Dynamic modelling and optimisation of flexible operation in post-combustion CO2 capture plants - A review
- Authors: Bui, Mai , Gunawan, Indra , Verheyen, Vincent , Feron, Paul , Meuleman, Erik , Adeloju, Samuel
- Date: 2014
- Type: Text , Journal article , Review
- Relation: Computers and Chemical Engineering Vol. 61, no. (2014), p. 245-265
- Full Text: false
- Reviewed:
- Description: The drive for efficiency improvements in post-combustion CO2 capture (PCC) technologies continues to grow, with recent attention being directed towards flexible operation of PCC plants. However, there is a lack of research into the effect of process disturbances when operating flexibly, justifying a need for validated dynamic models of the PCC process. This review critically examines the dynamic PCC process models developed to date and analyses the different approaches used, as well as the model complexity and their limitations. Dynamic process models coupled with economic analysis will play a crucial role in process control and optimisation. Also discussed are key areas that need to be addressed in future dynamic models, including the lack of reliable dynamic experimental data for their validation, development of feasible flexible operation and process control strategies, as well as process optimisation by integrating accurate process models with established economic analysis tools. © 2013 Elsevier Ltd.
Chemical characterization of MEA degradation in PCC pilot plants operating in Australia
- Authors: Cruickshank, Alicia , Verheyen, Vincent , Adeloju, Samuel , Meuleman, Erik , Chaffee, Alan , Cottrell, Aaron , Feron, Paul
- Date: 2013
- Type: Text , Journal article
- Relation: Energy Procedia Vol. 37, no. (2013), p. 877-882
- Full Text:
- Reviewed:
- Description: An important step towards commercial scale post-combustion CO2 capture from coal-fired power stations is understanding solvent degradation. Laboratory scale trials have identified three main solvent degradation pathways for 30% MEA: oxidative degradation, carbamate polymerization and formation of heat stable salts. This paper probes the semi-volatile organic compounds produced from a single batch of 30% MEA which was used to capture CO2 from a black coal-fired power station (Tarong, Queensland, Australia) for approximately 700 hours, followed by 500 hours at the brown coal-fired power station (Loy Yang, Victoria, Australia). Comparisons are made between the compounds identified in this aged solvent system with MEA degradation reactions described in literature. Most of semi-volatile compounds tentatively identified by GC/MS have previously been reported in laboratory scale degradation trials. Our preliminary results show low levels of degradation products were present in samples after its use in the pilot plant at Tarong (black coal) and consequent 13 months storage, but much higher concentrations were later found in the same solvent during its at use in the pilot plant at Loy Yang Power (brown coal). Further work includes identifying the cause of poor GC/MS repeatability and investigating the relative rates of reactions described in literature. The impact of inorganic anions and dissolved metals on MEA degradation will also be explored.
Towards commercial scale postcombustion capture of CO2 with monoethanolamine solvent: key considerations for solvent management and environmental impacts
- Authors: Cruickshank, Alicia , Verheyen, Vincent , Adeloju, Samuel , Meuleman, Erik , Feron, Paul
- Date: 2012
- Type: Text , Journal article
- Relation: Environmental Science & Technology Vol. 46, no. 7 (2012), p. 3643-3654
- Full Text: false
- Reviewed:
- Description: Chemical absorption with aqueous amine solvents is the most advanced technology for postcombustion capture (PCC) of CO2 from coal-fired power stations and a number of pilot scale programs are evaluating novel solvents, optimizing energy efficiency, and validating engineering models. This review demonstrates that the development of commercial scale PCC also requires effective solvent management guidelines to ensure minimization of potential technical and environmental risks. Furthermore, the review reveals that while solvent degradation has been identified as a key source of solvent consumption in laboratory scale studies, it has not been validated at pilot scale. Yet this is crucial as solvent degradation products, such as organic acids, can increase corrosivity and reduce the CO2 absorption capacity of the solvent. It also highlights the need for the development of corrosion and solvent reclamation technologies, as well as strategies to minimize emissions of solvent and degradation products, such as ammonia, aldehydes, nitrosamines and nitramines, to the atmosphere from commercial scale PCC. Inevitably, responsible management of aqueous and solid waste will require more serious consideration. This will ultimately require effective waste management practices validated at pilot scale to minimize the likelihood of adverse human and environmental impacts from commercial scale PCC.
Comparison of sample preparation methods for the GC–MS analysis of monoethanolamine (MEA) degradation products generated during post-combustion capture of CO2
- Authors: Reynolds, Alicia , Verheyen, Vincent , Adeloju, Samuel , Chaffee, Alan , Meuleman, Erik
- Date: 2016
- Type: Text , Journal article
- Relation: International Journal of Greenhouse Gas Control Vol. 52, no. (2016), p. 201-214
- Full Text: false
- Reviewed:
- Description: As the development of chemical absorption technology for post-combustion capture (PCC) of CO2 from coal-fired power station flue gases proceeds towards commercial deployment, the focus on establishing a thorough understanding of the degradation of the aqueous amine absorbents is increasing. However, there is a need to develop and demonstrate robust analytical methods that are capable of measuring the concentrations of amine degradation products in aqueous monoethanolamine (MEA) matrix during pilot-scale PCC. In this study, sample cleanup and derivatisation methods that enable reliable and robust analysis of MEA degradation products by GC–MS are described. Two sample cleanup methods were evaluated: dehydration (by rotary evaporation and molecular sieves) and cation exchange. The cation exchange sample preparation method was preferred for the analysis of organic degradation products in these samples because it achieved higher recovery and repeatability of GC–MS measurements than those obtained with the dehydration method. Furthermore, the cation exchange method resulted in less continued amine degradation during subsequent analysis steps because of its ability to separate acidic analytes from basic analytes, as well as to remove some inorganic interferences. Further improvement of the sensitivity, repeatability and accuracy of this GC–MS analytical method can be accomplished by: (a) increasing the scale of the cation exchange and/or derivatisation procedures; (b) optimizing the derivatisation reaction conditions; and (c) using a narrower bore (e.g. 0.25 mm ID) GC–MS column. The proposed cation exchange and derivatisation procedures can be readily adopted for the quantification of organic degradation products in other aqueous amine absorbents to provide important insights into the degradation of amine absorbents during PCC of CO2. © 2016 Elsevier Ltd
Evaluation of methods for monitoring MEA degradation during pilot scale post-combustion capture of CO
- Authors: Reynolds, Alicia , Verheyen, Vincent , Adeloju, Samuel , Chaffee, Alan , Meuleman, Erik
- Date: 2015
- Type: Text , Journal article
- Relation: International Journal of Greenhouse Gas Control Vol. 39, no. (2015), p. 407-419
- Full Text: false
- Reviewed:
- Description: Amine degradation is an important and current focus in the development of chemical absorption technology based on the use of aqueous amines for post-combustion capture (PCC) of CO
Monoethanolamine degradation during Pilot-Scale post-combustion capture of CO₂ from a brown coal-fired power station
- Authors: Reynolds, Alicia , Verheyen, Vincent , Adeloju, Samuel , Chaffee, Alan , Meuleman, Erik
- Date: 2015
- Type: Text , Journal article
- Relation: Energy & Fuels Vol. 29, no. 11 (2015), p. 7441-7455
- Full Text: false
- Reviewed:
- Description: The use of aqueous amines, such as monoethanolamine (MEA, 2-aminoethanol), for post-combustion capture (PCC) of CO2 from fossil-fuel-fired power station flue gases leads to undesirable reactions with oxygen, SO2, and NO2. This study has used a gas chromatography with mass spectrometry detection (GC-MS) method to measure the changes in concentrations of organic compounds in samples of a 30% (w/w) aqueous MEA absorbent obtained from CSIRO's PCC pilot plant operating at AGL's Loy Yang brown coal-fired power station in Latrobe Valley, Victoria, Australia. This aqueous MEA absorbent was previously used for more than 700 h of PCC, and the collected samples represent a further 834 h of PCC operation. These data provide a new perspective on the close, interdependent relationships between corrosion and amine degradation reactions. Other important outcomes include confirmation that (a) organic degradation products identified during laboratory-scale trials were also produced during pilot-scale PCC and (b) N-(2-hydroxyethyl)imidazole (HEI) is a suitable molecular marker for oxidative degradation of MEA. This investigation has also highlighted areas that require further research, including (a) determination of oxidative degradation mechanisms in both the presence and absence of dissolved transition metals, (b) determination of parameters that limit oxidative degradation during pilot-scale PCC, (c) investigation of the antioxidative or oxygen-scavenging properties of partially oxidized amine absorbents during PCC, and (d) measurement of the concentrations of glycine, glycolic acid, and other potential organic acids during PCC. [ABSTRACT FROM AUTHOR]
- Description: The use of aqueous amines, such as monoethanolamine (MEA, 2-aminoethanol), for post-combustion capture (PCC) of
Primary sources and accumulation rates of inorganic anions and dissolved metals in a MEA absorbent during PCC at a brown coal-fired power station
- Authors: Reynolds, Alicia , Verheyen, Vincent , Adeloju, Samuel , Chaffee, Alan , Meuleman, Erik
- Date: 2015
- Type: Text , Journal article
- Relation: International Journal of Greenhouse Gas Control Vol. 41, no. (2015), p. 239-248
- Full Text: false
- Reviewed:
- Description: Post-combustion capture (PCC) of CO2 from fossil fuel-fired power station flue gas is one of many technologies that are being developed to reduce anthropogenic greenhouse gas emissions in the medium term. Wet-gas scrubbing using aqueous amines is currently the most mature PCC technology suitable for separating CO2 from coal-fired power station flue gases. In this study, a series of twelve samples of a degraded 30% (w/w) MEA absorbent were obtained over a six month pilot scale PCC campaign at a brown coal-fired power station in Australia. These samples were used to investigate the accumulation of heat-stable salts, inorganics and minerals. The heat-stable salts concentration increased from 0.80 to 2.29% (w/w, as MEA) and organic acids from the oxidative degradation of MEA were the largest component of heat-stable salts. Acid gases such as SOx and NOx, make-up water, ultra-fine fly-ash and corrosion were all sources of the minerals and inorganics that accumulated in the aqueous MEA absorbent. Corrosion was the single biggest contributor of transition metals and the abrupt change in ratios of Fe, Cr and Mo suggests that the dominant corrosion mechanism may have changed towards the end of the campaign. The rapid accumulation of minerals and inorganics during this PCC campaign highlights the importance of continuing research into the interactions between amine absorbents and inorganic or mineral contaminants. The data presented in this study are an important resource for design of laboratory scale experiments to investigate these physical and chemical interactions between aqueous amines, minerals and inorganics.
Quantification of aqueous monoethanolamine concentration by gas chromatography for postcombustion capture of
- Authors: Reynolds, Alicia , Verheyen, Vincent , Adeloju, Samuel , Chaffee, Alan , Meuleman, Erik
- Date: 2014
- Type: Text , Journal article
- Relation: Industrial and Engineering Chemistry Research Vol. 53, no. 12 (2014), p. 4805-4811
- Full Text: false
- Reviewed:
- Description: The availability of reliable analytical methods for measuring amine concentrations is necessary for optimum operation of aqueous amine CO 2 separation systems being employed for postcombustion capture (PCC) of CO2. A GC-FID (gas chromatography with flame ionization detection) method is described for the reliable quantification of 30% (w/w) monoethanolamine (MEA) in severely degraded solvent samples. The observation of intermittent splitting of the MEA peak was a major concern with this approach. The use of a wide-bore column led to improved MEA peak resolution and peak shape. The reliability and robustness of the GC-FID method were assessed by analyzing degraded 30% (w/w) MEA solvent samples from CSIRO's pilot plant at AGL's Loy Yang power station in Victoria, Australia. The results were compared with those obtained by titration and total organic carbon (TOC) measurements of the same samples. The MEA concentrations obtained by the GC-FID and titration methods were statistically similar. In contrast, the MEA concentrations calculated from TOC were consistently higher than those obtained by both GC-FID and titration. © 2014 American Chemical Society.