Application of ground penetrating radar (GPR) to detect joints in organic soft rock
- Authors: Tolooiyan, Ali , Dyson, Ashley , Karami, Mojtaba , Shaghaghi, Tahereh , Ghadrdan, Mohsen
- Date: 2019
- Type: Text , Journal article
- Relation: Geotechnical Testing Journal Vol. 42, no. 2 (2019), p.
- Full Text: false
- Reviewed:
- Description: The detection of joints and discontinuities is of particular importance to the stability of a broad range of geostructures, including slopes and underground and open-pit mines. As a common example, the mechanical response of soft rocks observed within open-pit mines is significantly influenced by the existence of joint networks, resulting in a complex stress distribution that governs the stability factor of safety as well as the failure mechanism. In this article, surface geophysics scanning by ground penetrating radar (GPR) is presented for the detection of vertical joints at one of the largest open-pit coal mines in Australia. The optimum soil velocity, point interval, and antenna frequency for joint detection in Victorian Brown Coal (VBC) are presented in comparison with electromagnetic properties of known organic soils. Furthermore, the performance of an assorted set of post-processing signal filtering techniques to successfully identify the underground coal fractures are detailed, along with obstructions affecting the feasibility of GPR vertical joint discovery in this light organic soft rock.
Effect of negative excess pore-water pressure on the stability of excavated slopes
- Authors: Ghadrdan, Mohsen , Shaghaghi, Tahereh , Tolooiyan, Ali
- Date: 2020
- Type: Text , Journal article
- Relation: Geotechnique Letters Vol. 10, no. 1 (Mar 2020), p. 20-29
- Full Text:
- Reviewed:
- Description: Generation of negative excess pore-water pressure (NEPWP) due to the excavation of saturated soils under undrained conditions and the dissipation that follows over time may result in different short- and long-term slope instability. The NEPWP generated due to excavation gradually decreases towards equilibrium or, in some cases, steady seepage. Hence, total pore-water pressures immediately after excavation are lower than the ultimate equilibrium values, leading to a reduction of the average effective stresses in the slope and subsequently threatening stability in the long term. In this research study, the stability of three benchmark civil and mining excavations has been studied, considering the effects of the generation and dissipation of NEPWP. A series of numerical simulations are conducted to determine the role of in situ stresses and time in NEPWP dissipation as well as the consequent effects on the stability of the excavated slopes. To conduct a realistic time-dependent transient analysis, fully coupled hydro-geomechanical formulation has been employed. Results show that in general, higher removal of stress levels lead to higher NEPWP generation and higher factor of safety values in the short term. Thereafter, the dissipation of NEPWP threatens the long-term stability of the excavation.
Investigation of an Australian soft rock permeability variation
- Authors: Tolooiyan, Ali , Dyson, Ashley , Karami, Mojtaba , Shaghaghi, Tahereh , Ghadrdan, Mohsen
- Date: 2020
- Type: Text , Journal article
- Relation: Bulletin of Engineering Geology and the Environment Vol. 79, no. 6 (2020), p. 3087-3104
- Full Text: false
- Reviewed:
- Description: In this study, permeabilities of Victorian Brown Coal (VBC) as an Australian soft rock are determined for a range of depths of a continuous coal seam located at the batter crest of the Yallourn brown coal open-cut mine in Victoria, Australia, by implementing a Lugeon packer testing procedure. Permeability values are determined both analytically and by numerical simulation and are compared with laboratory test results. Field testing resulted in permeabilities several orders of magnitude higher than laboratory testing, suggesting the existence of fractures common to lignite structures on a greater scale than can be observed in the laboratory. The variation of depth-based field and laboratory permeabilities is discussed, as well as the necessary conditions required for the numerical modelling of packer testing within VBC. © 2020, Springer-Verlag GmbH Germany, part of Springer Nature.
- Description: Department of Economic Development, Jobs, Transport and Resources, DSDBI The second and third authors are funded by the Australian Government Research Training Program (RTP) and the GHERG scholarship programme.
Maximising the efficiency of Menard pressuremeter testing in cohesive materials by a cookie-cutter drilling technique
- Authors: Tolooiyan, Ali , Dyson, Ashley , Karami, Mojtaba , Shaghaghi, Tahereh , Ghadrdan, Mohsen , Tang, Zhan
- Date: 2021
- Type: Text , Journal article
- Relation: Engineering Geology Vol. 287, no. (Jun 2021), p. 106096
- Full Text: false
- Reviewed:
- Description: Menard pressuremeter testing has been widely used in geotechnical engineering applications for 40 years and is an important technique in determining in-situ horizontal stress distributions. In this study, Menard pressuremeter testing is combined with a "cookie-cutter" insertion technique to determine horizontal stresses for a soft-rock in an operational Australian mine. The method presents an alternative to the Self-Bored Pressuremeter, with cookie-cutter drill rods allowing for sample recovery and further laboratory testing. The method accommodates for the presence of gravel and hard layered materials that present a risk of damage to cutting shoes of Self-Bored Pressuremeter devices. The combination of a sonic drill rig, coupled with the cookie cutter rods produces a close tolerance pocket resulting in "pseudo self boring pressuremeter tests". The undrained shear strength, unload-reload shear modulus and in-situ horizontal stress are presented from pressuremeter tests conducted in the region for the first time. The undrained shear strength was observed in the range of 0.47-0.57 MPa, the unload-reload shear modulus between 17.43 and 18.25 MPa, the lift-off pressure in the range of 0.35-0.61 MPa. The K-0 of coal was equal to 1, with interseam materials ranging from 2.1 to 3.5. Results of the cookie-cutter insertion method are compared with conventional drilling methods, with the cookie-cutter insertion test providing results in good agreement with both advanced triaxial laboratory tests and FEM numerical analysis. Cookie-cutter pressuremeter tests were conducted on cohesive soils at Australia's second-largest open-pit mine, with pressuremeter test results presented for Victorian brown coal for the first time.
Sensitivity of the stability assessment of a deep excavation to the material characterisations and analysis methods
- Authors: Ghadrdan, Mohsen , Shaghaghi, Tahereh , Tolooiyan, Ali
- Date: 2020
- Type: Text , Journal article
- Relation: Geomechanics and Geophysics for Geo-Energy and Geo-Resources Vol. 6, no. 4 (2020), p.
- Full Text: false
- Reviewed:
- Description: Due to the spatial variability of material characterisations in deep and large scale excavations, stability assessment is often a challenging task. Numerous slope stability analysis methods based on a range of assumptions and principles are implemented in commercial software packages to ease the process of stability assessment of non-homogeneous and multi-layered slopes. However, the selection of a suitable method remains crucial as the application of an unrealistic or unsuitable method may lead to catastrophic consequences. Besides material shear strength parameters, and analysis methods, non-strength characterisations such as permeability and creep can affect the result of slope stability analysis significantly. In this study, the sensitivity of the stability assessment of a deep excavation in Australia to material characterisations such as friction angle, cohesion and permeability and creep is investigated by the use of different formulations and assumptions of the Limit Equilibrium Method (LEM) and the Finite Element Method (FEM) as the two most common slope stability methods. The results show that the stability assessment is highly sensitive to the applied method and assumptions. Moreover, the role of material strength and non-strength parameters and the selection of a suitable constitutive model in slope stability assessment is presented. © 2020, Springer Nature Switzerland AG.