Energy-balanced transmission policies for wireless sensor networks
- Azad, Arman, Kamruzzaman, Joarder
- Authors: Azad, Arman , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Journal article
- Relation: IEEE Transactions on Mobile Computing Vol. 10, no. 7 (2011), p. 927-940
- Full Text:
- Reviewed:
- Description: Transmission policy, in addition to topology control, routing, and MAC protocols, can play a vital role in extending network lifetime. Existing transmission policies, however, cause an extremely unbalanced energy usage that contributes to early demise of some sensors reducing overall network's lifetime drastically. Considering cocentric rings around the sink, we decompose the transmission distance of traditional multihop scheme into two parts: ring thickness and hop size, analyze the traffic and energy usage distribution among sensors and determine how energy usage varies and critical ring shifts with hop size. Based on above observations, we propose a transmission scheme and determine the optimal ring thickness and hop size by formulating network lifetime as an optimization problem. Numerical results show substantial improvements in terms of network lifetime and energy usage distribution over existing policies. Two other variations of this policy are also presented by redefining the optimization problem considering: 1) concomitant hop size variation by sensors over lifetime along with optimal duty cycles, and 2) a distinct set of hop sizes for sensors in each ring. Both variations bring increasingly uniform energy usage with lower critical energy and further improves lifetime. A heuristic for distributed implementation of each policy is also presented.
- Authors: Azad, Arman , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Journal article
- Relation: IEEE Transactions on Mobile Computing Vol. 10, no. 7 (2011), p. 927-940
- Full Text:
- Reviewed:
- Description: Transmission policy, in addition to topology control, routing, and MAC protocols, can play a vital role in extending network lifetime. Existing transmission policies, however, cause an extremely unbalanced energy usage that contributes to early demise of some sensors reducing overall network's lifetime drastically. Considering cocentric rings around the sink, we decompose the transmission distance of traditional multihop scheme into two parts: ring thickness and hop size, analyze the traffic and energy usage distribution among sensors and determine how energy usage varies and critical ring shifts with hop size. Based on above observations, we propose a transmission scheme and determine the optimal ring thickness and hop size by formulating network lifetime as an optimization problem. Numerical results show substantial improvements in terms of network lifetime and energy usage distribution over existing policies. Two other variations of this policy are also presented by redefining the optimization problem considering: 1) concomitant hop size variation by sensors over lifetime along with optimal duty cycles, and 2) a distinct set of hop sizes for sensors in each ring. Both variations bring increasingly uniform energy usage with lower critical energy and further improves lifetime. A heuristic for distributed implementation of each policy is also presented.
Wake-up timer and binary exponential backoff for ZigBee-based wireless sensor network for flexible movement control system of a self-lifting scaffold
- Liang, Hua, Yang, Guangxiang, Xu, Ye, Gondal, Iqbal, Wu, Chao
- Authors: Liang, Hua , Yang, Guangxiang , Xu, Ye , Gondal, Iqbal , Wu, Chao
- Date: 2016
- Type: Text , Journal article
- Relation: International Journal of Distributed Sensor Networks Vol. 12, no. 9 (2016), p. 1-12
- Full Text:
- Reviewed:
- Description: Synchronous movement of attached self-lifting scaffolds is traditionally monitored with wired sensors in high-rise building construction, which limits their flexibility of movements. A ZigBee-based wireless sensor system has been suggested in this article to prove the effectiveness of wireless sensor networks in actual implementation. Two optoelectronic sensors are integrated into a ZigBee node for measuring the displacement of attached self-lifting scaffolds. The proposed wireless sensor network combines an end device and a coordinator to allow easy replacement of sensors as compared to a wired network. A wake-up timer algorithm is proposed to reduce the transmitting power during continuous wireless data communication in the wireless sensor network. Furthermore, a variant binary exponential backoff transmission algorithm for data loss avoidance is proposed. The variant binary exponential backoff algorithm reduces packet collisions during simultaneous access by increasing the randomizing moments at nodes attempting to access the wireless channels. The performance of three of the proposed modules - a cable sensor, a 315-MHz sensor, and a ZigBee sensor - is evaluated in terms of packet delivery ratio and the end-to-end delay of a ZigBee-based wireless sensor network. The experimental results show that the proposed variant binary exponential backoff transmission algorithm achieves a higher packet delivery ratio at the cost of higher delays. The average cost of the developed ZigBee-based wireless sensor network decreased by 24% compared with the cable sensor. The power consumption of ZigBee is approximately 53.75% of the 315-MHz sensor. The average current consumption is reduced by approximately 1.5 mA with the wake-up timer algorithm at the same sampling rate. © The Author(s) 2016.
- Authors: Liang, Hua , Yang, Guangxiang , Xu, Ye , Gondal, Iqbal , Wu, Chao
- Date: 2016
- Type: Text , Journal article
- Relation: International Journal of Distributed Sensor Networks Vol. 12, no. 9 (2016), p. 1-12
- Full Text:
- Reviewed:
- Description: Synchronous movement of attached self-lifting scaffolds is traditionally monitored with wired sensors in high-rise building construction, which limits their flexibility of movements. A ZigBee-based wireless sensor system has been suggested in this article to prove the effectiveness of wireless sensor networks in actual implementation. Two optoelectronic sensors are integrated into a ZigBee node for measuring the displacement of attached self-lifting scaffolds. The proposed wireless sensor network combines an end device and a coordinator to allow easy replacement of sensors as compared to a wired network. A wake-up timer algorithm is proposed to reduce the transmitting power during continuous wireless data communication in the wireless sensor network. Furthermore, a variant binary exponential backoff transmission algorithm for data loss avoidance is proposed. The variant binary exponential backoff algorithm reduces packet collisions during simultaneous access by increasing the randomizing moments at nodes attempting to access the wireless channels. The performance of three of the proposed modules - a cable sensor, a 315-MHz sensor, and a ZigBee sensor - is evaluated in terms of packet delivery ratio and the end-to-end delay of a ZigBee-based wireless sensor network. The experimental results show that the proposed variant binary exponential backoff transmission algorithm achieves a higher packet delivery ratio at the cost of higher delays. The average cost of the developed ZigBee-based wireless sensor network decreased by 24% compared with the cable sensor. The power consumption of ZigBee is approximately 53.75% of the 315-MHz sensor. The average current consumption is reduced by approximately 1.5 mA with the wake-up timer algorithm at the same sampling rate. © The Author(s) 2016.
PFARS : Enhancing throughput and lifetime of heterogeneous WSNs through power-aware fusion, aggregation, and routing scheme
- Khan, Rahim, Zakarya, Muhammad, Tan, Zhiyuan, Usman, Muhammad, Jan, Mian, Khan, Mukhtaj
- Authors: Khan, Rahim , Zakarya, Muhammad , Tan, Zhiyuan , Usman, Muhammad , Jan, Mian , Khan, Mukhtaj
- Date: 2019
- Type: Text , Journal article
- Relation: International Journal of Communication Systems Vol. 32, no. 18 (Dec 2019), p. 21
- Full Text:
- Reviewed:
- Description: Heterogeneous wireless sensor networks (WSNs) consist of resource-starving nodes that face a challenging task of handling various issues such as data redundancy, data fusion, congestion control, and energy efficiency. In these networks, data fusion algorithms process the raw data generated by a sensor node in an energy-efficient manner to reduce redundancy, improve accuracy, and enhance the network lifetime. In literature, these issues are addressed individually, and most of the proposed solutions are either application-specific or too complex that make their implementation unrealistic, specifically, in a resource-constrained environment. In this paper, we propose a novel node-level data fusion algorithm for heterogeneous WSNs to detect noisy data and replace them with highly refined data. To minimize the amount of transmitted data, a hybrid data aggregation algorithm is proposed that performs in-network processing while preserving the reliability of gathered data. This combination of data fusion and data aggregation algorithms effectively handle the aforementioned issues by ensuring an efficient utilization of the available resources. Apart from fusion and aggregation, a biased traffic distribution algorithm is introduced that considerably increases the overall lifetime of heterogeneous WSNs. The proposed algorithm performs the tedious task of traffic distribution according to the network's statistics, ie, the residual energy of neighboring nodes and their importance from a network's connectivity perspective. All our proposed algorithms were tested on a real-time dataset obtained through our deployed heterogeneous WSN in an orange orchard and also on publicly available benchmark datasets. Experimental results verify that our proposed algorithms outperform the existing approaches in terms of various performance metrics such as throughput, lifetime, data accuracy, computational time, and delay.
- Authors: Khan, Rahim , Zakarya, Muhammad , Tan, Zhiyuan , Usman, Muhammad , Jan, Mian , Khan, Mukhtaj
- Date: 2019
- Type: Text , Journal article
- Relation: International Journal of Communication Systems Vol. 32, no. 18 (Dec 2019), p. 21
- Full Text:
- Reviewed:
- Description: Heterogeneous wireless sensor networks (WSNs) consist of resource-starving nodes that face a challenging task of handling various issues such as data redundancy, data fusion, congestion control, and energy efficiency. In these networks, data fusion algorithms process the raw data generated by a sensor node in an energy-efficient manner to reduce redundancy, improve accuracy, and enhance the network lifetime. In literature, these issues are addressed individually, and most of the proposed solutions are either application-specific or too complex that make their implementation unrealistic, specifically, in a resource-constrained environment. In this paper, we propose a novel node-level data fusion algorithm for heterogeneous WSNs to detect noisy data and replace them with highly refined data. To minimize the amount of transmitted data, a hybrid data aggregation algorithm is proposed that performs in-network processing while preserving the reliability of gathered data. This combination of data fusion and data aggregation algorithms effectively handle the aforementioned issues by ensuring an efficient utilization of the available resources. Apart from fusion and aggregation, a biased traffic distribution algorithm is introduced that considerably increases the overall lifetime of heterogeneous WSNs. The proposed algorithm performs the tedious task of traffic distribution according to the network's statistics, ie, the residual energy of neighboring nodes and their importance from a network's connectivity perspective. All our proposed algorithms were tested on a real-time dataset obtained through our deployed heterogeneous WSN in an orange orchard and also on publicly available benchmark datasets. Experimental results verify that our proposed algorithms outperform the existing approaches in terms of various performance metrics such as throughput, lifetime, data accuracy, computational time, and delay.
- «
- ‹
- 1
- ›
- »