List of Titles

A sequential extraction procedure for acid sulfate soils : Partitioning of iron

- Claff, Salirian, Sullivan, Leigh, Burton, Edward, Bush, Richard

Authors: Claff, Salirian , Sullivan, Leigh , Burton, Edward , Bush, Richard
Date: 2010
Type: Text , Journal article
Relation: Geoderma Vol. 155, no. 3-4 (2010), p. 224-230
Full Text: false
Reviewed:
Description: A new sequential extraction scheme for acid sulfate soil materials has been evaluated for iron partitioning in a range of synthetic iron-bearing minerals and natural acid sulfate soil materials. This sequential extraction procedure employs six steps to quantify (1) exchangeable (magnesium chloride extractable), (2) acid (hydrochloric acid) soluble, (3) reactive organic-bound (pyrophosphate extractable), (4) crystalline oxide (citrate buffered dithionite (CBD)) extractable, (5) pyrite-bound (nitric acid extractable) and (6) residual (acid/peroxide digestible) forms of iron. Given its intended use for acid sulfate soil materials that frequently contain pyrite, a primary aim of this new sequential extraction procedure was to differentiate iron bound in pyrite from iron contained in other minerals. The results demonstrated that dissolution of pyrite was effectively isolated in the pyrite-bound extraction step, with dissolution of other iron mineral phases (i.e. akaganeite, ferrihydrite, goethite, hematite, jarosite, magnetite, and schwertmannite) occurring within the other five extraction steps. Following a systematic examination of these synthetic iron mineral phases, the sequential extraction scheme was applied to an acid sulfate soil profile, with detailed data presented for two soil layers: one representative of the sulfidic (unoxidised) conditions, and the other sulfuric (oxidised) conditions. Partitioning data for pyrite-bound iron in the acid sulfate soil profile showed good agreement with that calculated via the independently measured pyrite-bound reduced sulfur. This study indicates that the new sequential extraction procedure is suitable for the assessment of iron partitioning in acid sulfate soil materials. © 2009 Elsevier B.V. All rights reserved.

Jarosite quantification in soils : An enhanced sequential extraction procedure

- Vithana, Chamindra, Sullivan, Leigh, Bush, Richard, Burton, Edward

Authors: Vithana, Chamindra , Sullivan, Leigh , Bush, Richard , Burton, Edward
Date: 2014
Type: Text , Journal article
Relation: Applied Geochemistry Vol. 51, no. (2014), p. 130-138
Full Text: false
Reviewed:
Description: A two-step sequential extraction procedure established for the quantification of acidity producing ferric and ferrous sulfate minerals such as melanterite and jarosite in acid mine wastes was evaluated for quantification of jarosite spiked in soils. The procedure involves in sequence anoxic water extraction, roasting the solid residue after anoxic water extraction at 550. °C for 1. h, and 4. M HCl extraction of the roasted solid. Soil and quartz samples were spiked with known amounts of synthetic and natural jarosite and their recovery was measured using the suggested two-step sequential extraction procedure. The recoveries of synthetic and natural jarosite were calculated on the basis of the S contents of the initially spiked jarosite in soil and quartz samples. Less than 50% of the spiked jarosite was recovered. The missing S is partially attributable to the retention of jarosite by the Teflon filter membrane used during the filtration of the anoxic water extract. Further investigations also demonstrated a lower 4. M HCl-S extractability from jarosite samples roasted at 550. °C than those roasted at 450. °C. S recovery from jarosite-spiked quartz samples increased to 45-70% by replacing the Teflon filter membrane with the Cellulose Acetate filter membrane and including this filter paper in the second step roasting. This modified method is a step forward in the development of methods to accurately and reliably quantify jarosite in soil materials. © 2014 Elsevier Ltd.

Showing items 1 - 2 of 2