An expert system based on hybrid ICA-ANN technique to estimate macerals contents of Indian coals
- Khandelwal, Manoj, Mahdiyar, Amir, Armaghani, Danial, Singh, Trilok, Fahimifar, Ahmad, Faradonbeh, Roohollah
- Authors: Khandelwal, Manoj , Mahdiyar, Amir , Armaghani, Danial , Singh, Trilok , Fahimifar, Ahmad , Faradonbeh, Roohollah
- Date: 2017
- Type: Text , Journal article
- Relation: Environmental Earth Sciences Vol. 76, no. 11 (2017), p. 1-14
- Full Text: false
- Reviewed:
- Description: Coal, as an initial source of energy, requires a detailed investigation in terms of ultimate analysis, proximate analysis, and its biological constituents (macerals). The rank and calorific value of each type of coal are managed by the mentioned properties. In contrast to ultimate and proximate analyses, determining the macerals in coal requires sophisticated microscopic instrumentation and expertise. This study emphasizes the estimation of the concentration of macerals of Indian coals based on a hybrid imperialism competitive algorithm (ICA)–artificial neural network (ANN). Here, ICA is utilized to adjust the weight and bias of ANNs for enhancing their performance capacity. For comparison purposes, a pre-developed ANN model is also proposed. Checking the performance prediction of the developed models is performed through several performance indices, i.e., coefficient of determination (R2), root mean square error and variance account for. The obtained results revealed higher accuracy of the proposed hybrid ICA-ANN model in estimating macerals contents of Indian coals compared to the pre-developed ANN technique. Results of the developed ANN model based on R2 values of training datasets were obtained as 0.961, 0.955, and 0.961 for predicting vitrinite, liptinite, and inertinite, respectively, whereas these values were achieved as 0.948, 0.947, and 0.957, respectively, for testing datasets. Similarly, R2 values of 0.988, 0.983, and 0.991 for training datasets and 0.989, 0.982, and 0.985 for testing datasets were obtained from developed ICA-ANN model. © 2017, Springer-Verlag Berlin Heidelberg.
Prediction of drillability of rocks with strength properties using a hybrid GA-ANN technique
- Khandelwal, Manoj, Armaghani, Danial
- Authors: Khandelwal, Manoj , Armaghani, Danial
- Date: 2016
- Type: Text , Journal article
- Relation: Geotechnical and Geological Engineering Vol. 34, no. 2 (2016), p. 605-620
- Full Text:
- Reviewed:
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN.
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN. © 2015 Springer International Publishing Switzerland
- Authors: Khandelwal, Manoj , Armaghani, Danial
- Date: 2016
- Type: Text , Journal article
- Relation: Geotechnical and Geological Engineering Vol. 34, no. 2 (2016), p. 605-620
- Full Text:
- Reviewed:
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN.
- Description: The purpose of this paper is to provide a proper, practical and convenient drilling rate index (DRI) prediction model based on rock material properties. In order to obtain this purpose, 47 DRI tests were used. In addition, the relevant strength properties i.e. uniaxial compressive strength and Brazilian tensile strength were also used and selected as input parameters to predict DRI. Examined simple regression analysis showed that the relationships between the DRI and predictors are statistically meaningful but not good enough for DRI estimation in practice. Moreover, multiple regression, artificial neural network (ANN) and hybrid genetic algorithm (GA)-ANN models were constructed to estimate DRI. Several performance indices i.e. coefficient of determination (R2), root mean square error and variance account for were used for evaluation of performance prediction the proposed methods. Based on these results and the use of simple ranking procedure, the best models were chosen. It was found that the hybrid GA-ANN technique can performed better in predicting DRI compared to other developed models. This is because of the fact that the proposed hybrid model can update the biases and weights of the network connection to train by ANN. © 2015 Springer International Publishing Switzerland
- «
- ‹
- 1
- ›
- »