Waveform features and failure patterns of hollow cylindrical sandstone specimens under repetitive impact and triaxial confinements
- Wang, Shiming, Liu, Yunsi, Du, Kun, Zhou, Jian, Khandelwal, Manoj
- Authors: Wang, Shiming , Liu, Yunsi , Du, Kun , Zhou, Jian , Khandelwal, Manoj
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 4 (2020), p.
- Full Text:
- Reviewed:
- Description: In underground engineering practice, the surrounding rocks are subjected to a nonuniform stress field with various radial gradients. In this study, a series of conventional triaxial repetitive impact tests using hollow cylindrical sandstone (HOS) specimens were conducted to reveal the impact waveform features and failure properties of rocks under nonuniform stress conditions. The tests were conducted using a modified large diameter split Hopkinson pressure bar testing system. The confining pressure was set as 5, 10 and 12 MPa. The data of specimens under equilibrium stress states were chosen and analyzed, and the results showed that more applied numbers of cyclic impact loads were needed to break rocks with the increase of confining pressure. Three types of cracks, i.e., ring-shaped cracks around the hole in the center of specimens, axial cracks located in the outer cylindrical surface, and lateral cracks fracturing rock fragments into small pieces appeared in HOS specimens. The failure degrees of HOS specimens could be judged by the waveform features of the reflected wave, and the waveform features of reflected wave are similar in the same failure mode, regardless of the impact velocity and the number of impacts, which only affect the failure degree. © 2020, Springer Nature Switzerland AG.
- Description: The work reported here is supported by financial grants from both the National Natural Science Foundation of China (51774326, 41807259, 51604109 51704109).
- Authors: Wang, Shiming , Liu, Yunsi , Du, Kun , Zhou, Jian , Khandelwal, Manoj
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 4 (2020), p.
- Full Text:
- Reviewed:
- Description: In underground engineering practice, the surrounding rocks are subjected to a nonuniform stress field with various radial gradients. In this study, a series of conventional triaxial repetitive impact tests using hollow cylindrical sandstone (HOS) specimens were conducted to reveal the impact waveform features and failure properties of rocks under nonuniform stress conditions. The tests were conducted using a modified large diameter split Hopkinson pressure bar testing system. The confining pressure was set as 5, 10 and 12 MPa. The data of specimens under equilibrium stress states were chosen and analyzed, and the results showed that more applied numbers of cyclic impact loads were needed to break rocks with the increase of confining pressure. Three types of cracks, i.e., ring-shaped cracks around the hole in the center of specimens, axial cracks located in the outer cylindrical surface, and lateral cracks fracturing rock fragments into small pieces appeared in HOS specimens. The failure degrees of HOS specimens could be judged by the waveform features of the reflected wave, and the waveform features of reflected wave are similar in the same failure mode, regardless of the impact velocity and the number of impacts, which only affect the failure degree. © 2020, Springer Nature Switzerland AG.
- Description: The work reported here is supported by financial grants from both the National Natural Science Foundation of China (51774326, 41807259, 51604109 51704109).
Experimental investigations on mechanical performance of rocks under fatigue loads and biaxial confinements
- Du, Kun, Li, Xue-feng, Yang, Cheng-zhi, Zhou, Jian, Chen, Shao-jie, Manoj, Khandelwal
- Authors: Du, Kun , Li, Xue-feng , Yang, Cheng-zhi , Zhou, Jian , Chen, Shao-jie , Manoj, Khandelwal
- Date: 2020
- Type: Text , Journal article
- Relation: Journal of Central South University Vol. 27, no. 10 (2020), p. 2985-2998
- Full Text:
- Reviewed:
- Description: In this research, a series of biaxial compression and biaxial fatigue tests were conducted to investigate the mechanical behaviors of marble and sandstone under biaxial confinements. Experimental results demonstrate that the biaxial compressive strength of rocks under biaxial compression increases firstly, and subsequently decreases with increase of the intermediate principal stress. The fatigue failure characteristics of the rocks in biaxial fatigue tests are functions of the peak value of fatigue loads, the intermediate principal stress and the rock lithology. With the increase of the peak values of fatigue loads, the fatigue lives of rocks decrease. The intermediate principal stress strengthens the resistance ability of rocks to fatigue loads except considering the strength increasing under biaxial confinements. The fatigue lives of rocks increase with the increase of the intermediate principal stress under the same ratio of the fatigue load and their biaxial compressive strength. The acoustic emission (AE) and fragments studies showed that the sandstone has higher ability to resist the fatigue loads compared to the marble, and the marble generated a greater number of smaller fragments after fatigue failure compared to the sandstone. So, it can be inferred that the rock breaking efficiency and rock burst is higher or severer induced by fatigue loading than that induced by monotonous quasi-static loading, especially for hard rocks. © 2020, Central South University Press and Springer-Verlag GmbH Germany, part of Springer Nature.
- Authors: Du, Kun , Li, Xue-feng , Yang, Cheng-zhi , Zhou, Jian , Chen, Shao-jie , Manoj, Khandelwal
- Date: 2020
- Type: Text , Journal article
- Relation: Journal of Central South University Vol. 27, no. 10 (2020), p. 2985-2998
- Full Text:
- Reviewed:
- Description: In this research, a series of biaxial compression and biaxial fatigue tests were conducted to investigate the mechanical behaviors of marble and sandstone under biaxial confinements. Experimental results demonstrate that the biaxial compressive strength of rocks under biaxial compression increases firstly, and subsequently decreases with increase of the intermediate principal stress. The fatigue failure characteristics of the rocks in biaxial fatigue tests are functions of the peak value of fatigue loads, the intermediate principal stress and the rock lithology. With the increase of the peak values of fatigue loads, the fatigue lives of rocks decrease. The intermediate principal stress strengthens the resistance ability of rocks to fatigue loads except considering the strength increasing under biaxial confinements. The fatigue lives of rocks increase with the increase of the intermediate principal stress under the same ratio of the fatigue load and their biaxial compressive strength. The acoustic emission (AE) and fragments studies showed that the sandstone has higher ability to resist the fatigue loads compared to the marble, and the marble generated a greater number of smaller fragments after fatigue failure compared to the sandstone. So, it can be inferred that the rock breaking efficiency and rock burst is higher or severer induced by fatigue loading than that induced by monotonous quasi-static loading, especially for hard rocks. © 2020, Central South University Press and Springer-Verlag GmbH Germany, part of Springer Nature.
Low amplitude fatigue performance of sandstone, marble, and granite under high static stress
- Du, Kun, Su, Rui, Zhou, Jian, Wang, Shaofeng, Khandelwal, Manoj
- Authors: Du, Kun , Su, Rui , Zhou, Jian , Wang, Shaofeng , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 7, no. 3 (2021), p.
- Full Text:
- Reviewed:
- Description: Abstract: Fatigue tests under high static pre-stress loads can provide meaningful results to better understand the time-dependent failure characteristics of rock and rock-like materials. However, fatigue tests under high static pre-stress loads are rarely reported in previous literature. In this study, the rock specimens were loaded with a high static pre-stress representing 70% and 80% of the uniaxial compressive strength (UCS), and cyclic fatigue loads with a low amplitude (i.e., 5%, 7.5% and 10% of the UCS) were applied. The results demonstrate that the fatigue life decreased as the static pre-stress level or amplitude of fatigue loads increased for different rock types. The high static pre-stress affected the fatigue life greatly when the static pre-stress was larger than the damage stress of rocks in uniaxial compression tests. The accumulative fatigue damage exhibited three stages during the fatigue failure process, i.e., crack initiation, uniform velocity, and acceleration, and the fatigue modulus showed an “S-type” change trend. The lateral and volumetric strains had a much higher sensitivity to the cyclic loading and could be used to predict fatigue failure characteristics. It was observed that volumetric strain εv = 0 is a threshold for microcracks coalescence and is an important value for estimating the fatigue life. Article highlights: Fatigue mechanical performance of high static pre-stressed rocks were evaluated.The results demonstrate that the fatigue life decreased as the static pre-stress level increased and the static pre-stress affected the fatigue life more than the amplitude of fatigue loads.The volumetric strain of zero before fatigue loading is a threshold for fatigue failure of rocks under high static stress. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Manoj Khandelwal” is provided in this record**
- Authors: Du, Kun , Su, Rui , Zhou, Jian , Wang, Shaofeng , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 7, no. 3 (2021), p.
- Full Text:
- Reviewed:
- Description: Abstract: Fatigue tests under high static pre-stress loads can provide meaningful results to better understand the time-dependent failure characteristics of rock and rock-like materials. However, fatigue tests under high static pre-stress loads are rarely reported in previous literature. In this study, the rock specimens were loaded with a high static pre-stress representing 70% and 80% of the uniaxial compressive strength (UCS), and cyclic fatigue loads with a low amplitude (i.e., 5%, 7.5% and 10% of the UCS) were applied. The results demonstrate that the fatigue life decreased as the static pre-stress level or amplitude of fatigue loads increased for different rock types. The high static pre-stress affected the fatigue life greatly when the static pre-stress was larger than the damage stress of rocks in uniaxial compression tests. The accumulative fatigue damage exhibited three stages during the fatigue failure process, i.e., crack initiation, uniform velocity, and acceleration, and the fatigue modulus showed an “S-type” change trend. The lateral and volumetric strains had a much higher sensitivity to the cyclic loading and could be used to predict fatigue failure characteristics. It was observed that volumetric strain εv = 0 is a threshold for microcracks coalescence and is an important value for estimating the fatigue life. Article highlights: Fatigue mechanical performance of high static pre-stressed rocks were evaluated.The results demonstrate that the fatigue life decreased as the static pre-stress level increased and the static pre-stress affected the fatigue life more than the amplitude of fatigue loads.The volumetric strain of zero before fatigue loading is a threshold for fatigue failure of rocks under high static stress. © 2021, The Author(s), under exclusive licence to Springer Nature Switzerland AG. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Manoj Khandelwal” is provided in this record**
Mineral composition and grain size effects on the fracture and Acoustic Emission (AE) characteristics of rocks under compressive and tensile stress
- Du, Kun, Sun, Yu, Zhou, Jian, Khandelwal, Manoj, Gong, Fengqiang
- Authors: Du, Kun , Sun, Yu , Zhou, Jian , Khandelwal, Manoj , Gong, Fengqiang
- Date: 2022
- Type: Text , Journal article
- Relation: Rock Mechanics and Rock Engineering Vol. 55, no. 10 (2022), p. 6445-6474
- Full Text:
- Reviewed:
- Description: The influence of rock mineral composition and mineral grain size on basic rock strength performance and AE characteristics have been studied, 13 different rocks microstructures are analyzed in an optical microscope thin section using petrographic image analysis, making it possible to determine the mineral composition and mineral texture characteristics of rocks. Then, the basic strength parameters of rock and AE signals generated during fracture propagation were obtained by UCT (uniaxial compression test) and BIT (Brazilian intension test). Finally, the relationship between basic strength parameters and AE characteristics of rock with mineral composition and grain size was analyzed. The results showed that different mineral constituents have significant effects on rock strength. The positive influence of plagioclase content on igneous strength was obtained. Sedimentary rocks strength increases initially and then decreases with the increase of plagioclase content. Besides, with the increase in quartz and K-feldspar content, the strength of the rock was weakened obviously. It is also found that the greater the dimensional deviation of mineral grain, the greater the strength of the rock. The strength of igneous rocks was inversely proportional to the mineral grain size, but there is no correlation between the sedimentary rocks strength and the mineral grain size. Furthermore, the tension–shear crack propagation of rock can effectively distinguish by judging that the data set of the AF–RA density graph was nearby the AF axis or RA axis and the peak frequency data sets of below 100 kHz or more than. Alterations in the rock nature are the main key reasons for the differences between AE hit rate, AE count rate, AE energy, and cumulative energy. The plagioclase content and grain size play a decisive role in AE signal characteristics and failure mode. © 2022, The Author(s).
- Authors: Du, Kun , Sun, Yu , Zhou, Jian , Khandelwal, Manoj , Gong, Fengqiang
- Date: 2022
- Type: Text , Journal article
- Relation: Rock Mechanics and Rock Engineering Vol. 55, no. 10 (2022), p. 6445-6474
- Full Text:
- Reviewed:
- Description: The influence of rock mineral composition and mineral grain size on basic rock strength performance and AE characteristics have been studied, 13 different rocks microstructures are analyzed in an optical microscope thin section using petrographic image analysis, making it possible to determine the mineral composition and mineral texture characteristics of rocks. Then, the basic strength parameters of rock and AE signals generated during fracture propagation were obtained by UCT (uniaxial compression test) and BIT (Brazilian intension test). Finally, the relationship between basic strength parameters and AE characteristics of rock with mineral composition and grain size was analyzed. The results showed that different mineral constituents have significant effects on rock strength. The positive influence of plagioclase content on igneous strength was obtained. Sedimentary rocks strength increases initially and then decreases with the increase of plagioclase content. Besides, with the increase in quartz and K-feldspar content, the strength of the rock was weakened obviously. It is also found that the greater the dimensional deviation of mineral grain, the greater the strength of the rock. The strength of igneous rocks was inversely proportional to the mineral grain size, but there is no correlation between the sedimentary rocks strength and the mineral grain size. Furthermore, the tension–shear crack propagation of rock can effectively distinguish by judging that the data set of the AF–RA density graph was nearby the AF axis or RA axis and the peak frequency data sets of below 100 kHz or more than. Alterations in the rock nature are the main key reasons for the differences between AE hit rate, AE count rate, AE energy, and cumulative energy. The plagioclase content and grain size play a decisive role in AE signal characteristics and failure mode. © 2022, The Author(s).
- Du, Kun, Liu, Minghui, Zhou, Jian, Khandelwal, Manoj
- Authors: Du, Kun , Liu, Minghui , Zhou, Jian , Khandelwal, Manoj
- Date: 2022
- Type: Text , Journal article
- Relation: Mining, Metallurgy and Exploration Vol. 39, no. 2 (2022), p. 433-452
- Full Text: false
- Reviewed:
- Description: The waste rock and tailings backfill into the mined-out areas are the most effective method for solving the environmental pollution and surface disasters for nonferrous metals mines. In practice, the success and availability of backfill operations are dependent on the slurry fluidity and the strength properties of cement backfill. The transport of the slurry through the pipeline to the designated backfilling area relies on its eximious flow properties, while the appropriate strength of the filling body ensures the safe operation of the stope. In this paper, the effects of cement and aggregate types on the slurry fluidity and strength characteristics of cemented backfill are studied in detail, which are often ignored in other pieces of literature. Diffusivity is used as an indicator to evaluate the slurry fluidity. Various slurries whose concentrations ranging from 70%, 73%, 75%, 78%, and 80% are made with different aggregate ratios and cement-sand ratios are tested. It has been shown that slurry fluidity is inversely related to its concentration, but 78% is the “stopping point” for the deterioration of fluidity. The addition of rod-milled sand improves or worsens the cemented backfill (CB) strength depending on the amount of rob-milled sand. The uniaxial compression experiment results on 216 CB specimens produced by different combinations of influencing variables showed that CB specimens made from cement with superior mechanical properties have a higher uniaxial compressive strength (σucs). It has been also found that the effect of aggregate ratio on the CB strength is not singular, but works in conjunction with the curing time and the cement-sand ratio. The longer the curing time and the higher the cement content, the higher the CB’s σucs. To avoid the time-consuming and costly problem of obtaining the strength of the CB from indoor experiments, an SVR model capable of predicting the uniaxial compression strength of CB specimens is proposed, which is optimized by genetic algorithm (GA) and particle swarm optimization (PSO) algorithm. The results of the three performance indexes (MAPE, MSE, and R2) show the superior performance of the GA-SVR and PSO-SVR models and the agreement of the predicted results with the experimental results, which indicate that these two models can accurately predict the σucs of CB. © 2022, Society for Mining, Metallurgy & Exploration Inc.
- Zhou, Jian, Dai, Yong, Du, Kun, Khandelwal, Manoj, Li, Chuanqi, Qiu, Yingui
- Authors: Zhou, Jian , Dai, Yong , Du, Kun , Khandelwal, Manoj , Li, Chuanqi , Qiu, Yingui
- Date: 2022
- Type: Text , Journal article
- Relation: Transportation Geotechnics Vol. 36, no. (2022), p.
- Full Text: false
- Reviewed:
- Description: Since conical pick cutting is a complex process of multi-factor coupling effects, theoretical model construction for cutting force prediction is a quite difficult task. In this paper, various novel intelligent models based on chaos-optimized slime mould algorithm (COSMA) and random forest (RF) are proposed for this task. In the proposed COSMA-RF methods, the chaos algorithms with the ergodicity and randomness are introduced to chaotically determine the initial position to form a COSMA, and the SMA and COSMA are used to tune the hyperparameters of RF and mean square error are assigned as a fitness function. Consequently, 205 data samples having seven variables (tensile strength of the rock
Experimental investigation and theoretical analysis of indentations on cuboid hard rock using a conical pick under uniaxial lateral stress
- Wang, Shaofeng, Sun, Licheng, Li, Xibing, Zhou, Jian, Du, Kun, Wang, Shanyong, Khandelwal, Manoj
- Authors: Wang, Shaofeng , Sun, Licheng , Li, Xibing , Zhou, Jian , Du, Kun , Wang, Shanyong , Khandelwal, Manoj
- Date: 2022
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 8, no. 1 (2022), p.
- Full Text:
- Reviewed:
- Description: Abstract: Stress conditions are critical in deep hard rock mining and significantly influence hard rock cuttability. The peak cutting force (PCF), cutting work (CW), and specific energy (SE) can reflect rock cuttability and determine the feasibility and saving of mechanized mining to some extent. In this paper, the influence of uniaxial lateral stress on rock cuttability was investigated by an indentation experiment on cuboid rock using a conical pick, and a theoretical model was proposed to analyze the PCF and associated factors. The PCF, CW, and SE were used as indices to measure hard rock cuttability. The regression analyses show that rock cuttability presents as decreasing followed by increasing as uniaxial lateral stresses increases. The theoretical model was established by simplifying rock fragments into three-dimensional ellipse cones, and a formula was derived based on the elastic fracture mechanics theory. The error between the calculated and experimental values is 3.8%, which confirms the accuracy of the prediction formula. Finally, rock fragmentation by using conical picks was successfully applied on the field mining stope by inducing high geostresses to promote adjustments in stress and improve ore-rock cuttability. Highlights: (1)The influences of uniaxial lateral stress on rock cuttability have been investigated.(2)The peak cutting force, cutting work and specific energy can reflect the rock cuttability.(3)A new theoretical model has been proposed to analyze the peak cutting force.(4)The rock fragmentation using conical picks was successfully applied in deep hard rock mining. © 2022, The Author(s), under exclusive licence to Springer Nature Switzerland AG.
- Authors: Wang, Shaofeng , Sun, Licheng , Li, Xibing , Zhou, Jian , Du, Kun , Wang, Shanyong , Khandelwal, Manoj
- Date: 2022
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 8, no. 1 (2022), p.
- Full Text:
- Reviewed:
- Description: Abstract: Stress conditions are critical in deep hard rock mining and significantly influence hard rock cuttability. The peak cutting force (PCF), cutting work (CW), and specific energy (SE) can reflect rock cuttability and determine the feasibility and saving of mechanized mining to some extent. In this paper, the influence of uniaxial lateral stress on rock cuttability was investigated by an indentation experiment on cuboid rock using a conical pick, and a theoretical model was proposed to analyze the PCF and associated factors. The PCF, CW, and SE were used as indices to measure hard rock cuttability. The regression analyses show that rock cuttability presents as decreasing followed by increasing as uniaxial lateral stresses increases. The theoretical model was established by simplifying rock fragments into three-dimensional ellipse cones, and a formula was derived based on the elastic fracture mechanics theory. The error between the calculated and experimental values is 3.8%, which confirms the accuracy of the prediction formula. Finally, rock fragmentation by using conical picks was successfully applied on the field mining stope by inducing high geostresses to promote adjustments in stress and improve ore-rock cuttability. Highlights: (1)The influences of uniaxial lateral stress on rock cuttability have been investigated.(2)The peak cutting force, cutting work and specific energy can reflect the rock cuttability.(3)A new theoretical model has been proposed to analyze the peak cutting force.(4)The rock fragmentation using conical picks was successfully applied in deep hard rock mining. © 2022, The Author(s), under exclusive licence to Springer Nature Switzerland AG.
Utilization methods and practice of abandoned mines and related rock mechanics under the ecological and double carbon strategy in china—a comprehensive review
- Du, Kun, Xie, Junjie, Khandelwal, Manoj, Zhou, Jian
- Authors: Du, Kun , Xie, Junjie , Khandelwal, Manoj , Zhou, Jian
- Date: 2022
- Type: Text , Journal article , Review
- Relation: Minerals Vol. 12, no. 9 (2022), p.
- Full Text:
- Reviewed:
- Description: Governance of abandoned mines has become a pressing issue for China. The utilization of abandoned mines is a technology that can solve the problem of governance and recreate the value of mines, which is in line with the current strategic goals of ecological protection and double carbon in China. In this paper, the various utilization models and the advances in rock mechanics of abandoned mines across the globe are summarized and reviewed. The utilization models of abandoned mines can be categorized into four aspects: Energy storage, Waste treatment, Ecological restoration, and carbon dioxide (CO2) sequestration. There are a number of applications and uses of abandoned mines, such as pumped storage, compressed air storage, salt cavern gas/oil storage construction, carbon dioxide storage and utilization, radioactive waste disposal and treatment, and tourism development. Various progress practices of abandoned mines are discussed in detail with emphasis on the national conditions of China. The basic rock mechanics problems and advances involved in the construction of the facilities related to the utilization of abandoned mines are discussed and evaluated. The establishment of relevant research and experimental platforms will contribute to the sustainable development of China’s mining industry and the improvement of clean technologies. © 2022 by the authors.
- Authors: Du, Kun , Xie, Junjie , Khandelwal, Manoj , Zhou, Jian
- Date: 2022
- Type: Text , Journal article , Review
- Relation: Minerals Vol. 12, no. 9 (2022), p.
- Full Text:
- Reviewed:
- Description: Governance of abandoned mines has become a pressing issue for China. The utilization of abandoned mines is a technology that can solve the problem of governance and recreate the value of mines, which is in line with the current strategic goals of ecological protection and double carbon in China. In this paper, the various utilization models and the advances in rock mechanics of abandoned mines across the globe are summarized and reviewed. The utilization models of abandoned mines can be categorized into four aspects: Energy storage, Waste treatment, Ecological restoration, and carbon dioxide (CO2) sequestration. There are a number of applications and uses of abandoned mines, such as pumped storage, compressed air storage, salt cavern gas/oil storage construction, carbon dioxide storage and utilization, radioactive waste disposal and treatment, and tourism development. Various progress practices of abandoned mines are discussed in detail with emphasis on the national conditions of China. The basic rock mechanics problems and advances involved in the construction of the facilities related to the utilization of abandoned mines are discussed and evaluated. The establishment of relevant research and experimental platforms will contribute to the sustainable development of China’s mining industry and the improvement of clean technologies. © 2022 by the authors.
Comparative evaluation of empirical approaches and artificial intelligence techniques for predicting uniaxial compressive strength of rock
- Li, Chuanqi, Zhou, Jian, Dias, Daniel, Du, Kun, Khandelwal, Manoj
- Authors: Li, Chuanqi , Zhou, Jian , Dias, Daniel , Du, Kun , Khandelwal, Manoj
- Date: 2023
- Type: Text , Journal article
- Relation: Geosciences (Switzerland) Vol. 13, no. 10 (2023), p.
- Full Text:
- Reviewed:
- Description: The uniaxial compressive strength (UCS) of rocks is one of the key parameters for evaluating the safety and stability of civil and mining structures. In this study, 386 rock samples containing four properties named the load strength (PLS), the porosity (Pn), the P-wave velocity (Vp), and the Schmidt hardness rebound number (SHR) are utilized to predict the UCS using several typical empirical equations (EA) and artificial intelligence (AI) methods, i.e., 16 single regression (SR) equations, 2 multiple regression (MR) equations, and the random forest (RF) models optimized by grey wolf optimization (GWO), moth flame optimization (MFO), lion swarm optimization (LSO), and sparrow search algorithm (SSA). The root mean square error (RMSE), determination coefficient (R2), Willmott’s index (WI), and variance accounted for (VAF) are used to evaluate the predictive performance of all developed models. The evaluation results show that the overall performance of AI models is superior to empirical approaches, especially the LSO-RF model. In addition, the most important input variable is the Pn for predicting the UCS. Therefore, AI techniques are considered as more efficient and accurate approaches to replace the empirical equations for predicting the UCS of these collected rock samples, which provides a reliable and effective idea to predict the rock UCS in the filed site. © 2023 by the authors.
- Authors: Li, Chuanqi , Zhou, Jian , Dias, Daniel , Du, Kun , Khandelwal, Manoj
- Date: 2023
- Type: Text , Journal article
- Relation: Geosciences (Switzerland) Vol. 13, no. 10 (2023), p.
- Full Text:
- Reviewed:
- Description: The uniaxial compressive strength (UCS) of rocks is one of the key parameters for evaluating the safety and stability of civil and mining structures. In this study, 386 rock samples containing four properties named the load strength (PLS), the porosity (Pn), the P-wave velocity (Vp), and the Schmidt hardness rebound number (SHR) are utilized to predict the UCS using several typical empirical equations (EA) and artificial intelligence (AI) methods, i.e., 16 single regression (SR) equations, 2 multiple regression (MR) equations, and the random forest (RF) models optimized by grey wolf optimization (GWO), moth flame optimization (MFO), lion swarm optimization (LSO), and sparrow search algorithm (SSA). The root mean square error (RMSE), determination coefficient (R2), Willmott’s index (WI), and variance accounted for (VAF) are used to evaluate the predictive performance of all developed models. The evaluation results show that the overall performance of AI models is superior to empirical approaches, especially the LSO-RF model. In addition, the most important input variable is the Pn for predicting the UCS. Therefore, AI techniques are considered as more efficient and accurate approaches to replace the empirical equations for predicting the UCS of these collected rock samples, which provides a reliable and effective idea to predict the rock UCS in the filed site. © 2023 by the authors.
- Zhang, Yulin, He, Haini, Khandelwal, Manoj, Du, Kun, Zhou, Jian
- Authors: Zhang, Yulin , He, Haini , Khandelwal, Manoj , Du, Kun , Zhou, Jian
- Date: 2023
- Type: Text , Journal article , Review
- Relation: Environmental Science and Pollution Research Vol. 30, no. 47 (2023), p. 103534-103555
- Full Text: false
- Reviewed:
- Description: Blasting constitutes an essential component of the mining and construction industries. However, the associated nuisances, particularly blast vibration, have emerged as significant concerns that pose threats to operational stability and the safety of the surrounding areas. Given the increasing emphasis on sustainability, ecological responsibility, safety, and geo-environmental practices, the impact of blast vibration has garnered heightened attention and scrutiny. Nevertheless, the field still lacks comprehensive phase analysis studies. Therefore, it is imperative to elucidate the research progress on blast vibration and discern its current frontiers of investigation. To address this need, this study employs bibliometric methods and the CiteSpace 6.1.R2 software to analyze 3093 papers from the Web of Science database. Through this comprehensive analysis, the study aims to chronicle the developmental trajectory, assess the present research status, and identify future trends in the field of blast vibration. The findings of this study reveal that research on “blasting vibration” is advancing rapidly, with the number of citations exhibiting a J-shaped growth curve over time. China emerges as the leading contributor to this research, followed by India, and the foremost institution in this field is Central South University in China. Cluster analysis identifies the effects of ground vibration, numerical simulation, blast load, blasting vibration and rockburst hazard as the most prominent research areas presently. The primary research directions in this domain revolve around the rock fragmentation, compressive strength, particle swarm optimization, and ann. The emergence of these keywords underscores a dynamic shift towards a more holistic and multidisciplinary approach in the field of blasting-induced ground vibration. Furthermore, this study provides a concise overview of blast vibration, discusses prediction techniques, and proposes measures for its control. Additionally, the discussion delves into the social significance of intelligent blasting systems within the context of artificial intelligence, aiming to address the hazards associated with blast-induced ground vibrations. © 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
- «
- ‹
- 1
- ›
- »