Water uptake and its impact on the texture of lentils (Lens culinaris)
- Authors: Joshi, Matina , Adhikari, Benu , Panozzo, Joe , Aldred, Peter
- Date: 2010
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 100, no. 1 (2010), p. 61-69
- Full Text: false
- Reviewed:
- Description: Water uptake behavior of three cultivars of lentils (Boomer, French-green and Nugget) was studied at three different hydration temperature regimes (room temperature, 50 °C and 85 °C). Boomer had the highest amount of water uptake capacity (74.60 g water/100 g of seeds) at room temperature (20 °C) which can be linked with its pore properties. French-green lentils imbibed the largest amount of water at elevated soaking temperatures (50 °C and 85 °C) and can be attributed to its higher seed surface area to volume ratio, high protein content and relatively thinner seed coat. Water uptake at elevated temperatures (50 °C and 85 °C) were predicted by a two parameter Mitscherlich model (R2 > 0.99,
- Description: 2003008231
Barley (1 -> 3; 1 -> 4)-beta-glucan and arabinoxylan content are related to kernel hardness and water uptake
- Authors: Gamlath, Jayantha , Aldred, Peter , Panozzo, Joe
- Date: 2008
- Type: Text , Journal article
- Relation: Journal of Cereal Science Vol. 47, no. 2 (Mar 2008), p. 365-371
- Full Text: false
- Reviewed:
- Description: Harder kernels in barley are thought to be a factor affecting the modification of the endosperm during malting by restricting water and enzyme movement within the endosperm. The objective of this study was to investigate the relationship between kernel hardness, water uptake and the endosperm composition in barley. A range of barley samples from 2003 and 2004 crops were analyzed for kernel hardness by the Single Kernel Characterization System, water uptake during steeping and chemical composition of the endosperm including (1→3; 1→4)-
- Description: C1
Physicochemical and functional properties of lentil protein isolates prepared by different drying methods
- Authors: Joshi, Matina , Adhikari, Benu , Aldred, Peter , Panozzo, Joe , Kasapis, Stefan
- Date: 2011
- Type: Text , Journal article
- Relation: Food Chemistry Vol. 129, no. 4 (2011), p. 1513-1522
- Full Text: false
- Reviewed:
- Description: Lentil protein isolate (LPI) extract was converted into powder by freeze drying, spray drying and vacuum drying. Differences in particle size distribution, protein subunit composition and colour and surface morphology were observed amongst the three drying methods. Spray and freeze-dried LPI powders exhibited higher solubility (81% and 78%, respectively) compared to vacuum dried powders (50%). The spray dried powders showed a low water absorption capacity (0.43 ± 0.02 g/g) compared to freeze (0.48 ± 0.02 g/g) and vacuum-dried (0.47 ± 0.01 g/g) LPI powders. Spray and freeze-dried powders displayed better gelation ability and higher gel strength, compared to vacuum-dried powder. Both spray and freeze-dried gels showed typical viscoelastic gel characteristics, with G′ dominating over G″ and very low loss tangent. The holding time required for gelation of vacuum dried powder at 90 °C was significantly longer, compared to spray and freeze dried powders. Hence, drying methods used for preparation of lentil protein isolate powders can affect physicochemical and associated functional properties. © 2011 Elsevier Ltd. All rights reserved.
Physicochemical and functional characteristics of lentil starch
- Authors: Joshi, Matina , Aldred, Peter , McKnight, Stafford , Panozzo, Joe , Kasapis, Stefan , Adhikari, Raju , Adhikari, Benu
- Date: 2013
- Type: Text , Journal article
- Relation: Carbohydrate Polymers Vol. 92, no. 2 (2013), p. 1484-1496
- Full Text: false
- Reviewed:
- Description: The physicochemical properties of lentil starch were measured and linked up with its functional properties and compared with those of corn and potato starches. The amylose content of lentil starch was the highest among these starches. The crystallinity and gelatinization enthalpy of lentil starch were the lowest among these starches. The high amylose: amylopectin ratio in lentil starch resulted into low crystallinity and gelatinization enthalpy. Gelatinization and pasting temperatures of lentil starch were in between those of corn and potato starches. Lentil starch gels showed the highest storage modulus, gel strength and pasting viscosity than corn and potato starch gels. Peleg's model was able to predict the stress relaxation data of these starches well (R2 > 0.98). The elastic modulus of lentil starch gel was less frequency dependent and higher in magnitude at high temperature (60 °C) than at lower temperature (10 °C). Lentil starch is suitable where higher gel strengthened pasting viscosity are desired. © 2012 Elsevier Ltd.
- Description: 2003011035
Interfacial and emulsifying properties of lentil protein isolate
- Authors: Joshi, Matina , Adhikari, Benu , Aldred, Peter , Panozzo, Joe , Kasapis, Stefan , Barrow, Colin
- Date: 2012
- Type: Text , Journal article
- Relation: Food Chemistry Vol.134 no.3 (2012), p.343-1353
- Full Text:
- Reviewed:
- Description: The dynamic interfacial tension (DIFT) at oil-water interface, diffusion coefficients, surface hydrophobicity, zeta potential and emulsifying properties, including emulsion activity index (EAI), emulsion stability index (ESI) and droplet size of lentil protein isolate (LPI), were measured at different pH and LPI concentration, in order to elucidate its emulsifying behaviour. Sodium caseinate (NaCas), whey protein isolate (WPI), bovine serum albumin (BSA) and lysozyme (Lys) were used as benchmark proteins and their emulsifying property was compared with that of LPI. The speed of diffusion-controlled migration of these proteins to the oil/water interface, was in the following order: NaCas > LPI > WPI > BSA > Lys, while their surface hydrophobicity was in the following order: BSA > LPI > NaCas > WPI > Lys. The EAI of emulsions stabilised by the above proteins ranged from 90.3 to 123.3 m 2/g and it was 93.3 ± 0.2 m 2/g in LPI-stabilised emulsion. However, the stability of LPI-stabilised emulsions was slightly lower compared to that of WPI and NaCas-stabilised emulsions at the same protein concentration at pH 7.0. The ESI of LPI emulsions improved substantially with decrease in droplet size when protein concentration was increased (20-30 mg/ml). Reduction of disulphide bonds enhanced both the EAI and ESI compared to untreated samples. Heat treatment of LPI dispersions resulted in poor emulsion stability due to molecular aggregation. The stability of LPI-stabilised emulsions was found to decrease in the presence of NaCl. This study showed that LPI can be as effective emulsifiers of oil-in-water emulsions as are WPI and NaCas at ≥20 mg/ml concentrations both at low and neutral pH. The emulsifying property of LPI can be improved by reducing the intra and inter-disulphide bond by using appropriate reducing agents. © 2012 Elsevier Ltd. All rights reserved.
Annual ryegrass (Lolium rigidum Gaud) competition altered wheat grain quality : A study under elevated atmospheric CO2 levels and drought conditions
- Authors: Fernando, Nimesha , Florentine, Singarayer , Naiker, Mani , Panozzo, Joe , Chauhan, Bhagirath
- Date: 2019
- Type: Text , Journal article
- Relation: Food Chemistry Vol. 276, no. (2019), p. 285-290
- Full Text:
- Reviewed:
- Description: Annual ryegrass is one of the most serious, costly weeds of winter cropping systems in Australia. To determine whether its competition-mediated plant defence mechanisms effect on wheat grain quality, wheat (cv. Yitpi) and annual ryegrass were grown under two levels of CO2 (400 ppm; (a[CO2]) vs 700 ppm; (e[CO2]), two levels of water (well-watered vs drought) and two types of competition (wheat only; (W), and wheatxannual ryegrass; (W x R) with four replicates. The competitionx[CO2] interaction had a significant effect on wheat grain protein content, where it was increased in W x R under both e[CO2] (+ 17%) and a[CO2] (+ 21%). Grain yield, total grain reducing power and phenolic content were significantly affected by [CO2] x drought x competition. In a summary, annual ryegrass competition significantly altered the wheat grain quality under both [CO2] levels (depending on the soil water level), while also decreasing the grain yield.