Rotational traction testing : How can we improve the current test device?
- Twomey, Dara, Connell, Monique, Petrass, Lauren
- Authors: Twomey, Dara , Connell, Monique , Petrass, Lauren
- Date: 2014
- Type: Text , Conference paper
- Relation: 2014 10th Conference of the International Sports Engineering Association, ISEA 2014; Sheffield, United Kingdom; 14th-17th July 2014; published in Procedia Engineering, Vol. 72, p. 919-924
- Full Text:
- Reviewed:
- Description: Rotational resistance is an important sports surface property in optimising both performance and safety for participants. Despite various attempts to create valid devices to measure the rotational traction, the Studded Boot Apparatus (SBA) originally developed in 1975 is still used in the synthetic turf standards of many governing bodies of sport. In addition to validity limitations, poor operator reliability of the SBA has been reported and it was postulated that the manual nature of the device contributed significantly to this result. Therefore, the aim of this paper is to present data on the automation of the SBA and to discuss the reliability and validity issues of the device. An automated version of the SBA was developed called the UB Turf Tester (UBTT) and data was collected by ten inexperienced operators using the original SBA and the UBTT. Testing was undertaken on a synthetic turf and each operator completed ten trials with each device. Despite a slightly greater peak traction value for the UBTT, there was no significant difference between the peak traction for the two devices, F 1,2 = 0.341, p = 0.57. Greater reliability was found between operators for the UB Turf Tester. Given that the SBA is still commonly used to comply with standards, achieving the highest level of intra- and inter-operator reliability is both desirable and invaluable. However, the research on the validity of the device also needs to continue. Interestingly, limitations of the device were identified when it was first developed but very few adaptations have been implemented since then. Undoubtedly, the interaction between the human and the surface is a complex phenomenon but the weight force, the level of penetration, the pattern, shape and position of the cleats and the possibility of measuring rotational stiffness rather than peak traction all require further discussion and investigation.
- Authors: Twomey, Dara , Connell, Monique , Petrass, Lauren
- Date: 2014
- Type: Text , Conference paper
- Relation: 2014 10th Conference of the International Sports Engineering Association, ISEA 2014; Sheffield, United Kingdom; 14th-17th July 2014; published in Procedia Engineering, Vol. 72, p. 919-924
- Full Text:
- Reviewed:
- Description: Rotational resistance is an important sports surface property in optimising both performance and safety for participants. Despite various attempts to create valid devices to measure the rotational traction, the Studded Boot Apparatus (SBA) originally developed in 1975 is still used in the synthetic turf standards of many governing bodies of sport. In addition to validity limitations, poor operator reliability of the SBA has been reported and it was postulated that the manual nature of the device contributed significantly to this result. Therefore, the aim of this paper is to present data on the automation of the SBA and to discuss the reliability and validity issues of the device. An automated version of the SBA was developed called the UB Turf Tester (UBTT) and data was collected by ten inexperienced operators using the original SBA and the UBTT. Testing was undertaken on a synthetic turf and each operator completed ten trials with each device. Despite a slightly greater peak traction value for the UBTT, there was no significant difference between the peak traction for the two devices, F 1,2 = 0.341, p = 0.57. Greater reliability was found between operators for the UB Turf Tester. Given that the SBA is still commonly used to comply with standards, achieving the highest level of intra- and inter-operator reliability is both desirable and invaluable. However, the research on the validity of the device also needs to continue. Interestingly, limitations of the device were identified when it was first developed but very few adaptations have been implemented since then. Undoubtedly, the interaction between the human and the surface is a complex phenomenon but the weight force, the level of penetration, the pattern, shape and position of the cleats and the possibility of measuring rotational stiffness rather than peak traction all require further discussion and investigation.
Adaptation of quadtree meshes in the scaled boundary finite element method for crack propagation modelling
- Ooi, Ean Tat, Man, Hou, Natarajan, Sundararajan, Song, Chongmin
- Authors: Ooi, Ean Tat , Man, Hou , Natarajan, Sundararajan , Song, Chongmin
- Date: 2015
- Type: Text , Journal article
- Relation: Engineering Fracture Mechanics Vol. 144, no. (2015), p. 101-117
- Full Text:
- Reviewed:
- Description: A crack propagation modelling technique combining the scaled boundary finite element method and quadtree meshes is developed. This technique automatically satisfies the compatibility requirement between adjacent quadtree cells irrespective of the presence of hanging nodes. The quadtree structure facilitates efficient data storage and rapid computations. Only a single cell is required to accurately model the stress field near crack tips. Crack growth is modelled by splitting the cells in the mesh into two. The resulting polygons are directly modelled by the scaled boundary formulation with minimal changes to the mesh. Four numerical examples demonstrate the salient features of the technique. © 2015.
- Authors: Ooi, Ean Tat , Man, Hou , Natarajan, Sundararajan , Song, Chongmin
- Date: 2015
- Type: Text , Journal article
- Relation: Engineering Fracture Mechanics Vol. 144, no. (2015), p. 101-117
- Full Text:
- Reviewed:
- Description: A crack propagation modelling technique combining the scaled boundary finite element method and quadtree meshes is developed. This technique automatically satisfies the compatibility requirement between adjacent quadtree cells irrespective of the presence of hanging nodes. The quadtree structure facilitates efficient data storage and rapid computations. Only a single cell is required to accurately model the stress field near crack tips. Crack growth is modelled by splitting the cells in the mesh into two. The resulting polygons are directly modelled by the scaled boundary formulation with minimal changes to the mesh. Four numerical examples demonstrate the salient features of the technique. © 2015.
Annual ryegrass (Lolium rigidum Gaud) competition altered wheat grain quality : A study under elevated atmospheric CO2 levels and drought conditions
- Fernando, Nimesha, Florentine, Singarayer, Naiker, Mani, Panozzo, Joe, Chauhan, Bhagirath
- Authors: Fernando, Nimesha , Florentine, Singarayer , Naiker, Mani , Panozzo, Joe , Chauhan, Bhagirath
- Date: 2019
- Type: Text , Journal article
- Relation: Food Chemistry Vol. 276, no. (2019), p. 285-290
- Full Text:
- Reviewed:
- Description: Annual ryegrass is one of the most serious, costly weeds of winter cropping systems in Australia. To determine whether its competition-mediated plant defence mechanisms effect on wheat grain quality, wheat (cv. Yitpi) and annual ryegrass were grown under two levels of CO2 (400 ppm; (a[CO2]) vs 700 ppm; (e[CO2]), two levels of water (well-watered vs drought) and two types of competition (wheat only; (W), and wheatxannual ryegrass; (W x R) with four replicates. The competitionx[CO2] interaction had a significant effect on wheat grain protein content, where it was increased in W x R under both e[CO2] (+ 17%) and a[CO2] (+ 21%). Grain yield, total grain reducing power and phenolic content were significantly affected by [CO2] x drought x competition. In a summary, annual ryegrass competition significantly altered the wheat grain quality under both [CO2] levels (depending on the soil water level), while also decreasing the grain yield.
- Authors: Fernando, Nimesha , Florentine, Singarayer , Naiker, Mani , Panozzo, Joe , Chauhan, Bhagirath
- Date: 2019
- Type: Text , Journal article
- Relation: Food Chemistry Vol. 276, no. (2019), p. 285-290
- Full Text:
- Reviewed:
- Description: Annual ryegrass is one of the most serious, costly weeds of winter cropping systems in Australia. To determine whether its competition-mediated plant defence mechanisms effect on wheat grain quality, wheat (cv. Yitpi) and annual ryegrass were grown under two levels of CO2 (400 ppm; (a[CO2]) vs 700 ppm; (e[CO2]), two levels of water (well-watered vs drought) and two types of competition (wheat only; (W), and wheatxannual ryegrass; (W x R) with four replicates. The competitionx[CO2] interaction had a significant effect on wheat grain protein content, where it was increased in W x R under both e[CO2] (+ 17%) and a[CO2] (+ 21%). Grain yield, total grain reducing power and phenolic content were significantly affected by [CO2] x drought x competition. In a summary, annual ryegrass competition significantly altered the wheat grain quality under both [CO2] levels (depending on the soil water level), while also decreasing the grain yield.
Lost in optimisation of water distribution systems? A literature review of system operation
- Mala-Jetmarova, Helena, Sultanova, Nargiz, Savic, Dragan
- Authors: Mala-Jetmarova, Helena , Sultanova, Nargiz , Savic, Dragan
- Date: 2017
- Type: Text , Journal article , Review
- Relation: Environmental Modelling and Software Vol. 93, no. (2017), p. 209-254
- Full Text:
- Reviewed:
- Description: Optimisation of the operation of water distribution systems has been an active research field for almost half a century. It has focused mainly on optimal pump operation to minimise pumping costs and optimal water quality management to ensure that standards at customer nodes are met. This paper provides a systematic review by bringing together over two hundred publications from the past three decades, which are relevant to operational optimisation of water distribution systems, particularly optimal pump operation, valve control and system operation for water quality purposes of both urban drinking and regional multiquality water distribution systems. Uniquely, it also contains substantial and thorough information for over one hundred publications in a tabular form, which lists optimisation models inclusive of objectives, constraints, decision variables, solution methodologies used and other details. Research challenges in terms of simulation models, optimisation model formulation, selection of optimisation method and postprocessing needs have also been identified. © 2017
- Authors: Mala-Jetmarova, Helena , Sultanova, Nargiz , Savic, Dragan
- Date: 2017
- Type: Text , Journal article , Review
- Relation: Environmental Modelling and Software Vol. 93, no. (2017), p. 209-254
- Full Text:
- Reviewed:
- Description: Optimisation of the operation of water distribution systems has been an active research field for almost half a century. It has focused mainly on optimal pump operation to minimise pumping costs and optimal water quality management to ensure that standards at customer nodes are met. This paper provides a systematic review by bringing together over two hundred publications from the past three decades, which are relevant to operational optimisation of water distribution systems, particularly optimal pump operation, valve control and system operation for water quality purposes of both urban drinking and regional multiquality water distribution systems. Uniquely, it also contains substantial and thorough information for over one hundred publications in a tabular form, which lists optimisation models inclusive of objectives, constraints, decision variables, solution methodologies used and other details. Research challenges in terms of simulation models, optimisation model formulation, selection of optimisation method and postprocessing needs have also been identified. © 2017
Comparison of multiple surrogates for 3D CFD model in tidal farm optimisation
- Moore, William, Mala-Jetmarova, Helena, Gebreslassie, Mulualem, Tabor, Gavin, Belmont, Michael, Savic, Dragan
- Authors: Moore, William , Mala-Jetmarova, Helena , Gebreslassie, Mulualem , Tabor, Gavin , Belmont, Michael , Savic, Dragan
- Date: 2016
- Type: Text , Conference proceedings
- Relation: 12th International Conference on Hydroinformatics - Smart Water for the Future, HIC 2016; Songdo Convensialncheon, South Korea; 21st-26th August 2016; published in Procedia Engineering Vol. 154, p. 1132-1139
- Full Text:
- Reviewed:
- Description: Marine currents have been identified as a considerable renewable energy source. Therefore, in recent years, research on optimising tidal stream farm layouts in order to maximise power output has emerged. Traditionally, computational fluid dynamics (CFD) models are used to model power output, but their computational cost is prohibitive within an optimisation algorithm. This paper uses surrogate models in place of CFD simulations to optimise the layout of tidal stream farm layouts. Surrogates are functions which are designed to emulate the behaviour of other models with radically reduced computational expense. Two surrogate models are applied and compared: artificial neural network (ANN) and k-nearest neighbours regression (k-NN). We measure their suitability by four criteria: accuracy, efficiency, robustness and performance within an optimisation algorithm. The results reveal that the ANN surrogate is superior in every criteria to the k-NN surrogate. However, the k-NN surrogate is also able to perform adequate optimisation. Finally, we demonstrate that optimisation relying solely on surrogate models is a viable approach, with dramatically reduced computational expense of optimisation. © 2016 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.
- Description: Procedia Engineering
- Authors: Moore, William , Mala-Jetmarova, Helena , Gebreslassie, Mulualem , Tabor, Gavin , Belmont, Michael , Savic, Dragan
- Date: 2016
- Type: Text , Conference proceedings
- Relation: 12th International Conference on Hydroinformatics - Smart Water for the Future, HIC 2016; Songdo Convensialncheon, South Korea; 21st-26th August 2016; published in Procedia Engineering Vol. 154, p. 1132-1139
- Full Text:
- Reviewed:
- Description: Marine currents have been identified as a considerable renewable energy source. Therefore, in recent years, research on optimising tidal stream farm layouts in order to maximise power output has emerged. Traditionally, computational fluid dynamics (CFD) models are used to model power output, but their computational cost is prohibitive within an optimisation algorithm. This paper uses surrogate models in place of CFD simulations to optimise the layout of tidal stream farm layouts. Surrogates are functions which are designed to emulate the behaviour of other models with radically reduced computational expense. Two surrogate models are applied and compared: artificial neural network (ANN) and k-nearest neighbours regression (k-NN). We measure their suitability by four criteria: accuracy, efficiency, robustness and performance within an optimisation algorithm. The results reveal that the ANN surrogate is superior in every criteria to the k-NN surrogate. However, the k-NN surrogate is also able to perform adequate optimisation. Finally, we demonstrate that optimisation relying solely on surrogate models is a viable approach, with dramatically reduced computational expense of optimisation. © 2016 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.
- Description: Procedia Engineering
A review of practical tools for rapid monitoring of membrane bioreactors
- Scholes, Emily, Verheyen, Vincent, Brook-Carter, Phillip
- Authors: Scholes, Emily , Verheyen, Vincent , Brook-Carter, Phillip
- Date: 2016
- Type: Text , Journal article , Review
- Relation: Water Research Vol. 102, no. (2016), p. 252-262
- Full Text:
- Reviewed:
- Description: The production of high quality effluent from membrane bioreactors (MBRs) arguably requires less supervision than conventional activated sludge (CAS) processes. Nevertheless, the use of membranes brings additional issues of activated sludge filterability, cake layer formation and membrane fouling. From a practical standpoint, process engineers and operators require simple tools which offer timely information about the biological health and filterability of the mixed liquor as well as risks of membrane fouling. To this end, a range of analytical tools and biological assays are critically reviewed from this perspective. This review recommends that Capillary Suction Time (CST) analysis along with Total Suspended and Volatile Solids (TSS/VSS) analysis is used daily. For broad characterisation, total carbon and nitrogen analysis offer significant advantages over the commonly used chemical and biological oxygen demand (COD/BOD) analyses. Of the technologies for determining the vitality of the microbial biomass the most robust and reproducible, are the second generation adenosine-5'-triphosphate (ATP) test kits. Extracellular polymer concentrations are best monitored by measurement of turbidity after centrifugation. Taken collectively these tools can be used routinely to ensure timely intervention and smoother operation of MBR systems. © 2016 Elsevier Ltd.
- Authors: Scholes, Emily , Verheyen, Vincent , Brook-Carter, Phillip
- Date: 2016
- Type: Text , Journal article , Review
- Relation: Water Research Vol. 102, no. (2016), p. 252-262
- Full Text:
- Reviewed:
- Description: The production of high quality effluent from membrane bioreactors (MBRs) arguably requires less supervision than conventional activated sludge (CAS) processes. Nevertheless, the use of membranes brings additional issues of activated sludge filterability, cake layer formation and membrane fouling. From a practical standpoint, process engineers and operators require simple tools which offer timely information about the biological health and filterability of the mixed liquor as well as risks of membrane fouling. To this end, a range of analytical tools and biological assays are critically reviewed from this perspective. This review recommends that Capillary Suction Time (CST) analysis along with Total Suspended and Volatile Solids (TSS/VSS) analysis is used daily. For broad characterisation, total carbon and nitrogen analysis offer significant advantages over the commonly used chemical and biological oxygen demand (COD/BOD) analyses. Of the technologies for determining the vitality of the microbial biomass the most robust and reproducible, are the second generation adenosine-5'-triphosphate (ATP) test kits. Extracellular polymer concentrations are best monitored by measurement of turbidity after centrifugation. Taken collectively these tools can be used routinely to ensure timely intervention and smoother operation of MBR systems. © 2016 Elsevier Ltd.
A review of the scaled boundary finite element method for two-dimensional linear elastic fracture mechanics
- Song, Chongmin, Ooi, Ean Tat, Natarajan, Sundararajan
- Authors: Song, Chongmin , Ooi, Ean Tat , Natarajan, Sundararajan
- Date: 2018
- Type: Text , Journal article , Review
- Relation: Engineering Fracture Mechanics Vol. 187, no. (2018), p. 45-73
- Full Text:
- Reviewed:
- Description: The development and the application of the scaled boundary finite element method for fracture analysis is reviewed. In this method, polygonal elements (referred to as subdomains) of arbitrary number of edges are constructed, with the only limitation that the whole boundary is directly visible from the scaling centre. The element solution is semi-analytical. When applied to two-dimensional linear fracture mechanics, any kinds of stress singularities are represented analytically without local refinement, special elements and enrichment functions. The flexibility of polygons to represent arbitrary geometric shapes leads to simple yet efficient remeshing algorithms to model crack propagation. Coupling procedures with the extended finite element method, meshless method and boundary element method to handle changes in the crack morphology have been established. These developments result in an efficient framework for fracture modelling. Examples of applications are provided to demonstrate their feasibility. © 2017 Elsevier Ltd
- Authors: Song, Chongmin , Ooi, Ean Tat , Natarajan, Sundararajan
- Date: 2018
- Type: Text , Journal article , Review
- Relation: Engineering Fracture Mechanics Vol. 187, no. (2018), p. 45-73
- Full Text:
- Reviewed:
- Description: The development and the application of the scaled boundary finite element method for fracture analysis is reviewed. In this method, polygonal elements (referred to as subdomains) of arbitrary number of edges are constructed, with the only limitation that the whole boundary is directly visible from the scaling centre. The element solution is semi-analytical. When applied to two-dimensional linear fracture mechanics, any kinds of stress singularities are represented analytically without local refinement, special elements and enrichment functions. The flexibility of polygons to represent arbitrary geometric shapes leads to simple yet efficient remeshing algorithms to model crack propagation. Coupling procedures with the extended finite element method, meshless method and boundary element method to handle changes in the crack morphology have been established. These developments result in an efficient framework for fracture modelling. Examples of applications are provided to demonstrate their feasibility. © 2017 Elsevier Ltd
Inter-relationships between ADHD, ODD and impulsivity dimensions in emerging adults revealed by network analysis: extending the ‘trait impulsivity hypothesis’
- Gomez, Rapson, Stavropoulos, Vasileios, Watson, Shaun, Brown, Taylor, Chen, Wai
- Authors: Gomez, Rapson , Stavropoulos, Vasileios , Watson, Shaun , Brown, Taylor , Chen, Wai
- Date: 2022
- Type: Text , Journal article
- Relation: Heliyon Vol. 8, no. 10 (2022), p.
- Full Text:
- Reviewed:
- Description: Background: The trait-impulsivity hypothesis posits impulsivity as the underlying substrate of Attention-deficit/hyperactivity disorder (ADHD) and Oppositional defiant disorder (ODD) symptom expressions. The current study applied network analysis to evaluate the inter-relationships of dimensions within ADHD (inattention and hyperactivity/impulsivity) and ODD (anger/irritable, vindictiveness, and argumentative/defiant behavior) with components of impulsivity as captured by the UPPS-P model (negative urgency, lack of premeditation, lack of perseverance, sensation seeking, and positive urgency). Method: A total of 324 emerging adults (women = 246) from the general community completed questionnaires covering these dimensions. Results: Our findings showed that the ADHD and ODD dimensions were associated differentially with different types of impulsivity, in their unique patterns of network connectivities, a possibility that has had little attention in the trait-impulsivity hypothesis literature. Conclusions: This study is the first to tease out the unique associations of the ADHD and ODD dimensions with different types of impulsivity, and in that way provide new contributions to our understanding of the existing trait impulsivity theory. Our findings would be especially relevant to those interested in understanding how different dimensions of trait impulsivity underly the ADHD and ODD dimensions. © 2022 The Authors
- Authors: Gomez, Rapson , Stavropoulos, Vasileios , Watson, Shaun , Brown, Taylor , Chen, Wai
- Date: 2022
- Type: Text , Journal article
- Relation: Heliyon Vol. 8, no. 10 (2022), p.
- Full Text:
- Reviewed:
- Description: Background: The trait-impulsivity hypothesis posits impulsivity as the underlying substrate of Attention-deficit/hyperactivity disorder (ADHD) and Oppositional defiant disorder (ODD) symptom expressions. The current study applied network analysis to evaluate the inter-relationships of dimensions within ADHD (inattention and hyperactivity/impulsivity) and ODD (anger/irritable, vindictiveness, and argumentative/defiant behavior) with components of impulsivity as captured by the UPPS-P model (negative urgency, lack of premeditation, lack of perseverance, sensation seeking, and positive urgency). Method: A total of 324 emerging adults (women = 246) from the general community completed questionnaires covering these dimensions. Results: Our findings showed that the ADHD and ODD dimensions were associated differentially with different types of impulsivity, in their unique patterns of network connectivities, a possibility that has had little attention in the trait-impulsivity hypothesis literature. Conclusions: This study is the first to tease out the unique associations of the ADHD and ODD dimensions with different types of impulsivity, and in that way provide new contributions to our understanding of the existing trait impulsivity theory. Our findings would be especially relevant to those interested in understanding how different dimensions of trait impulsivity underly the ADHD and ODD dimensions. © 2022 The Authors
Decoding employee ambidexterity : understanding drivers, constraints, and performance implications for thriving in the evolving work landscapes - a scoping review
- Joseph, Jane, Firmin, Sally, Oseni, Taiwo, Stranieri, Andrew
- Authors: Joseph, Jane , Firmin, Sally , Oseni, Taiwo , Stranieri, Andrew
- Date: 2023
- Type: Text , Journal article
- Relation: Heliyon Vol. 9, no. 12 (2023), p.
- Full Text:
- Reviewed:
- Description: Employee ambidexterity (EA) is becoming increasingly recognised as a significant factor in enhancing individual and organisational performance across diverse industries. Ambidexterity refers to the capacity to exploit and explore organisational resources simultaneously. Scholars from diverse industry sectors have been motivated to delve deeper into the topic of EA due to its growing popularity. The objective of conducting a scoping review was to scrutinise the existing literature and identify the key drivers and constraints that impact EA to thrive in the changing work landscape. The insights gained from this review can assist decision-makers in formulating effective strategies to cultivate the ambidexterity skills of their workforce and achieve desirable outcomes. This review adheres to the PRISMA-ScR protocol. Articles were obtained from databases including Scopus, Web of Science, and EBSCOhost (Academic Search Complete, Business Source Complete). The body of literature concerning EA is in its nascent stage. 23 articles assessing EA's performance outcomes were identified using targeted search terms and thorough screening. After conducting a thorough thematic analysis using the iterative categorisation (IC) technique, tailored for scoping a review, we successfully identified twenty-nine factors contributing to the enhancement of EA, meticulously organised into five distinct categories: organisational factors, social connectedness, employee behaviour, employee personality, and work environment related factors. Similarly, we discovered four factors that impede EA: functional tenure, team identification, bounded discretion, and conscientiousness. Our findings underscore the profound impact of employee ambidexterity on distinct types of performance. Among the sixteen types of performance reported to be enhanced by EA, ten are linked to individual performance, while six are tied to organisational performance. Notably, our analysis revealed that nearly all studies have relied on cross-sectional research methods except for one. However, we advocate for the exploration of longitudinal studies as they hold the promise of offering a more comprehensive understanding of EA. The paper presents valuable insights into how to cultivate ambidextrous capabilities in the workforce for unparalleled success in today's rapidly evolving work environment. Additionally, it identifies several intriguing avenues for future research that could further elucidate and bridge existing knowledge gaps. © 2023
- Authors: Joseph, Jane , Firmin, Sally , Oseni, Taiwo , Stranieri, Andrew
- Date: 2023
- Type: Text , Journal article
- Relation: Heliyon Vol. 9, no. 12 (2023), p.
- Full Text:
- Reviewed:
- Description: Employee ambidexterity (EA) is becoming increasingly recognised as a significant factor in enhancing individual and organisational performance across diverse industries. Ambidexterity refers to the capacity to exploit and explore organisational resources simultaneously. Scholars from diverse industry sectors have been motivated to delve deeper into the topic of EA due to its growing popularity. The objective of conducting a scoping review was to scrutinise the existing literature and identify the key drivers and constraints that impact EA to thrive in the changing work landscape. The insights gained from this review can assist decision-makers in formulating effective strategies to cultivate the ambidexterity skills of their workforce and achieve desirable outcomes. This review adheres to the PRISMA-ScR protocol. Articles were obtained from databases including Scopus, Web of Science, and EBSCOhost (Academic Search Complete, Business Source Complete). The body of literature concerning EA is in its nascent stage. 23 articles assessing EA's performance outcomes were identified using targeted search terms and thorough screening. After conducting a thorough thematic analysis using the iterative categorisation (IC) technique, tailored for scoping a review, we successfully identified twenty-nine factors contributing to the enhancement of EA, meticulously organised into five distinct categories: organisational factors, social connectedness, employee behaviour, employee personality, and work environment related factors. Similarly, we discovered four factors that impede EA: functional tenure, team identification, bounded discretion, and conscientiousness. Our findings underscore the profound impact of employee ambidexterity on distinct types of performance. Among the sixteen types of performance reported to be enhanced by EA, ten are linked to individual performance, while six are tied to organisational performance. Notably, our analysis revealed that nearly all studies have relied on cross-sectional research methods except for one. However, we advocate for the exploration of longitudinal studies as they hold the promise of offering a more comprehensive understanding of EA. The paper presents valuable insights into how to cultivate ambidextrous capabilities in the workforce for unparalleled success in today's rapidly evolving work environment. Additionally, it identifies several intriguing avenues for future research that could further elucidate and bridge existing knowledge gaps. © 2023
- «
- ‹
- 1
- ›
- »