Prediction of drillability of rocks with strength properties using a hybrid GA-ANN technique
- Khandelwal, Manoj, Armaghani, Danial
- Authors: Khandelwal, Manoj , Armaghani, Danial
- Date: 2016
- Type: Text , Journal article
- Relation: Geotechnical and Geological Engineering Vol. 34, no. 2 (2016), p. 605-620
- Full Text:
- Reviewed:
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN.
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN. © 2015 Springer International Publishing Switzerland
- Authors: Khandelwal, Manoj , Armaghani, Danial
- Date: 2016
- Type: Text , Journal article
- Relation: Geotechnical and Geological Engineering Vol. 34, no. 2 (2016), p. 605-620
- Full Text:
- Reviewed:
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN.
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN. © 2015 Springer International Publishing Switzerland
Improved shear strength performance of compacted rubberized clays treated with sodium alginate biopolymer
- Soltani, Amin, Raeesi, Ramin, Taheri, Abbas, Deng, An, Mirzababaei, Mehdi
- Authors: Soltani, Amin , Raeesi, Ramin , Taheri, Abbas , Deng, An , Mirzababaei, Mehdi
- Date: 2021
- Type: Text , Journal article
- Relation: Polymers Vol. 13, no. 5 (2021), p. 1-21
- Full Text:
- Reviewed:
- Description: This study examines the potential use of sodium alginate (SA) biopolymer as an environmentally sustainable agent for the stabilization of rubberized soil blends prepared using a high plasticity clay soil and tire-derived ground rubber (GR). The experimental program consisted of uniaxial compression and scanning electron microscopy (SEM) tests; the former was performed on three soil–GR blends (with GR-to-soil mass ratios of 0%, 5% and 10%) compacted (and cured for 1, 4, 7 and 14 d) employing distilled water and three SA solutions—prepared at SA-to-water (mass-tovolume) dosage ratios of 5, 10 and 15 g/L—as the compaction liquid. For any given GR content, the greater the SA dosage and/or the longer the curing duration, the higher the uniaxial compressive strength (UCS), with only minor added benefits beyond seven days of curing. This behaviour was attributed to the formation and propagation of so-called “cationic bridges” (developed as a result of a “Ca2+/Mg2+
- Authors: Soltani, Amin , Raeesi, Ramin , Taheri, Abbas , Deng, An , Mirzababaei, Mehdi
- Date: 2021
- Type: Text , Journal article
- Relation: Polymers Vol. 13, no. 5 (2021), p. 1-21
- Full Text:
- Reviewed:
- Description: This study examines the potential use of sodium alginate (SA) biopolymer as an environmentally sustainable agent for the stabilization of rubberized soil blends prepared using a high plasticity clay soil and tire-derived ground rubber (GR). The experimental program consisted of uniaxial compression and scanning electron microscopy (SEM) tests; the former was performed on three soil–GR blends (with GR-to-soil mass ratios of 0%, 5% and 10%) compacted (and cured for 1, 4, 7 and 14 d) employing distilled water and three SA solutions—prepared at SA-to-water (mass-tovolume) dosage ratios of 5, 10 and 15 g/L—as the compaction liquid. For any given GR content, the greater the SA dosage and/or the longer the curing duration, the higher the uniaxial compressive strength (UCS), with only minor added benefits beyond seven days of curing. This behaviour was attributed to the formation and propagation of so-called “cationic bridges” (developed as a result of a “Ca2+/Mg2+
Assessing cohesion of the rocks proposing a new intelligent technique namely group method of data handling
- Chen, Wusi, Khandelwal, Manoj, Murlidhar, Bhatawdekar, Bui, Dieu, Tahir, Mahmood, Katebi, Javad
- Authors: Chen, Wusi , Khandelwal, Manoj , Murlidhar, Bhatawdekar , Bui, Dieu , Tahir, Mahmood , Katebi, Javad
- Date: 2020
- Type: Text , Journal article
- Relation: Engineering with Computers Vol. 36, no. 2 (2020), p. 783-793
- Full Text:
- Reviewed:
- Description: In this study, evaluation and prediction of rock cohesion is assessed using multiple regression as well as group method of data handling (GMDH). It is a well-known fact that cohesion is the most crucial rock shear strength parameter, which is a key parameter for the stability evaluation of some geotechnical structures such as rock slope. To fulfill the aim of this study, a database of three model input parameters, i.e., p wave velocity, uniaxial compressive strength and Brazilian tensile strength and one model output, which is cohesion of limestone samples was prepared and utilized by GMDH. Different GMDH models with neurons and layers and selection pressure were tested and assessed. It was found that GMDH model number 4 (with 8 layers) shows the best performance among all of tested models between the input and output parameters for the prediction and assessment of rock cohesion with coefficient of determination (R2) values of 0.928 and 0.929, root mean square error values of 0.3545 and 0.3154 for training and testing datasets, respectively. Multiple regression analysis was also performed on the same database and R2 values were obtained as 0.8173 and 0.8313 between input and output parameters for the training and testing of the models, respectively. The GMDH technique developed in this study is introduced as a new model in field of rock shear strength parameters. © 2019, Springer-Verlag London Ltd., part of Springer Nature.
- Authors: Chen, Wusi , Khandelwal, Manoj , Murlidhar, Bhatawdekar , Bui, Dieu , Tahir, Mahmood , Katebi, Javad
- Date: 2020
- Type: Text , Journal article
- Relation: Engineering with Computers Vol. 36, no. 2 (2020), p. 783-793
- Full Text:
- Reviewed:
- Description: In this study, evaluation and prediction of rock cohesion is assessed using multiple regression as well as group method of data handling (GMDH). It is a well-known fact that cohesion is the most crucial rock shear strength parameter, which is a key parameter for the stability evaluation of some geotechnical structures such as rock slope. To fulfill the aim of this study, a database of three model input parameters, i.e., p wave velocity, uniaxial compressive strength and Brazilian tensile strength and one model output, which is cohesion of limestone samples was prepared and utilized by GMDH. Different GMDH models with neurons and layers and selection pressure were tested and assessed. It was found that GMDH model number 4 (with 8 layers) shows the best performance among all of tested models between the input and output parameters for the prediction and assessment of rock cohesion with coefficient of determination (R2) values of 0.928 and 0.929, root mean square error values of 0.3545 and 0.3154 for training and testing datasets, respectively. Multiple regression analysis was also performed on the same database and R2 values were obtained as 0.8173 and 0.8313 between input and output parameters for the training and testing of the models, respectively. The GMDH technique developed in this study is introduced as a new model in field of rock shear strength parameters. © 2019, Springer-Verlag London Ltd., part of Springer Nature.
- «
- ‹
- 1
- ›
- »