Dynamic operation of post-combustion CO2 capture in Australian coal-fired power plants
- Authors: Bui, Mai , Gunawan, Indra , Verheyen, Vincent , Meuleman, Erik , Feron, Paul
- Date: 2014
- Type: Text , Conference paper
- Relation: 12th International Conference on Greenhouse Gas Control Technologies, GHGT 2014 p. 1368-1375
- Full Text:
- Reviewed:
- Description: Flexible operation of post-combustion CO2 capture (PCC) plants can improve efficiency through coordinating the balance between consumer demands for electricity and CO2 emission reductions. This strategy however, will impose process disturbances and the immediate and long term impact is unclear. There is a justified need for the development of accurate dynamic PCC models, as well as practical experience in dynamic operation of PCC pilot plants. This paper presents CSIRO PCC pilot plant data from the 2012 and 2013 dynamic campaigns using MEA solvent. The step-change approach to dynamic plant operation was implemented and the use of density meters to instantaneously measure CO2 loading instantaneously was investigated.
Flexible operation of CSIRO's post-combustion CO2 capture pilot plant at the AGL Loy Yang power station
- Authors: Bui, Mai , Gunawan, Indra , Verheyen, Vincent , Feron, Paul , Meuleman, Erik
- Date: 2016
- Type: Text , Journal article
- Relation: International Journal of Greenhouse Gas Control Vol. 48, no. (May 2016), p. 188-203
- Full Text:
- Reviewed:
- Description: Flexible operation has the potehtial to significantly improve the economic viability of post-combustion CO2 capture (PCC). However, the impact of disturbances from flexible operation of the PCC process is unclear. The purpose of this study was to investigate the effects of flexible operation in a PCC pilot plant by implementing step-changes for improved dynamic data reliability. The flexible operation campaign was conducted at the CSIRO PCC pilot plant at AGL Loy Yang using monoethanolamine (MEA) absorbent. The pilot plant was operated under a broad range of transient conditions (changing flue gas flow, liquid absorbent flow and steam pressure) to capture the dynamics of a PCC process during flexible operation. The study demonstrated that the dynamics of flue gas flow rate was faster than absorbent flow rate. The greatest CO2 removal% was achieved at the lowest flue gas flow rate or at the highest absorbent flow rate; however, the latter provided improved energy efficiency. The steam pressure parameter could adjust the temperature of all columns simultaneously which can be used to compensate for effects from ambient conditions or heat losses. These results verify the technical feasibility of flexible PCC operation and provide a suitable dataset for dynamic model validation. (C) 2015 Elsevier Ltd. All rights reserved.
Energy sector development : system dynamics analysis
- Authors: Laimon, Mohamd , Mai, Thanh , Goh, Steven , Yusaf, Talal
- Date: 2020
- Type: Text , Journal article
- Relation: Applied Sciences-Basel Vol. 10, no. 1 (Jan 2020), p. 19
- Full Text:
- Reviewed:
- Description: The development of a complex and dynamic system such as the energy sector requires a comprehensive understanding of its constituent components and their interactions, and thus requires approaches that can adapt to the dynamic complexity in systems. Previous efforts mainly used reductionist approaches, which examine the components of the system in isolation, neglecting their interdependent nature. Such approaches reduce our ability to understand the system and/or mitigate undesirable outcomes. We adopt a system dynamics approach to construct an integrated model for analysing the behaviour of the energy sector. Although the Australian energy sector is used as a case study, the model can be applied in other context elsewhere around the world The results indicate that the current trajectory of the Australian energy sector is unsustainable and growth is not being controlled. Limits to growth are fast approaching due to excessive fossil fuel extraction, high emissions and high energy dependency. With the current growth, Australia's global CO2 emissions footprint will increase to unprecedented levels reaching 12% by 2030 (9.5% for exports and 2.5% for domestic). Oil dependency will account for 43% and 47% of total consumption by 2030 and 2050. By 2032, coal will be the only fossil fuel resource available in Australia. Expansion of investment in coal and gas production is a large risk.