Effect of pyrolysis conditions on bone char characterization and its ability for arsenic and fluoride removal
- Authors: Alkurdi, Susan , Al-Juboori, Raed , Bundschuh, Jochen , Bowtell, Les , McKnight, Stafford
- Date: 2020
- Type: Text , Journal article
- Relation: Environmental Pollution Vol. 262, no. (2020), p.
- Full Text: false
- Reviewed:
- Description: This study examined arsenite [As(III)], arsenate [As(V)] and fluoride (F−) removal potential of bone char produced from sheep (Ovis aries) bone waste. Pyrolysis conditions tested were in the 500 °C–900 °C range, for a holding time of 1 or 2 h, with or without N2 gas purging. Previous bone char studies mainly focused on either low or high temperature range with limited information provided on As(III) removal. This study aims to address these gaps and provide insights into the effect of pyrolysis conditions on bone char sorption capacity. A range of advanced chemical analyses were employed to track the change in bone char properties. As pyrolysis temperature and holding time increased, the resulting pH, surface charge, surface roughness, crystallinity, pore size and CEC all increased, accompanied by a decrease in the acidic functional groups and surface area. Pyrolysis temperature was a key parameter, showing improvement in the removal of both As(III) and As(V) as pyrolysis temperature was increased, while As(V) removal was higher than As(III) removal overall. F− removal displayed an inverse relationship with increasing pyrolysis temperature. Bone char prepared at 500 °C released significantly more dissolved organic carbon (DOC) then those prepared at a higher temperature. The bone protein is believed to be a major factor. The predominant removal mechanisms for As were surface complexation, precipitation and interaction with nitrogenous functional groups. Whereas F− removal was mainly influenced by interaction with oxygen functional groups and electrostatic interaction. This study recommends that the bone char pyrolysis temperature used for As and F− removal are 900 °C and 650 °C, respectively. © 2020 Elsevier Ltd
- Description: This research was performed as a part of PhD research which was supported in part by the Iraqi Government and the Australian Research Training Program.
Macadamia nutshell biochar for nitrate removal : Effect of biochar preparation and process parameters
- Authors: Bakly, Salam , Al-Juboori, Raed , Bowtell, Les
- Date: 2019
- Type: Text , Journal article
- Relation: C-Journal of Carbon Research Vol. 5, no. 3 (2019), p. 1-20
- Full Text:
- Reviewed:
- Description: Agricultural runoff is a major cause of degradation to freshwater sources. Nitrate is of particular interest, due to the abundant use of nitrogen-based fertilizers in agricultural practices globally. This study investigated the nitrate removal of biochar produced from an agricultural waste product, macadamia nutshell (MBC). Kinetic experiments and structural analyses showed that MBC pyrolsed at 900 degrees C exhibited inferior NO3- removal compared to that pyrolsed at 1000 degrees C, which was subsequently used in the column experiments. Concentrations of 5, 10 and 15 mg/L, with flowrates of 2, 5 and 10 mL/min, were examined over a 360 min treatment time. Detailed statistical analyses were applied using 2(3) factorial design. Nitrate removal was significantly affected by flowrate, concentration and their interactions. The highest nitrate removal capacity of 0.11 mg/g MBC was achieved at a NO3- concentration of 15 mg/L and flowrate of 2 mL/min. The more crystalline structure and rough texture of MBC prepared at 1000 degrees C resulted in higher NO3- removal compared to MBC prepared at 900 degrees C. The operating parameters with the highest NO3- removal were used to study the removal capacity of the column. Breakthrough and exhaustion times of the column were 25 and 330 min respectively. Approximately 92% of the column bed was saturated after exhaustion.