Description:
Localizing a sound source is a fundamental but still challenging issue in many applications, where sound information is gathered by static and local microphone sensors. Therefore, this work proposes a new system by exploiting advances in sensor networks and robotics to more accurately address the problem of sound source localization. By the use of the network infrastructure, acoustic sensors are more efficient to spatially monitor acoustical phenomena. Furthermore, a mobile robot is proposed to carry an extra microphone array in order to collect more acoustic signals when it travels around the environment. Driving the robot is guided by the need to increase the quality of the data gathered by the static acoustic sensors, which leads to better probabilistic fusion of all the information gained, so that an increasingly accurate map of the sound source can be built. The proposed system has been validated in a real-life environment, where the obtained results are highly promising.
Description:
When a Pulsed Eddy Current (PEC) sensor assesses a metallic surface (i.e., a wall of finite thickness), the inverse problem involves quantification of the geometry and material properties of the wall. Once a PEC sensor is calibrated for a particular material, and the material under test happens to be considerably homogeneous, the inverse problem reduces to quantification of geometry alone. The state-of-the-art in the industry produces a quantification of this geometry only in the form of average wall thickness remaining underneath the sensor footprint, and produces a 2.5D map containing wall thickness information. Therefore, this paper contributes by proposing a solution that can jointly estimate the remaining wall thickness as well as lift-off (i.e., offset from the sensor to the surface of healthy material), in order to advance PEC sensing outputs by enabling estimation of wall condition in 3D. Since PEC maps are used as inputs for stress calculation and remaining life prediction of certain infrastructure like critical pipes, 3D profiles may become a richer form of input for such applications than 2.5D maps. Since PEC sensing is commonly used to assess ferromagnetic materials, this paper focuses on similar materials as well. The solution is demonstrated in simulation alone and future work should focus on experimental implementations.
Description:
Eddy-current non-destructive inspections of conductive components are of great interest in several industries including civil infrastructure and the mining industry. In this work, we have used a driver-pickup coil system as the probe to carry out inspection of ferromagnetic plates. The specific geometric configuration of the probe generates weak electric signals that are buried in a noisy environment. In order to detect these weak signals, we have designed and implemented a lock-in amplifier as part of the signal processing technique to increase the signal-to-noise ratio and also improve the sensitivity of the probe. We have used Comsol as a finite element method (FEM) to design the probe and conducted experiments with the probe and the lock-in amplifier. The experimental results, which are in agreement with the FEM results, indicate that the designed probe along with a lock-in amplifier can potentially be used to estimate the thickness of thin plates.