Effect of trehalose and ultrasound-assisted osmotic dehydration on the state of water and glass transition temperature of broccoli (Brassica oleracea L. var. botrytis L.)
- Authors: Xin, Ying , Zhang, Min , Adhikari, Benu
- Date: 2013
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 119, no. 3 (2013), p. 640-647
- Full Text: false
- Reviewed:
- Description: The effects of trehalose and ultrasound-assisted osmotic dehydration on the glass transition temperature (Tg′) and the state of water in broccoli were analyzed by using differential scanning calorimetry (DSC), low field nuclear magnetic resonance (LF-NMR) and magnetic resonance imaging (MRI). The results showed that osmotic dehydration using trehalose can affect the Tg′ of broccoli by changing the state of water within the sample structure. The values of Tg′ of the osmotically dehydrated broccoli samples ranged between -27.52 C and -23.31 C, which constituted an increase of about 2-6 C compared with that of the untreated sample. Compared with the normal osmotic dehydration with 2 h, ultrasound-assisted dehydration with shorter time (30 min) could get the higher value of Tg′ by increased the water loss and accumulation of trehalose and decrease the mobility of water in the broccoli cell tissue. However, when the ultrasound treatment time was 40 min, it resulted into decrease in Tg′ indicating the important role of treatment time in ultrasound-assisted osmotic dehydration process. © 2013 Elsevier Ltd. All rights reserved.
- Description: 2003011222
The survival of lactococcus lactis in a convective-air-drying environment: The role of protectant solids, oxygen injury, and mechanism of protection
- Authors: Ghandi, Amir , Powell, Ian , Chen, Xiao Dong , Adhikari, Benu
- Date: 2013
- Type: Text , Journal article
- Relation: Drying Technology Vol. 31, no. 13-14 (2013), p. 1661-1674
- Full Text:
- Reviewed:
- Description: The effect of protectant solids (lactose, sodium caseinate, and their mixture) on the survival of Lactococcus lactis subsp. cremoris was studied in a convective-air-drying environment using single droplet drying. The effect of drying the bacteria in the presence or absence of sodium ascorbate was evaluated, and the evolution of glass transition temperature in the drying process was examined. It was found that the protective efficiency of lactose and sodium caseinate was comparable at the concentrations tested. A mixed protectant matrix (lactose:sodium caseinate, 3:1) gave higher survival than with lactose or sodium caseinate alone at the same total solids level. Protectants enhanced bacterial survival by moderating the drying rate and achieving dryness at lower temperatures, and by facilitating the formation of a glassy matrix earlier in the drying process. The addition of sodium ascorbate was also examined. © 2013 Copyright Taylor and Francis Group, LLC.
- Description: C1
The effects of proteins and low molecular weight surfactants on spray drying of model sugar-rich foods: Powder production and characterisation
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2011
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 104, no. 2 (2011), p. 259-271
- Full Text: false
- Reviewed:
- Description: The effects of proteins and low molecular weight surfactants (LMS) on spray drying and powder characteristics of model sugar-rich foods have been studied. Fructose and sucrose were selected as model sugar-rich foods and sodium caseinate (NaCas) was selected as a model protein. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic low molecular weight surfactants. The feed solutions for spray drying had 25% solid concentration in all. To achieve identical powder recoveries of the order of 80% much higher NaCas:fructose ratio (30:70) was required compared to NaCas:sucrose ratio (0.5:99.5) which corresponded to 7.89% and 0.13% of sodium caseinate (initial bulk concentration), respectively. There was no change in powder recovery when the SSL concentration was increased from 0.01% to 0.05% in fructose-NaCas-SSL solution and also addition of 0.01% Tween-80 into fructose-NaCas solution did not affect the powder recovery (76.7 ± 2.3%), however, it was slightly affected with the increase of Tween-80 to 0.05% (69.0 ± 1.9%). At NaCas concentration above critical micelle concentration of NaCas (3% w/w), the presence of up to 0.05% low molecular weight surfactants had either no effect or minimal effect on the surface coverage of the droplets/particles and also on the powder recovery depending on the nature of the low molecular weight surfactants. The surface protein coverage and the recovery of the powder in sucrose-protein systems were very sensitive in the presence of low molecular weight surfactants due to being below the critical micelle concentration of NaCas. SSL displaced 2.0% and 29.3% of proteins from the droplet surface of sucrose-NaCas-SSL, respectively, when its concentration was varied from 0.01% to 0.05% thereby reducing the powder recovery from 75.5% to 30%. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount of NaCas from the droplet surface and no powder was recovered. These phenomena are explained on the basis of surface-glass transition temperature, dynamic surface tension, nature of surfactants and glass transition temperature of sugars used. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas, sucrose-NaCas with 0.01% SSL and all powders of fructose were amorphous. © 2010 Elsevier Ltd. All rights reserved.
Glass-transition behaviour of plasticized starch biopolymer system - A modified Gordon-Taylor approach
- Authors: Chaudhary, Deeptangshu , Adhikari, Benu , Kasapis, Stefan
- Date: 2010
- Type: Text , Journal article
- Relation: Food Hydrocolloids Vol. 25, no. 1 (2010), p. 114-121
- Full Text: false
- Reviewed:
- Description: Two plasticizers namely, glycerol and xylitol, based on their similar molecular size ( 6.3 Å) but different molecular weights (Glycerol-92; Xylitol-152) were selected for studying the glass-transition behaviour (rubber like behaviour) in multi-plasticized starch biopolymer with about 70% amylopectin structure. In the calorimetry measurements, glass-transition temperatures (onset temperature for bulk viscous flow) of plasticized samples were higher than non-plasticized samples at low water activities, thus showing typical antiplasticization behaviour. However, when plasticizer concentration was increased up to 15% and 20% wt, all plasticized samples showed significant reduction in glass-transition temperature. We used a modified Gordon-Taylor model to understand the competitive plasticization of glycerol and xylitol in presence of water, and suggest that competitive plasticization exists and occurs at a threshold amount of matrix free water content, due to strong three-way interactions: starch-plasticizer, plasticizer-plasticizer/water and starch-water. This competitive interaction is significant in determining the onset temperature for viscous flow behaviour; at higher matrix water content, the Gordon-Taylor constant was relatively unaffected by the plasticizer amount, and water was the dominant plasticizer. A new interaction parameter that separates the starch-plasticizer interaction in a starch-plasticizer-water system is also discussed. © 2010 Elsevier Ltd. All rights reserved.
- Description: 2003008289
Effect of addition of proteins on the production of amorphous sucrose powder through spray drying
- Authors: Adhikari, Benu , Howes, Tony , Bhandari, Bhesh , Langrish, Tim
- Date: 2009
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 94, no. 2 (2009), p. 144 -153
- Full Text:
- Reviewed:
- Description: Spray drying trials were carried out to produce amorphous sucrose powder. Firstly, pure sucrose solutions were prepared and spray dried at inlet and outlet temperatures of 160 °C and 70 °C, respectively. No amorphous powder was obtained and only 18% of the feed solids were recovered in a crystalline form, with the remaining solids lost as wall deposits. Secondly, sodium caseinate (Na-C) and hydrolyzed whey protein isolate (WPI) were added in sucrose:protein solid ratios of (99.5:0.5) and (99.0:1.0) and drying trials were conducted maintaining the initial drying conditions. In both these cases, greater than 80% of the feed solids were recovered in an amorphous form. The increase in protein concentration from 0.5% to 1% on dry solid basis did not further improve the recovery. The remarkable increase in recovery from a small addition of protein is attributed to preferential migration of protein molecules to the droplet-air interface, and the subsequent transformation of the thin, protein-rich film into a non-sticky glassy state upon drying. This film overcomes both the particle-to-particle and particle-to-wall stickiness. The measured bulk glass rubber transition temperature (Tg-r) values of the bulk mixtures at various moisture contents were very close to the corresponding mean glass transition temperature (Tg) of the pure sucrose indicating that surface layer Tg rather than the bulk Tg is responsible for this. Electron spectroscopy for chemical analysis (ESCA) studies revealed that the particle surface was covered by 50-58% (by mass) proteins. The calculated glass transition temperature of the surface layer (Tg,surface layer), based on the surface elemental compositions, showed that the Tg,surface layer has increased to the extent that it remained within the safe drying envelope of spray drying. © 2009 Elsevier Ltd. All rights reserved.
Sticky behavior of whey protein isolate and lactose droplets during convective drying
- Authors: Adhikari, Benu , Howes, Tony , Shrestha, A. , Bhandari, Bhesh
- Date: 2006
- Type: Conference paper
- Relation: Paper presented at 2006 AIChE Spring National Meeting - 5th World Congress on Particle Technology, Orlando, Florida :
- Full Text: false
- Description: Stickiness of whey protein isolate (WPI) and spray dried lactose droplets was studied at two air temperatures (65±0.5°C, 80±0.5°C), 0.75 m/s air velocity and 2-2.5% relative humidity using an in situ stickiness testing device. A stainless steel probe with 50 mm/min contact/withdrawal speed was used. The moisture and temperature histories were measured through parallel experiments. In each case, the surface of the lactose droplet remained sticky and failed cohesively until the surface was completely surrounded with crystals. The crystal layer remained fragile, fractured upon the probe contact and a thin layer of solution came out to the probe surface even after the moisture (u, dry basis) was lower than 0.2. WPI droplets formed thin and smooth skin immediately after coming in contact with hot air. The tensile strength of this skin increased rapidly and peaked (u = 2.14 at 45°C and u = 1. 47 at 65.7°C) fairly early during drying process. WPI droplet surface became completely non-sticky soon after attaining the peak tensile strength (u =1.32 at 53.4 °C and u= 1.05 at 68.8°C), mainly due to transformation of the outer layer of the skin into glassy material. The skin forming and surface active nature of WPI was exploited to minimize the stickiness of honey during spray drying. Replacement of 5% (w/w) maltodextrin with WPI raised the powder recovery of honey solids from 28% to 80%. Stickiness of the WPI on glass, Teflon and polyurethane surfaces was studied by replacing the contact surface of the probe with these materials. It was found that the stickiness of glass surface was the highest at test temperatures. Teflon surface offered the lowest stickiness at the test temperatures making it suitable materials to minimize solution/particle stickiness through coating.
Characterization of the surface stickiness of fructose-maltodextrin solutions during drying
- Authors: Adhikari, Benu , Howes, Tony , Bhandari, Bhesh , Truong, V.
- Date: 2003
- Type: Text , Journal article
- Relation: Drying Technology Vol. 21, no. 1 (2003), p. 17-34
- Full Text: false
- Reviewed:
- Description: A probe tack test has been used for the in situ characterization of the surface stickiness of hemispherical drops with an initial radius of 3.5 mm while drying. Surface stickiness of drops of fructose and maltodextrin solutions dried at 63degreesC and 95degreesC was determined. The effect of addition of maltodextrin on fructose solution-was studied with fructose/maltodextrin solid mass ratios of 4: 1, 1: 1, and 1:4. Pure fructose solutions remained completely sticky and failed cohesively even when their moisture approached zero. Shortly after the start of drying, the surface of the maltodextrin drops formed a skin, which rapidly grew in thickness. Subsequently the drop surface became completely nonsticky probably due to transformation of outer layers into a glassy material. Addition of malto,dextrin significantly altered the surface stickiness of drops of fructose solutions, demonstrating its use as an effective drying aid.
Surface stickiness of drops of carbohydrate and organic acid solutions during convective drying : Experiments and modeling
- Authors: Adhikari, Benu , Howes, Tony , Bhandari, Bhesh , Troung, V.
- Date: 2003
- Type: Text , Journal article
- Relation: Drying Technology Vol. 21, no. 5 (2003), p. 839-873
- Full Text: false
- Reviewed:
- Description: Drying kinetics of low molecular weight sugars such as fructose, glucose, sucrose and organic acid such as citric acid and high molecular weight carbohydrate such as maltodextrin (DE 6) were determined experimentally using single drop drying experiments as well as predicted numerically by solving the mass and heat transfer equations. The predicted moisture and temperature histories agreed with the experimental ones within 6% average relative (absolute) error and average difference of +/- 1degreesC, respectively. The stickiness histories of these drops were determined experimentally and predicted numerically based on the glass transition temperature (T-g) of surface layer. The model predicted the experimental observations with good accuracy. A nonsticky regime for these materials during spray drying is proposed by simulating a drop, initially 120 mum in diameter, in a spray drying environment.