A case study of grinding coarse 5 mm particles into sand grade particles less than 2.36 mm
- Authors: Reed, Aaron , Koroznikova, Larissa , Khandelwal, Manoj
- Date: 2021
- Type: Text , Journal article
- Relation: Vietnam Journal of Earth Sciences Vol. 43, no. 1 (2021), p. 57-70
- Full Text:
- Reviewed:
- Description: This paper presents the viability study of utilising a rod or ball mill to grind a ‘5 mm grit’ to 100% passing 2.36 mm and fit in with a desired particle size analysis. The aim is to introduce this grit into the concrete grade sand produced at the Hanson owned Axedale Sand & Gravel quarry to reduce generated waste and improve the process efficiency. A ball mill and rod mill were used to grind the samples at an interval of 5 and 10 minutes. From the laboratory experimental analysis, it was found that a ball mill with 5 minutes grinding time in closed-circuit using a classifier to remove undersize and reintroduce oversize to the mill would be a viable option in an industrial setting. A Bond Ball Mill Grindability Test was undertaken to determine the grindability of the 5 mm grit, which served to determine the power (kWh/t) required to grind it to 100% passing 2.36 mm. The bond ball mill grindability test showed that the grit had a work index value of 17.66 kWh/t. This work index gives an actual work input of 13.54 kWh/t, meaning that for every ton of feed material introduced to the mill, 13.54 kWh of work input is required to grind it to 150 microns. © 2021 Vietnam Academy of Science and Technology.
Application of the heavy suspension technique for ore beneficiation plant feed characterisation from the Southern Middleback ranges
- Authors: Koroznikova, Larissa , Jasper, J , Begelhole, Jason
- Date: 2013
- Type: Text , Conference paper
- Relation: Second Ausimm International Geometallurgy conference
- Full Text: false
- Reviewed:
- Description: This paper outlines a comparison of heavy liquid and heavy suspension separation methods for iron ore characterisation. As part of Arrium Mining’s program to improve its knowledge of ore types being processed in its two hematite ore beneficiation plants (OBP), metallurgical evaluation of hematite feed for the upgrading process has become a major focus. Iron ore deposits almost always contain more than one valuable (and relatively dense) iron mineral. Iron ores are found with a range of iron contents, giving rise to density variations. At present the industry relies on heavy liquid separation techniques for the evaluation of iron ore samples arising from exploration, mining or metallurgical processes. There are only a few highdensity liquids available, which are both high-cost and highly toxic. Low-toxicity solutions that can be utilised at relative densities up to 3.0 have been developed. However, highly-toxic organic liquids are required presently to achieve relative densities beyond 3.0. Bromoform which has a specific gravity (SG) of 2.89, and diiodomethane (SG 3.31) are commonly used; both present significant health and safety hazards. ‘Clerici’s solution’ (mixtures of thallium formate and thallium malonate) provide liquids having specific gravities between 4.0 and 5.0. Clerici’s solution is highly toxic and testing is currently conducted by a limited number of laboratories worldwide. An alternative to Clerici’s solution and organic liquids is a low-toxicity, high-SG, suspension technique, which has been demonstrated successfully for heavy mineral sands. This heavy suspension method employs mixtures of fine tungsten carbide particles in lithium heteropolytungstate (LST) solutions
Application of thermal fragmentation in Australian hard rock underground narrow-vein mining
- Authors: Drake, Bradley , Koroznikova, Larissa , Tuck, Michael , Durkin, Steve
- Date: 2020
- Type: Text , Journal article
- Relation: Mining, Metallurgy and Exploration Vol. 37, no. 1 (2020), p. 219-229
- Full Text:
- Reviewed:
- Description: This paper presents the results from the investigation of the application of thermal fragmentation in Australian hard rock underground narrow-vein mining. Two geologically similar samples from an underground narrow-vein hard rock gold mine were collected to obtain a measure of the technology’s ability to recover ore by the creation of large thermal openings to assess the applicability of the thermal method. Particle size distribution showed a higher generation of fine product, − 2 mm, by thermal fragmentation compared with selective blasting by 31%. The Bond work index for thermal ore (12.62 kWh/t) is half to that of the blasted ore value (25.32 kWh/t). The average grindability obtained for the thermal ore sample was greater than the blasted sample by a factor of 2.44, a higher value indicating a decrease in the energy required to grind. The thermal fragmentation method generates product with higher dissolution of gold in cyanide, by 14% for the − 9.5 + 2 mm size fraction samples. Additionally, the thermal fragmentation results in higher production of − 9.5 + 2 mm material by 15 % compared with selective blasting. © 2019, Society for Mining, Metallurgy & Exploration Inc.
Characterisation of Low-grade Hematite Ore Ultra-fine Size Fraction Particles by Heavy Suspension
- Authors: Koroznikova, Larissa , Begelhole, Jason , McKnight, Stafford
- Date: 2016
- Type: Text , Conference paper
- Relation: Third AusIMM International Geometallurgy Conference 2016 p. 327–334
- Full Text: false
- Reviewed:
Concentration of metals in selected ANZ beers using ICP spectroscopy
- Authors: Koroznikova, Larissa , Karbanenco, Shelley , Aldred, Peter , Razavi, Kamal Seyed
- Date: 2016
- Type: Text , Conference paper
- Relation: International Symposium on Life Science & Biological Engineering
- Full Text: false
- Reviewed:
Drill and blast optimisation at an underground copper-gold mine
- Authors: Guegan-Brown, Alex , Koroznikova, Larissa , Khandelwal, Manoj
- Date: 2022
- Type: Text , Conference paper
- Relation: International Conference on Geotechnical challenges in Mining, Tunneling and Underground structures, ICGMTU 2021, Virtual, Online, 20-21 December 2021, Lecture Notes in Civil Engineering Vol. 228, p. 343-354
- Full Text: false
- Reviewed:
- Description: The process of utilising drill and blast techniques is used to improve mining performance. Drill and blast techniques have been proven to be more efficient and cost-effective compared to conventional mechanical rock breakage with machines. The degree of efficiency of the drill and blast process varies from mine to mine. These influencing factors result in drill and blast patterns that cannot be directly transposed from site to site meaning specific plans need to be developed. When creating new blast plans, unless they are created flawlessly the first-time revision or optimisation is necessary to ensure they are as efficient and effective as possible. The drill and blast patterns can be optimised to reduce the overbreak. A site specifically the current development is mining in both a weaker fragmented shale as well as moving down into a more competent granite. The optimisation will be considered for both types of ground but will have a stronger focus moving into the granite as the mine is approaching the first ore drives which are within the granite rock mass. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
Evaluation and assessment of blast-induced ground vibrations in an underground gold mine : a case study
- Authors: Tribe, Jarryd , Koroznikova, Larissa , Khandelwal, Manoj , Giri, Jason
- Date: 2021
- Type: Text , Journal article
- Relation: Natural Resources Research Vol. 30, no. 6 (2021), p. 4673-4694
- Full Text: false
- Reviewed:
- Description: Ground vibrations induced during rock fragmentation by blasting remain a potential source of hazard for the stability of nearby structures. In this paper, to forecast the effect of blast-induced ground vibrations, dimensional analysis (DA) is proposed to predict peak particle velocity (PPV). In conventional predictor equations, the major and critical parameter for the estimation of PPV is square root scaled distance. The new formula based on DA was obtained considering various blast design parameters in order to improve the capability of PPV prediction. After obtaining the new DA equation for the prediction of PPV, 360 data sets were used to determine the unknown coefficients of the new equation as well as site constants of different conventional predictor equations. Then, ten additional randomly selected data sets were used to compare the capability of the new model with conventional predictor equations. The results were compared based on coefficient of determination (R2) and mean absolute error (MAE) between measured and predicted values of PPV. The proposed formula with the greatest R2 and the lowest MAE was the better option for predicting the PPV of induced vibrations for the measured field data. © 2021, International Association for Mathematical Geosciences.
Feasibility study and design of an underground entry/access structure at an underground gold mine
- Authors: Carlisles, B. , Koroznikova, Larissa , Javidan, Fatemeh , Khandelwal, Manoj
- Date: 2022
- Type: Text , Conference paper
- Relation: 56th U.S. Rock Mechanics/Geomechanics Symposium, Santa Fe, USA, 26-29 June 2022, 56th U.S. Rock Mechanics/Geomechanics Symposium
- Full Text: false
- Reviewed:
- Description: This paper investigates the viability of an increase in waste rock storage by backfilling the Falcon pit and extending the portal of the Fosterville gold mine, located in Bendigo, Australia. The structure will maintain the current access to the tunnel whilst developing a fillable void. Once completed the project will allow for a total increase of 900, 000 cubic metres of storage. Furthermore, a finite element study has been conducted to investigate the structural performance of a proposed design using corrugated steel sheets. Stresses and displacements are studied taking into account various design factors such as steel properties and geometry. Results demonstrate the location of critical stress values according to the proposed design. The selection of optimum steel geometry is also investigated with regards to the factor of safety. © 2022 ARMA, American Rock Mechanics Association.
Mechano-chemical oxidation of arsenopyrite
- Authors: Koroznikova, Larissa , McKnight, Stafford , Veder, Jean-Peirre , Giri, Jason , Palaniandy, Samayamutthirian , Williams, Gordon
- Date: 2019
- Type: Text , Journal article
- Relation: Minerals Engineering Vol. 141, no. (2019), p. 1-7
- Full Text: false
- Reviewed:
- Description: This paper presents the results from the investigation of arsenopyrite oxidation via mechano-chemical activation, using a stirred mill. Water and hydrogen peroxide were chosen as the lixiviant and oxidant, respectively, and maintained at a relatively low temperature (50 °C). The milling media size, mill speed, slurry percent solids and amount of H2O2 added were all kept constant throughoust these experiments. The only operational variable for this investigation was the milling time, which results in increasing levels of specific energy provided by the mill. The products of activated arsenopyrite are characterised in terms of phase composition, particulate and structural characteristics, along with reactivity. Mechano-chemical activation of arsenopyrite under oxidizing conditions shows a maximum dissolution of around 9 wt% for iron and 7 wt% for arsenic after 2 h of milling. After 3 h of milling, the main phase present is found to be amorphous in nature.
The development of heavy suspension techniques for high density sink-float separations (replacement of Clerici's solution)
- Authors: Klutke, Cameron , Koroznikova, Larissa , McKnight, Stafford , Hall, Stephen
- Date: 2006
- Type: Text , Conference paper
- Relation: Paper presented at The AusIMM new Leaders Conference 2006, Kalgoorlie : 11th April, 2006
- Full Text: false
- Reviewed:
- Description: Mineral sands represent an important new resource being developed in the Murray Basin, including parts of western Victoria. This paper will outline a simple methodology for mineral sands characterisation, developed as part of the AMIRA-managed project P777 ‘The Development of Heavy Suspension Techniques for High Density Separations (Replacement of Clerici’s Solution)’. This project is currently sponsored by three multinational mining companies (De Beers Consolidated Mines, Iluka Resources Limited and Rio Tinto Limited) and is developing an innovative laboratory mineral characterisation procedure that will allow the replacement of the currently employed highly-toxic chemicals. Mineral sand resources almost always contain more than one valuable (and relatively heavy) mineral. Titanium minerals are found with a large range of titanium contents, giving rise to density variation and often subjective mineralogical descriptions. Companies tend to rely on laboratory heavy liquid separation in the evaluation of samples arising from exploration, mining or metallurgical processes. Unfortunately, there are only a limited number of high density (‘heavy’) liquids and these tend to be more toxic as their density increases. Low-toxicity inorganic solutions, based on tungsten compounds, have been developed that can be utilised at relative densities (RD) up to 3.0. However, beyond this value currently only organic liquids can be used. Diiodomethane (methylene iodide) having a relative density of 3.31 is commonly used; however, this presents significant health and safety hazards. Mixtures of thallium formate and thallium malonate were found in the early 1900s by Clerici to provide liquids having specific gravities between 4.0 and 5.0, hence ‘Clerici’s solution’. For the characterisation of the heavy components of mineral sand deposits (eg anatase sg 3.9, rutile sg 4.2, ilmenite sg 4.4 – 4.7 and zircon sg 4.6 – 4.8) there is currently no heavy liquid alternative to Clerici’s solution. Clerici’s solution is highly toxic and testing is now conducted by very few laboratories worldwide with costs reflecting the chemical costs (though extensive efforts are made to recover and reuse the liquid, plus the requirement of its removal from the mineral samples), the infrastructure costs and health and safety regimes (eg blood testing of exposed staff, inventory management). A simple laboratory technique of density fractionation is being developed, employing suspensions of fine tungsten carbide particles in lithium heteropolytungstate (LST) solutions, that can replace Clerici’s solution in the evaluation of fine mineral sands samples (eg -250+150 microns). The developing methodology that can achieve low-cost, low-toxic separations at relative densities above 5.0 will be outlined and the comparison of results with Clerici’s solution presented.
- Description: E1
- Description: 2003001621
The use of low-toxic heavy suspensions in mineral sands evaluation and zircon fractionation
- Authors: Koroznikova, Larissa , Klutke, Cameron , McKnight, Stafford , Hall, Stephen
- Date: 2008
- Type: Text , Journal article
- Relation: Journal of The South African Institute of Mining and Metallurgy Vol. 108, no. 1 (2008), p. 25-33
- Full Text:
- Reviewed:
- Description: This paper outlines a simple methodology for mineral characterization, developed as part of the Australian Mineral Industry Research Association (AMIRA) managed research project P777 'The Development of Heavy Suspension Techniques for High Density Separations (Replacement of Clerici's Solution)'. The project was sponsored by De Beers, Rio Tinto and Iluka Resources. Heavy mineral characterization of samples arising from exploration, mining or metallurgical processes is frequently conducted using laboratory heavy liquid analysis. Unfortunately, there are only a limited number of high density ('heavy') liquids and these tend to be more toxic as their density increases. Low-toxicity inorganic solutions, based on tungsten compounds, have been developed that can be utilized at relative densities (RD) up to 3.0. Beyond this value organic liquids can be used; however, this presents significant health and safety hazards. Diiodomethane (methylene iodide) having a relative density of 3.31 is commonly used. Mixtures of thallium formate and thallium malonate were found in the early 1900s by Clerici to provide liquids having specific gravities between 4.0 and 5.0. For the characterization of the heavy components of mineral sand deposits (e.g. anatase RD 3.9, rutile RD 4.2, ilmenite RD 4.4-4.7 and zircon RD 4.6-4.8) there is currently no heavy liquid alternative to Clerici's solution. Clerici's solution is highly toxic and testing is now conducted by few laboratories worldwide, with costs reflecting the chemical costs, infrastructure costs and health and safety regimes (e.g. blood testing of exposed staff). A simple laboratory technique of density fractionation has been developed, employing suspensions of fine tungsten carbide particles in lithium heteropolytungstates solutions, that can replace Clerici's solution in the evaluation of fine mineral sands samples (e.g. -250 +150 microns). The developing methodology that can achieve low-cost, low-toxic separations at relative densities above 4.0 is outlined and the comparison of results with Clerici's solution presented. In addition, preliminary work on density fractionation of zircon samples is presented. Zircon fractionation relates to their inclusion, radionuclide content and metamictization. © The Southern African Institute of Mining and Metallurgy, 2008.
- Description: C1
Thermal fragmentation as a possible, viable, alternative mining method in narrow vein mining?
- Authors: Bouwmeester, Patrick , Tuck, Michael , Koroznikova, Larissa , Durkin, Steve
- Date: 2020
- Type: Text , Journal article
- Relation: Mining, Metallurgy and Exploration Vol. 37, no. 2 (2020), p. 605-618
- Full Text:
- Reviewed:
- Description: In currently used mining methods, blasting techniques often causes dilution of valuable ore and results in costly processing requirements. In the context of narrow vein mining of thin and highly concentrated orebodies there is a need of a mining method that can reduce dilution in order to remain economically viable. This research project explored the viability of a new mining technology, thermal fragmentation, in narrow vein mining. Thermal fragmentation technology uses a flame jet to produce extreme heat that spalls the surrounding rock to a strategically located drill hole, as an alternative to traditional blasting. This paper creates a net present value (NPV) model of a mining method using thermal fragmentation, as well as for an existing method used for narrow vein mining; comparisons and evaluations were made regarding the feasibility of the new technology. It was found that while overall costs for thermal fragmentation were relatively high, reductions in wages, haulage and processing costs, as well as increased productivity and ore recovery, meant that the new method would improve the financial performance of any operation. These results identify that there is an opportunity to introduce the thermal fragmentation technology to narrow vein mines within Australia, in order to lower costs and increase profit. © 2019, Society for Mining, Metallurgy & Exploration Inc.