Description:
A probe tack test has been used for the in situ characterization of the surface stickiness of hemispherical drops with an initial radius of 3.5 mm while drying. Surface stickiness of drops of fructose and maltodextrin solutions dried at 63degreesC and 95degreesC was determined. The effect of addition of maltodextrin on fructose solution-was studied with fructose/maltodextrin solid mass ratios of 4: 1, 1: 1, and 1:4. Pure fructose solutions remained completely sticky and failed cohesively even when their moisture approached zero. Shortly after the start of drying, the surface of the maltodextrin drops formed a skin, which rapidly grew in thickness. Subsequently the drop surface became completely nonsticky probably due to transformation of outer layers into a glassy material. Addition of malto,dextrin significantly altered the surface stickiness of drops of fructose solutions, demonstrating its use as an effective drying aid.
Description:
Omega-3 fatty acids and probiotic bacteria were co-encapsulated in a single whey protein isolate (WPI)-gum Arabic (GA) complex coacervate microcapsule. Tuna oil (0) and Lactobacillus casei 431 (P) were used as models of omega-3 and probiotic bacteria, respectively. The co-microcapsules (WPI-P-O-GA) and L. casei containing microcapsules (WPI-P-GA) were converted into powder by using spray and freeze drying. The viability of L. casei was significantly higher in WPI-P-O-GA co-microcapsules than in WPI-P-GA. The oxidative stability of tuna oil was significantly higher in spray dried co-capsules than in freeze dried ones. Crown Copyright (C) 2015 Published by Elsevier Ltd. All rights reserved.
Description:
The extent and nature of denaturation of whey protein isolate (WPI) in convective air drying environments was measured and analysed using single droplet drying. A custom-built, single droplet drying instrument was used for this purpose. Single droplets having 5. ±. 0.1. μl volume (initial droplet diameter 1.5. ±. 0.1. mm) containing 10% (w/v) WPI were dried at air temperatures of 45, 65 and 80. °C for 600. s at constant air velocity of 0.5. m/s. The extent and nature of denaturation of WPI in isothermal heat treatment processes was measured at 65 and 80. °C for 600. s and compared with those obtained from convective air drying. The extent of denaturation of WPI in a high hydrostatic pressure environment (600. MPa for 600. s) was also determined. The results showed that at the end of 600. s of convective drying at 65. °C the denaturation of WPI was 68.3%, while it was only 10.8% during isothermal heat treatment at the same medium temperature. When the medium temperature was maintained at 80. °C, the denaturation loss of WPI was 90.0% and 68.7% during isothermal heat treatment and convective drying, respectively. The bovine serum albumin (BSA) fraction of WPI was found to be more stable in the convective drying conditions than
Description:
Tuna oil rich in omega-3 fatty acids was microencapsulated in whey protein isolate (WPI)–gum arabic (GA) complex coacervates, and subsequently dried using spray and freeze drying to produce solid microcapsules. The oxidative stability, oil microencapsulation efficiency, surface oil and morphology of these solid microcapsules were determined. The complex coacervation process between WPI and GA was optimised in terms of pH, and WPI-to-GA ratio, using zeta potential, turbidity, and morphology of the microcapsules. The optimum pH and WPI-to-GA ratio for complex coacervation was found to be 3.75 and 3 : 1, respectively. The spray dried solid microcapsules had better stability against oxidation, higher oil microencapsulation efficiency and lower surface oil content compared to the freeze dried microcapsules. The surface of the spray dried microcapsules did not show microscopic pores while the surface of the freeze dried microcapsules was more porous. This study suggests that solid microcapsules of omega-3 rich oils can be produced using WPI–GA complex coacervates followed by spray drying and these microcapsules can be quite stable against oxidation. These microcapsules can have many potential applications in the functional food and nutraceuticals industry.
Description:
The denaturation (loss of protein through aggregation and/or change in secondary structure) and physical characteristics such as powder morphology, particle size and size distribution, amorphous/crystalline behavior, and solubility of whey protein isolate (WPI) were investigated in a spray-drying process. The protective efficacy of sugars (lactose and trehalose) and low-molecular-weight surfactant polysorbate-80 (Tween-80) on the secondary structure (-turn, -sheet and -helix) and physical characteristics of spray-dried WPI was quantified. The WPI, WPI+sugar, and WPI+Tween-80 formulations were spray dried maintaining the total solids at 10% (w/w). The inlet and outlet temperatures were maintained at 180 and 80 degrees C, respectively. The results showed that the loss of protein through denaturation and aggregation was not significant (p>0.05). However, a significant (p<0.05) alteration of the secondary structural elements was observed. Due to spray drying of WPI without protectants, the -sheet and -turn were decreased by 4.4 and 14.5%, respectively, and the random coil increased by 20.7%. The -helix of WPI remained unaltered during the spray-drying process. The presence of Tween-80 effectively protected the -helix and -sheet but the -turn remained vulnerable and was decreased. No significant (p>0.05) change in the solubility of WPI was observed due to spray drying. Spray drying of WPI+sugar produced essentially amorphous particles. The dried powder particles were spherical with wrinkled or folded surface.
Description:
The denaturation kinetics of whey protein isolate (WPI), in the presence and absence of lactose and trehalose, was quantified in a convective air-drying environment. Single droplets of WPI, WPI-lactose and WPI-trehalose were dried in conditioned air (2.5% RH, 0.5 m/s air velocity) at two temperatures (65°C and 80°C) for 500 s. The initial solid concentration of these solutions was 10% (w/v) in all the samples. Approximately 68% of WPI was denatured when it was dried in the absence of sugars. Addition of 20% trehalose prevented the irreversible denaturation of WPI at both temperatures. Thirty percent lactose was required to prevent denaturation of WPI at 65°C and the same amount of lactose protected only 70% of WPI from denaturation at 80°C. The secondary structures of WPI were found to be altered by the drying-induced stresses, even in the presence of 20% trehalose and 30% lactose.