in the bulk. X-ray diffraction and scanning electron microscopy results confirmed that the powders of both sucrose-NaCas and sucrose-NaCas with 0.01% SSL were mostly amorphous, while those with sucrose-NaCas-Tween 80 (0.01%) and sucrose-NaCas-SSL (0.05%) were crystalline. © 2010 Springer Science+Business Media, LLC.
The effects of proteins and low molecular weight surfactants on spray drying of model sugar-rich foods: Powder production and characterisation
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2011
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 104, no. 2 (2011), p. 259-271
- Full Text: false
- Reviewed:
- Description: The effects of proteins and low molecular weight surfactants (LMS) on spray drying and powder characteristics of model sugar-rich foods have been studied. Fructose and sucrose were selected as model sugar-rich foods and sodium caseinate (NaCas) was selected as a model protein. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic low molecular weight surfactants. The feed solutions for spray drying had 25% solid concentration in all. To achieve identical powder recoveries of the order of 80% much higher NaCas:fructose ratio (30:70) was required compared to NaCas:sucrose ratio (0.5:99.5) which corresponded to 7.89% and 0.13% of sodium caseinate (initial bulk concentration), respectively. There was no change in powder recovery when the SSL concentration was increased from 0.01% to 0.05% in fructose-NaCas-SSL solution and also addition of 0.01% Tween-80 into fructose-NaCas solution did not affect the powder recovery (76.7 ± 2.3%), however, it was slightly affected with the increase of Tween-80 to 0.05% (69.0 ± 1.9%). At NaCas concentration above critical micelle concentration of NaCas (3% w/w), the presence of up to 0.05% low molecular weight surfactants had either no effect or minimal effect on the surface coverage of the droplets/particles and also on the powder recovery depending on the nature of the low molecular weight surfactants. The surface protein coverage and the recovery of the powder in sucrose-protein systems were very sensitive in the presence of low molecular weight surfactants due to being below the critical micelle concentration of NaCas. SSL displaced 2.0% and 29.3% of proteins from the droplet surface of sucrose-NaCas-SSL, respectively, when its concentration was varied from 0.01% to 0.05% thereby reducing the powder recovery from 75.5% to 30%. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount of NaCas from the droplet surface and no powder was recovered. These phenomena are explained on the basis of surface-glass transition temperature, dynamic surface tension, nature of surfactants and glass transition temperature of sugars used. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas, sucrose-NaCas with 0.01% SSL and all powders of fructose were amorphous. © 2010 Elsevier Ltd. All rights reserved.