The effect of instrumentation on the determination of the resilient modulus of unbound granular materials using advanced repeated load triaxial testing
- Authors: Zhalehjoo, Negin , Tolooiyan, Ali , Mackay, Rae , Bodin, Didier
- Date: 2018
- Type: Text , Journal article
- Relation: Transportation Geotechnics Vol. 14, no. (2018), p. 190-201
- Full Text: false
- Reviewed:
- Description: Unbound Granular Materials (UGMs) are used in the base/subbase layers of flexible pavement structures for the vast majority of the main roads around the world. The resilient modulus of UGMs is a key input parameter for the design and analysis of flexible pavement structures. In the present study, four road base UGMs with a range of moisture contents are used to evaluate each material's resilient deformation behaviour using laboratory repeated load triaxial tests. The triaxial system for the tests is instrumented with four axial deformation gauges: an on-specimen axial Hall-Effect transducer, an internal Linear Variable Differential Transformer (LVDT), an external LVDT, and the actuator LVDT. The application of a Hall-Effect transducer directly mounted on the specimen and the three LVDTs permits the comparative study of alternative deformation measurements for the determination of an accurate and reliable resilient modulus value. By comparing tests results obtained with each transducer, the relative capability of each measurement is determined and a reference transducer for deformation measurement is identified. A constitutive model is then used to carry out a regression analysis and to predict the resilient modulus of the four tested materials.
Characterisation of the deformation behaviour of unbound granular materials using repeated load triaxial testing
- Authors: Zhalehjoo, Negin
- Date: 2018
- Type: Text , Thesis , PhD
- Full Text:
- Description: Unbound Granular Materials (UGMs) are used in the base/subbase layers of flexible pavements for the majority of roads around the world. The deterioration of pavements increases with the increase of traffic loadings. To ensure the long-term performance and serviceability of pavement structures through a realistic design, the precise evaluation and comprehensive characterisation of the resilient and permanent deformation behaviour of pavement materials are essential. The present PhD study aims to investigate the characterisation of the resilient and permanent deformation behaviour of four road base UGMs sourced from quarries in Victoria, Australia, using Repeated Load Triaxial (RLT) testing. The triaxial system used in this study is instrumented with four axial deformation measurement transducers to achieve highly precise measurements and to evaluate the effect of instrumentation on the resilient modulus of UGMs. The resilient Poisson’s ratio of the studied UGMs is also determined using a radial Hall-Effect transducer. Moreover, a series of permanent deformation tests is performed to precisely characterise the axial and radial permanent deformation behaviour of UGMs and investigate the factors that may significantly influence the accumulated axial and radial permanent deformations. Finally, three permanent deformation models incorporated with a time-hardening procedure are employed to predict the magnitude of permanent strain for multiple stress levels of the RLT test. The predictions using the employed models are then compared against the measured values to evaluate the suitability of the models and to identify the model that best predicts the strain accumulation behaviour of the tested UGMs. While this study focuses on the resilient and permanent deformation behaviour of four Victorian UGMs under repeated loading, the knowledge generated from this comprehensive investigation will contribute towards the global development of more reliable methods for evaluating the long-term performance of pavement structures and minimising road maintenance and repair costs.
- Description: Doctor of Philosophy