Analysis of power system communication architectures between substations using IEC 61850
- Authors: Das, Narottam , Islam, Syed
- Date: 2014
- Type: Text , Conference proceedings , Conference paper
- Relation: 5th Brunei International Conference on Engineering and Technology, BICET 2014; Bandar Seri Begawan, Brunei Darussalam; 1st-3rd November 2014 Vol. 2014, p. 1-6
- Full Text: false
- Reviewed:
- Description: Interoperability among multi-vendor substations automation devices, is now achievable due to the introduction of IEC 61850 standard, which allows power system communication between substations. This standard does not mandatorily demands for redundancy in any type of substation neither does it mentions a specific type of substation design application. Ethernet based communication protocols for substation automation systems (SASs) are specified in IEC 61850 standard. The standards include Ethernet based process-level connections between switchyards and control rooms. However, their in-service performance is not well known. Moreover, IEC 61850 demands for a communication topology which is zero point failure proof and provides worthy data transmission rates, without pursuing any delays. In order to achieve these norms, Ethernet architectures must be modelled and analysed in detail. The performance of individual architecture must be analysed in terms of their reliability, availability and efficiency of data transfer. This paper presents the reliability and availability using the reliability block diagrams, along with OPNET network real-time simulations, which shows the efficiency of individual architecture along with comparing and synthesizing the most effective communication topology for the SASs.
High voltage substation automation and protection system based on IEC 61850
- Authors: Kumar, Shantanu , Das, Narottam , Islam, Syed
- Date: 2018
- Type: Text , Conference proceedings
- Relation: 2018 Australasian Universities Power Engineering Conference (AUPEC);Auckland, New Zealand; 27-30 Nov. 2018
- Full Text: false
- Reviewed:
- Description: Digital Communication is the future of High Voltage (HV) substation automation, protection and control. It not only offer ease of diagnostics but acts fast to isolate healthy feeders from faulty ones. The effect of this digital protection technology is being appreciated by many utilities and industries for the benefit it offers to them and looks to be the future. Some of the utilities are replacing their secondary copper wires with Fibre Optics (FO) and Ethernet wires as they want load the cable trays less and identify the FO better than the secondary copper wires. Conventional relays are being replaced with Intelligent Electronic Devices (IEDs) during asset management replacement program. Switchyard equipment such as instrument transformers filled with oil and SF6 gas are being replaced with Non-Conventional Instrument Transformer (NCITs). Ushering new devices into the network are not without challenges. These devices and peripherals cannot be put into use by the end user without proper assessment and needs to be validated with number of tests for its performances. To get end users acceptance, laboratory and field tests are carried out to study the propagation delays and performance issues as applicable to digital automation and protection scheme. This paper discusses an early detection of the loss of data packets in a star connected Ethernet Substation Automation Systems (SAS). Understanding a real model in a lab environment is an important step towards performance evaluation and identification of issues. With the involvement of multiple manufacturer in the digital substation, it is good to set a trial of the interoperability of equipment involving their products which could address critical protection issues. This paper focuses on a star connected architecture using an Optimized Network Engineering Tool (OPNET) lab-based software simulating the latency and delays of a digital protection scheme in a 132/22-kV zone substation.
Investigation on architectures for power system communications between substations using IEC 61850
- Authors: Das, Narottam , Modi, Hitesh , Islam, Syed
- Date: 2014
- Type: Text , Conference proceedings , Conference paper
- Relation: 24th Australasian Universities Power Engineering Conference, AUPEC 2014; Perth, Australia; 28th September-1st October 2014 p. 1-6
- Full Text: false
- Reviewed:
- Description: This paper investigates the communication network architectures for power systems between substations using IEC 61850. Optimized Network Engineering Tools (OPNET) is used for the simulations. The simulation results show the performance of individual architectures power system communications (PSC) for substation automation systems (SASs). Nowadays, interoperability among multi-vendor substations automation devices is achievable using IEC 61850 standard which allows the PSC between substations. Ethernet based communication protocols for the SASs are specified in IEC 61850 standard. These standards include Ethernet based process-level connections between switchyards and control rooms. However, their in-service performance is not well known yet. The IEC 61850 demands for a communication topology which is zero point failure proof and provides worthy data transmission rates, without pursuing any delays. In order to achieve these norms, Ethernet architectures are modeled and analyzed in detail. The performance of individual architecture also analyzed in terms of their reliability, availability and efficiency of data transfer. The hybrid, star-ring and redundant ring network architectures are the most efficient in terms of data transmission, delay times, reliability and availability between the SASs for data transmission.
Performance analysis of substation automation systems architecture based on IEC 61850
- Authors: Kumar, Shantanu , Das, Narottam , Islam, Syed
- Date: 2014
- Type: Text , Conference proceedings , Conference paper
- Relation: 24th Australasian Universities Power Engineering Conference, AUPEC 2014; Perth, Australia; 28th September-1st October 2014 p. 1-6
- Full Text: false
- Reviewed:
- Description: Digital Communications amongst multi-vendor intelligent electronic devices (IED's) is an important feature of a substation automation system (SAS). Measuring the propagation delays and assessing the interoperability performance of IED's in an Ethernet architecture play a critical role in the protection of important substation assets. Early detection of the loss of data packets in a star connected Ethernet architecture is an important step towards identification of delay in message transfer issue. This identification of the problem could lead to reliable operation of protection system and better understanding of the issues of interoperability which may improve the protection system from safety and availability point of view. This paper focuses on a star connected architecture using Optimized Network Engineering Tool (OPNET) software for a 132/22kV zone substation. It shares a practical case for measuring delay time in exchanging Generic Object Oriented Substation Event (GOOSE) messages amongst the IED's.
Performance evaluation of data transmission in a single and double bus network within the utility substation based on IEC 61850
- Authors: Kumar, Shantanu , Das, Narottam , Muigai, John , Islam, Syed
- Date: 2014
- Type: Text , Conference proceedings , Conference paper
- Relation: 2014 IEEE Power and Energy Society General Meeting; National Harbor, United States; 27th-31st July 2014 Vol. 2014, p. 1-5
- Full Text: false
- Reviewed:
- Description: Communication between intelligent electronic devices (IED's) is an important feature of a utility substation automation system based on IEC 61850. Time critical information related to fault and overcurrent, under frequency messages for substation automation system (SAS) and the use of IED's from multiple vendors, has opened up issues related to a reliable protection system within the high voltage substation. Early detection of the delay in data transmission over a Generic Object Oriented Substation Event (GOOSE) network is an important step towards identification of problems associated with the dynamic protection system. It is observed that non critical messages adds up the queuing time and delays in the delivery of the messages which could be an issue in the reliable operation of a protection system. In this paper an Optimized Network Engineering Tool (OPNET) model is created, tested and analysed for a single and double bus configuration in detail for the delay encountered in data transfer within a typical zone substation. In order to understand the delay in transmission of packets, a 132/22kV zone substation model is analysed and results are discussed based on GOOSE communication in an IEC 61850 environment. Further, the delay in communication is compared and analysed between a single and double bus system of a 132/22kV substation to determine the best alternative technique available from protection point of view in a SAS network.
Performance monitoring of a PMU in a microgrid environment based on IEC 61850-90-5
- Authors: Kumar, Shantanu , Das, Narottam , Islam, Syed
- Date: 2016
- Type: Text , Conference proceedings , Conference paper
- Relation: 2016 Australasian Universities Power Engineering Conference, AUPEC 2016; Brisbane, Australia; 25th-28th September 2016 p. 1-5
- Full Text:
- Reviewed:
- Description: Reliable protection, communication and control are the key features of a digital protection scheme in a utility substation. Microgrid is an alternative solution of installing long Transmission & Distribution lines could be cost prohibitive. There are number of Intelligent Electronic Devices (IEDs) which could find applications in controlling and monitoring of power network in a Microgrid set up and one such device is Phasor Measurement Unit (PMU). It is a microprocessor based intelligent device which gathers high-resolution data, checks the power quality and records disturbances. However, few issues that remains to be addressed such as, interoperability in a multi-vendor equipment and coordination between individual control systems in an integrated scheme. In this paper, an Operational Network Technology (OPNET) software model of a PMU has been designed and tested for its performance in a Microgrid environment based on IEC 61850-90-5 standard.
Verification of latency and delays related to a digital topology based on IEC 61850
- Authors: Kumar, Shantanu , Das, Narottam , Islam, Syed , Abu-Siada, Ahmed
- Date: 2019
- Type: Text , Conference proceedings , Conference paper
- Relation: 2019 29th Australasian Universities Power Engineering Conference (AUPEC2019); Momi Bay, Fiji; 26th-29th November 2019
- Full Text: false
- Reviewed:
- Description: Digital Communication systems have matured to a point of acceptance in the last decade enormously based on IEC 61850 guidelines from Substation Automation System (SAS) perspective. However, these networks have issues related to latency, data clogging delays, errors etc. in the digital protection system. Measuring propagation delays and assessing the performance of IED's and other peripherals in an Ethernet topology play a critical role in relay coordination setting. This paper discusses issues associated with a digital network and addresses the problems that could mitigate spurious tripping or compromise the protection of the assets in the feeders leading to a reliable operation of the protection system. The discussion in this paper is carried out based on a case study related to a digital star topology using Optimized Network Engineering Tool (OPNET) software of a 132/22-kV zone substation. We report the practical case of measuring delay time during frame exchanges of Generic Object Oriented Substation Event (GOOSE) and Sampled Value (SV) messages amongst the IED' and peripherals.