Multi-agent systems in ICT enabled smart grid : A status update on technology framework and applications
- Shawon, Mohammad, Muyeen, S., Ghosh, Arindam, Islam, Syed, Baptista, Murilo
- Authors: Shawon, Mohammad , Muyeen, S. , Ghosh, Arindam , Islam, Syed , Baptista, Murilo
- Date: 2019
- Type: Text , Journal article
- Relation: IEEE Access Vol. 7, no. (2019), p. 97959-97973
- Full Text:
- Reviewed:
- Description: Multi-agent-based smart grid applications have gained much attention in recent times. At the same time, information and communication technology (ICT) has become a crucial part of the smart grid infrastructure. The key intention of this work is to present a comprehensive review of the literature and technological frameworks for the application of multi-agent system (MAS) and ICT infrastructure usages in smart grid implementations. In the smart grid, agents are defined as intelligent entities with the ability to take decisions and acting flexibly and autonomously according to their built-in intelligence utilizing previous experiences. Whereas, ICT enables conventional grid turned into the smart grid through data and information exchange. This paper summarizes the multi-agent concept of smart grid highlighting their applications through a detailed and extensive literature survey on the related topics. In addition to the above, a particular focus has been put on the ICT standards, including IEC 61850 incorporating ICT with MAS. Finally, a laboratory framework concepts have been added highlighting the implementation of IEC 61850.
- Authors: Shawon, Mohammad , Muyeen, S. , Ghosh, Arindam , Islam, Syed , Baptista, Murilo
- Date: 2019
- Type: Text , Journal article
- Relation: IEEE Access Vol. 7, no. (2019), p. 97959-97973
- Full Text:
- Reviewed:
- Description: Multi-agent-based smart grid applications have gained much attention in recent times. At the same time, information and communication technology (ICT) has become a crucial part of the smart grid infrastructure. The key intention of this work is to present a comprehensive review of the literature and technological frameworks for the application of multi-agent system (MAS) and ICT infrastructure usages in smart grid implementations. In the smart grid, agents are defined as intelligent entities with the ability to take decisions and acting flexibly and autonomously according to their built-in intelligence utilizing previous experiences. Whereas, ICT enables conventional grid turned into the smart grid through data and information exchange. This paper summarizes the multi-agent concept of smart grid highlighting their applications through a detailed and extensive literature survey on the related topics. In addition to the above, a particular focus has been put on the ICT standards, including IEC 61850 incorporating ICT with MAS. Finally, a laboratory framework concepts have been added highlighting the implementation of IEC 61850.
Diagnosing transformer winding deformation faults based on the analysis of binary image obtained from FRA signature
- Zhao, Zhongyong, Yao, Chenguo, Tang, Chao, Li, Chengxiang, Yan, Fayou, Islam, Syed
- Authors: Zhao, Zhongyong , Yao, Chenguo , Tang, Chao , Li, Chengxiang , Yan, Fayou , Islam, Syed
- Date: 2019
- Type: Text , Journal article
- Relation: IEEE Access Vol. 7, no. (2019), p. 40463-40474
- Full Text:
- Reviewed:
- Description: Frequency response analysis (FRA) has been widely accepted as a diagnostic tool for power transformer winding deformation faults. Typically, both amplitude-frequency and phase-frequency signatures are obtained by an FRA analyzer. However, most existing FRA analyzers use only the information on amplitude-frequency signature, while phase-frequency information is neglected. It is also found that in some cases, the diagnostic results obtained by FRA amplitude-frequency signatures do not comply with some hard evidence. This paper introduces a winding deformation diagnostic method based on the analysis of binary images obtained from FRA signatures to improve FRA outcomes. The digital image processing technique is used to process the binary image and obtain a diagnostic indicator, to arrive at an outcome for interpreting winding faults with improved accuracy.
- Authors: Zhao, Zhongyong , Yao, Chenguo , Tang, Chao , Li, Chengxiang , Yan, Fayou , Islam, Syed
- Date: 2019
- Type: Text , Journal article
- Relation: IEEE Access Vol. 7, no. (2019), p. 40463-40474
- Full Text:
- Reviewed:
- Description: Frequency response analysis (FRA) has been widely accepted as a diagnostic tool for power transformer winding deformation faults. Typically, both amplitude-frequency and phase-frequency signatures are obtained by an FRA analyzer. However, most existing FRA analyzers use only the information on amplitude-frequency signature, while phase-frequency information is neglected. It is also found that in some cases, the diagnostic results obtained by FRA amplitude-frequency signatures do not comply with some hard evidence. This paper introduces a winding deformation diagnostic method based on the analysis of binary images obtained from FRA signatures to improve FRA outcomes. The digital image processing technique is used to process the binary image and obtain a diagnostic indicator, to arrive at an outcome for interpreting winding faults with improved accuracy.
Continuous patient monitoring with a patient centric agent : A block architecture
- Uddin, Ashraf, Stranieri, Andrew, Gondal, Iqbal, Balasubramanian, Venki
- Authors: Uddin, Ashraf , Stranieri, Andrew , Gondal, Iqbal , Balasubramanian, Venki
- Date: 2018
- Type: Text , Journal article
- Relation: IEEE Access Vol. 6, no. (2018), p. 32700-32726
- Full Text:
- Reviewed:
- Description: The Internet of Things (IoT) has facilitated services without human intervention for a wide range of applications, including continuous remote patient monitoring (RPM). However, the complexity of RPM architectures, the size of data sets generated and limited power capacity of devices make RPM challenging. In this paper, we propose a tier-based End to End architecture for continuous patient monitoring that has a patient centric agent (PCA) as its center piece. The PCA manages a blockchain component to preserve privacy when data streaming from body area sensors needs to be stored securely. The PCA based architecture includes a lightweight communication protocol to enforce security of data through different segments of a continuous, real time patient monitoring architecture. The architecture includes the insertion of data into a personal blockchain to facilitate data sharing amongst healthcare professionals and integration into electronic health records while ensuring privacy is maintained. The blockchain is customized for RPM with modifications that include having the PCA select a Miner to reduce computational effort, enabling the PCA to manage multiple blockchains for the same patient, and the modification of each block with a prefix tree to minimize energy consumption and incorporate secure transaction payments. Simulation results demonstrate that security and privacy can be enhanced in RPM with the PCA based End to End architecture.
- Authors: Uddin, Ashraf , Stranieri, Andrew , Gondal, Iqbal , Balasubramanian, Venki
- Date: 2018
- Type: Text , Journal article
- Relation: IEEE Access Vol. 6, no. (2018), p. 32700-32726
- Full Text:
- Reviewed:
- Description: The Internet of Things (IoT) has facilitated services without human intervention for a wide range of applications, including continuous remote patient monitoring (RPM). However, the complexity of RPM architectures, the size of data sets generated and limited power capacity of devices make RPM challenging. In this paper, we propose a tier-based End to End architecture for continuous patient monitoring that has a patient centric agent (PCA) as its center piece. The PCA manages a blockchain component to preserve privacy when data streaming from body area sensors needs to be stored securely. The PCA based architecture includes a lightweight communication protocol to enforce security of data through different segments of a continuous, real time patient monitoring architecture. The architecture includes the insertion of data into a personal blockchain to facilitate data sharing amongst healthcare professionals and integration into electronic health records while ensuring privacy is maintained. The blockchain is customized for RPM with modifications that include having the PCA select a Miner to reduce computational effort, enabling the PCA to manage multiple blockchains for the same patient, and the modification of each block with a prefix tree to minimize energy consumption and incorporate secure transaction payments. Simulation results demonstrate that security and privacy can be enhanced in RPM with the PCA based End to End architecture.
Efficient video coding using visual sensitive information for HEVC coding standard
- Podder, Pallab, Paul, Manoranjan, Murshed, Manzur
- Authors: Podder, Pallab , Paul, Manoranjan , Murshed, Manzur
- Date: 2018
- Type: Text , Journal article
- Relation: IEEE Access Vol. 6, no. (2018), p. 75695-75708
- Full Text:
- Reviewed:
- Description: The latest high efficiency video coding (HEVC) standard introduces a large number of inter-mode block partitioning modes. The HEVC reference test model (HM) uses partially exhaustive tree-structured mode selection, which still explores a large number of prediction unit (PU) modes for a coding unit (CU). This impacts on encoding time rise which deprives a number of electronic devices having limited processing resources to use various features of HEVC. By analyzing the homogeneity, residual, and different statistical correlation among modes, many researchers speed-up the encoding process through the number of PU mode reduction. However, these approaches could not demonstrate the similar rate-distortion (RD) performance with the HM due to their dependency on existing Lagrangian cost function (LCF) within the HEVC framework. In this paper, to avoid the complete dependency on LCF in the initial phase, we exploit visual sensitive foreground motion and spatial salient metric (FMSSM) in a block. To capture its motion and saliency features, we use the dynamic background and visual saliency modeling, respectively. According to the FMSSM values, a subset of PU modes is then explored for encoding the CU. This preprocessing phase is independent from the existing LCF. As the proposed coding technique further reduces the number of PU modes using two simple criteria (i.e., motion and saliency), it outperforms the HM in terms of encoding time reduction. As it also encodes the uncovered and static background areas using the dynamic background frame as a substituted reference frame, it does not sacrifice quality. Tested results reveal that the proposed method achieves 32% average encoding time reduction of the HM without any quality loss for a wide range of videos.
- Authors: Podder, Pallab , Paul, Manoranjan , Murshed, Manzur
- Date: 2018
- Type: Text , Journal article
- Relation: IEEE Access Vol. 6, no. (2018), p. 75695-75708
- Full Text:
- Reviewed:
- Description: The latest high efficiency video coding (HEVC) standard introduces a large number of inter-mode block partitioning modes. The HEVC reference test model (HM) uses partially exhaustive tree-structured mode selection, which still explores a large number of prediction unit (PU) modes for a coding unit (CU). This impacts on encoding time rise which deprives a number of electronic devices having limited processing resources to use various features of HEVC. By analyzing the homogeneity, residual, and different statistical correlation among modes, many researchers speed-up the encoding process through the number of PU mode reduction. However, these approaches could not demonstrate the similar rate-distortion (RD) performance with the HM due to their dependency on existing Lagrangian cost function (LCF) within the HEVC framework. In this paper, to avoid the complete dependency on LCF in the initial phase, we exploit visual sensitive foreground motion and spatial salient metric (FMSSM) in a block. To capture its motion and saliency features, we use the dynamic background and visual saliency modeling, respectively. According to the FMSSM values, a subset of PU modes is then explored for encoding the CU. This preprocessing phase is independent from the existing LCF. As the proposed coding technique further reduces the number of PU modes using two simple criteria (i.e., motion and saliency), it outperforms the HM in terms of encoding time reduction. As it also encodes the uncovered and static background areas using the dynamic background frame as a substituted reference frame, it does not sacrifice quality. Tested results reveal that the proposed method achieves 32% average encoding time reduction of the HM without any quality loss for a wide range of videos.
An enhancement to the spatial pyramid matching for image classification and retrieval
- Karmakar, Priyabrata, Teng, Shyh, Lu, Guojun, Zhang, Dengsheng
- Authors: Karmakar, Priyabrata , Teng, Shyh , Lu, Guojun , Zhang, Dengsheng
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 22463-22472
- Full Text:
- Reviewed:
- Description: Spatial pyramid matching (SPM) is one of the widely used methods to incorporate spatial information into the image representation. Despite its effectiveness, the traditional SPM is not rotation invariant. A rotation invariant SPM has been proposed in the literature but it has many limitations regarding the effectiveness. In this paper, we investigate how to make SPM robust to rotation by addressing those limitations. In an SPM framework, an image is divided into an increasing number of partitions at different pyramid levels. In this paper, our main focus is on how to partition images in such a way that the resulting structure can deal with image-level rotations. To do that, we investigate three concentric ring partitioning schemes. Apart from image partitioning, another important component of the SPM framework is a weight function. To apportion the contribution of each pyramid level to the final matching between two images, the weight function is needed. In this paper, we propose a new weight function which is suitable for the rotation-invariant SPM structure. Experiments based on image classification and retrieval are performed on five image databases. The detailed result analysis shows that we are successful in enhancing the effectiveness of SPM for image classification and retrieval. © 2013 IEEE.
- Authors: Karmakar, Priyabrata , Teng, Shyh , Lu, Guojun , Zhang, Dengsheng
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 22463-22472
- Full Text:
- Reviewed:
- Description: Spatial pyramid matching (SPM) is one of the widely used methods to incorporate spatial information into the image representation. Despite its effectiveness, the traditional SPM is not rotation invariant. A rotation invariant SPM has been proposed in the literature but it has many limitations regarding the effectiveness. In this paper, we investigate how to make SPM robust to rotation by addressing those limitations. In an SPM framework, an image is divided into an increasing number of partitions at different pyramid levels. In this paper, our main focus is on how to partition images in such a way that the resulting structure can deal with image-level rotations. To do that, we investigate three concentric ring partitioning schemes. Apart from image partitioning, another important component of the SPM framework is a weight function. To apportion the contribution of each pyramid level to the final matching between two images, the weight function is needed. In this paper, we propose a new weight function which is suitable for the rotation-invariant SPM structure. Experiments based on image classification and retrieval are performed on five image databases. The detailed result analysis shows that we are successful in enhancing the effectiveness of SPM for image classification and retrieval. © 2013 IEEE.
A low-complexity equalizer for video broadcasting in cyber-physical social systems through handheld mobile devices
- Solyman, Ahmad, Attar, Hani, Khosravi, Mohammad, Menon, Varun, Jolfaei, Alireza, Balasubramanian, Venki, Selvaraj, Buvana, Tavallali, Pooya
- Authors: Solyman, Ahmad , Attar, Hani , Khosravi, Mohammad , Menon, Varun , Jolfaei, Alireza , Balasubramanian, Venki , Selvaraj, Buvana , Tavallali, Pooya
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 67591-67602
- Full Text:
- Reviewed:
- Description: In Digital Video Broadcasting-Handheld (DVB-H) devices for cyber-physical social systems, the Discrete Fractional Fourier Transform-Orthogonal Chirp Division Multiplexing (DFrFT-OCDM) has been suggested to enhance the performance over Orthogonal Frequency Division Multiplexing (OFDM) systems under time and frequency-selective fading channels. In this case, the need for equalizers like the Minimum Mean Square Error (MMSE) and Zero-Forcing (ZF) arises, though it is excessively complex due to the need for a matrix inversion, especially for DVB-H extensive symbol lengths. In this work, a low complexity equalizer, Least-Squares Minimal Residual (LSMR) algorithm, is used to solve the matrix inversion iteratively. The paper proposes the LSMR algorithm for linear and nonlinear equalizers with the simulation results, which indicate that the proposed equalizer has significant performance and reduced complexity over the classical MMSE equalizer and other low complexity equalizers, in time and frequency-selective fading channels. © 2013 IEEE.
- Authors: Solyman, Ahmad , Attar, Hani , Khosravi, Mohammad , Menon, Varun , Jolfaei, Alireza , Balasubramanian, Venki , Selvaraj, Buvana , Tavallali, Pooya
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 67591-67602
- Full Text:
- Reviewed:
- Description: In Digital Video Broadcasting-Handheld (DVB-H) devices for cyber-physical social systems, the Discrete Fractional Fourier Transform-Orthogonal Chirp Division Multiplexing (DFrFT-OCDM) has been suggested to enhance the performance over Orthogonal Frequency Division Multiplexing (OFDM) systems under time and frequency-selective fading channels. In this case, the need for equalizers like the Minimum Mean Square Error (MMSE) and Zero-Forcing (ZF) arises, though it is excessively complex due to the need for a matrix inversion, especially for DVB-H extensive symbol lengths. In this work, a low complexity equalizer, Least-Squares Minimal Residual (LSMR) algorithm, is used to solve the matrix inversion iteratively. The paper proposes the LSMR algorithm for linear and nonlinear equalizers with the simulation results, which indicate that the proposed equalizer has significant performance and reduced complexity over the classical MMSE equalizer and other low complexity equalizers, in time and frequency-selective fading channels. © 2013 IEEE.
Dual cost function model predictive direct speed control with duty ratio optimization for PMSM drives
- Liu, Ming, Hu, Jiefeng, Chan, Ka, Or, Siu, Ho, Siu, Xu, Wenzheng, Zhang, Xian
- Authors: Liu, Ming , Hu, Jiefeng , Chan, Ka , Or, Siu , Ho, Siu , Xu, Wenzheng , Zhang, Xian
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 126637-126647
- Full Text:
- Reviewed:
- Description: Traditional speed control of permanent magnet synchronous motors (PMSMs) includes a cascaded speed loop with proportional-integral (PI) regulators. The output of this outer speed loop, i.e. electromagnetic torque reference, is in turn fed to either the inner current controller or the direct torque controller. This cascaded control structure leads to relatively slow dynamic response, and more importantly, larger speed ripples. This paper presents a new dual cost function model predictive direct speed control (DCF-MPDSC) with duty ratio optimization for PMSM drives. By employing accurate system status prediction, optimized duty ratios between one zero voltage vector and one active voltage vector are firstly deduced based on the deadbeat criterion. Then, two separate cost functions are formulated sequentially to refine the combinations of voltage vectors, which provide two-degree-of-freedom control capability. Specifically, the first cost function results in better dynamic response, while the second one contributes to speed ripple reduction and steady-state offset elimination. The proposed control strategy has been validated by both Simulink simulation and hardware-in-the-loop (HIL) experiment. Compared to existing control methods, the proposed DCF-MPDSC can reach the speed reference rapidly with very small speed ripple and offset. © 2013 IEEE.
- Description: This work was supported in part by the Research Grants Council of the Hong Kong Special Administrative Region (HKSAR) Government under Grant R5020-18, and in part by the Innovation and Technology Commission of the HKSAR Government to the Hong Kong Branch of National Rail Transit Electrification and Automation Engineering Technology Research Center under Grant K-BBY1.
- Authors: Liu, Ming , Hu, Jiefeng , Chan, Ka , Or, Siu , Ho, Siu , Xu, Wenzheng , Zhang, Xian
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 126637-126647
- Full Text:
- Reviewed:
- Description: Traditional speed control of permanent magnet synchronous motors (PMSMs) includes a cascaded speed loop with proportional-integral (PI) regulators. The output of this outer speed loop, i.e. electromagnetic torque reference, is in turn fed to either the inner current controller or the direct torque controller. This cascaded control structure leads to relatively slow dynamic response, and more importantly, larger speed ripples. This paper presents a new dual cost function model predictive direct speed control (DCF-MPDSC) with duty ratio optimization for PMSM drives. By employing accurate system status prediction, optimized duty ratios between one zero voltage vector and one active voltage vector are firstly deduced based on the deadbeat criterion. Then, two separate cost functions are formulated sequentially to refine the combinations of voltage vectors, which provide two-degree-of-freedom control capability. Specifically, the first cost function results in better dynamic response, while the second one contributes to speed ripple reduction and steady-state offset elimination. The proposed control strategy has been validated by both Simulink simulation and hardware-in-the-loop (HIL) experiment. Compared to existing control methods, the proposed DCF-MPDSC can reach the speed reference rapidly with very small speed ripple and offset. © 2013 IEEE.
- Description: This work was supported in part by the Research Grants Council of the Hong Kong Special Administrative Region (HKSAR) Government under Grant R5020-18, and in part by the Innovation and Technology Commission of the HKSAR Government to the Hong Kong Branch of National Rail Transit Electrification and Automation Engineering Technology Research Center under Grant K-BBY1.
Dual mechanical port machine based hybrid electric vehicle using reduced switch converters
- Bizhani, Hamed, Yao, Gang, Muyeen, S., Islam, Syed, Ben-Brahim, Lazhar
- Authors: Bizhani, Hamed , Yao, Gang , Muyeen, S. , Islam, Syed , Ben-Brahim, Lazhar
- Date: 2019
- Type: Text , Journal article
- Relation: IEEE Access Vol. 7, no. (2019), p. 33665-33676
- Full Text:
- Reviewed:
- Description: Due to the increased environmental pollution, hybrid vehicles have attracted enormous attention in today's society. The two most important factors in designing these vehicles are size and weight. For this purpose, some researchers have presented the use of the dual-mechanical-port machine (DMPM) in hybrid electric vehicles (HEVs). This paper presents two modified converter topologies with a reduced number of switching devices for use on DMPM-based HEVs, with the goal of reducing the overall size and weight of the system. Beside the design of the DMPM in the series-parallel HEV structure along with the energy management unit, the conventional back-to-back (BB) converter is replaced with nine-switch (NS) and five-leg (FL) converters. These converters have never been examined for the DMPM-based HEV, and therefore, the objective of this paper is to reveal the operational characteristics and power flow mechanism of this machine using the NS and FL converters. The simulation analysis is carried out using MATLAB/Simulink considering all HEV operational modes. In addition, two proposed and the conventional converters are compared in terms of losses, maximum achievable voltages, required dc-link voltages, the rating of the components, and torque ripple, and finally, a recommendation is made based on the obtained results.
- Authors: Bizhani, Hamed , Yao, Gang , Muyeen, S. , Islam, Syed , Ben-Brahim, Lazhar
- Date: 2019
- Type: Text , Journal article
- Relation: IEEE Access Vol. 7, no. (2019), p. 33665-33676
- Full Text:
- Reviewed:
- Description: Due to the increased environmental pollution, hybrid vehicles have attracted enormous attention in today's society. The two most important factors in designing these vehicles are size and weight. For this purpose, some researchers have presented the use of the dual-mechanical-port machine (DMPM) in hybrid electric vehicles (HEVs). This paper presents two modified converter topologies with a reduced number of switching devices for use on DMPM-based HEVs, with the goal of reducing the overall size and weight of the system. Beside the design of the DMPM in the series-parallel HEV structure along with the energy management unit, the conventional back-to-back (BB) converter is replaced with nine-switch (NS) and five-leg (FL) converters. These converters have never been examined for the DMPM-based HEV, and therefore, the objective of this paper is to reveal the operational characteristics and power flow mechanism of this machine using the NS and FL converters. The simulation analysis is carried out using MATLAB/Simulink considering all HEV operational modes. In addition, two proposed and the conventional converters are compared in terms of losses, maximum achievable voltages, required dc-link voltages, the rating of the components, and torque ripple, and finally, a recommendation is made based on the obtained results.
Low-power wide-area networks : design goals, architecture, suitability to use cases and research challenges
- Buurman, Ben, Kamruzzaman, Joarder, Karmakar, Gour, Islam, Syed
- Authors: Buurman, Ben , Kamruzzaman, Joarder , Karmakar, Gour , Islam, Syed
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 17179-17220
- Full Text:
- Reviewed:
- Description: Previous survey articles on Low-Powered Wide-Area Networks (LPWANs) lack a systematic analysis of the design goals of LPWAN and the design decisions adopted by various commercially available and emerging LPWAN technologies, and no study has analysed how their design decisions impact their ability to meet design goals. Assessing a technology's ability to meet design goals is essential in determining suitable technologies for a given application. To address these gaps, we have analysed six prominent design goals and identified the design decisions used to meet each goal in the eight LPWAN technologies, ranging from technical consideration to business model, and determined which specific technique in a design decision will help meet each goal to the greatest extent. System architecture and specifications are presented for those LPWAN solutions, and their ability to meet each design goal is evaluated. We outline seventeen use cases across twelve domains that require large low power network infrastructure and prioritise each design goal's importance to those applications as Low, Moderate, or High. Using these priorities and each technology's suitability for meeting design goals, we suggest appropriate LPWAN technologies for each use case. Finally, a number of research challenges are presented for current and future technologies. © 2013 IEEE.
- Authors: Buurman, Ben , Kamruzzaman, Joarder , Karmakar, Gour , Islam, Syed
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 17179-17220
- Full Text:
- Reviewed:
- Description: Previous survey articles on Low-Powered Wide-Area Networks (LPWANs) lack a systematic analysis of the design goals of LPWAN and the design decisions adopted by various commercially available and emerging LPWAN technologies, and no study has analysed how their design decisions impact their ability to meet design goals. Assessing a technology's ability to meet design goals is essential in determining suitable technologies for a given application. To address these gaps, we have analysed six prominent design goals and identified the design decisions used to meet each goal in the eight LPWAN technologies, ranging from technical consideration to business model, and determined which specific technique in a design decision will help meet each goal to the greatest extent. System architecture and specifications are presented for those LPWAN solutions, and their ability to meet each design goal is evaluated. We outline seventeen use cases across twelve domains that require large low power network infrastructure and prioritise each design goal's importance to those applications as Low, Moderate, or High. Using these priorities and each technology's suitability for meeting design goals, we suggest appropriate LPWAN technologies for each use case. Finally, a number of research challenges are presented for current and future technologies. © 2013 IEEE.
A new data driven long-term solar yield analysis model of photovoltaic power plants
- Ray, Biplob, Shah, Rakibuzzaman, Islam, Md Rabiul, Islam, Syed
- Authors: Ray, Biplob , Shah, Rakibuzzaman , Islam, Md Rabiul , Islam, Syed
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 136223-136233
- Full Text:
- Reviewed:
- Description: Historical data offers a wealth of knowledge to the users. However, often restrictively mammoth that the information cannot be fully extracted, synthesized, and analyzed efficiently for an application such as the forecasting of variable generator outputs. Moreover, the accuracy of the prediction method is vital. Therefore, a trade-off between accuracy and efficacy is required for the data-driven energy forecasting method. It has been identified that the hybrid approach may outperform the individual technique in minimizing the error while challenging to synthesize. A hybrid deep learning-based method is proposed for the output prediction of the solar photovoltaic systems (i.e. proposed PV system) in Australia to obtain the trade-off between accuracy and efficacy. The historical dataset from 1990-2013 in Australian locations (e.g. North Queensland) are used to train the model. The model is developed using the combination of multivariate long and short-term memory (LSTM) and convolutional neural network (CNN). The proposed hybrid deep learning (LSTM-CNN) is compared with the existing neural network ensemble (NNE), random forest, statistical analysis, and artificial neural network (ANN) based techniques to assess the performance. The proposed model could be useful for generation planning and reserve estimation in power systems with high penetration of solar photovoltaics (PVs) or other renewable energy sources (RESs). © 2013 IEEE.
- Authors: Ray, Biplob , Shah, Rakibuzzaman , Islam, Md Rabiul , Islam, Syed
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 136223-136233
- Full Text:
- Reviewed:
- Description: Historical data offers a wealth of knowledge to the users. However, often restrictively mammoth that the information cannot be fully extracted, synthesized, and analyzed efficiently for an application such as the forecasting of variable generator outputs. Moreover, the accuracy of the prediction method is vital. Therefore, a trade-off between accuracy and efficacy is required for the data-driven energy forecasting method. It has been identified that the hybrid approach may outperform the individual technique in minimizing the error while challenging to synthesize. A hybrid deep learning-based method is proposed for the output prediction of the solar photovoltaic systems (i.e. proposed PV system) in Australia to obtain the trade-off between accuracy and efficacy. The historical dataset from 1990-2013 in Australian locations (e.g. North Queensland) are used to train the model. The model is developed using the combination of multivariate long and short-term memory (LSTM) and convolutional neural network (CNN). The proposed hybrid deep learning (LSTM-CNN) is compared with the existing neural network ensemble (NNE), random forest, statistical analysis, and artificial neural network (ANN) based techniques to assess the performance. The proposed model could be useful for generation planning and reserve estimation in power systems with high penetration of solar photovoltaics (PVs) or other renewable energy sources (RESs). © 2013 IEEE.
Quantifying success in science : an overview
- Bai, Xiaomei, Pan, Habxiao, Hou, Jie, Guo, Teng, Lee, Ivan, Xia, Feng
- Authors: Bai, Xiaomei , Pan, Habxiao , Hou, Jie , Guo, Teng , Lee, Ivan , Xia, Feng
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 123200-123214
- Full Text:
- Reviewed:
- Description: Quantifying success in science plays a key role in guiding funding allocations, recruitment decisions, and rewards. Recently, a significant amount of progresses have been made towards quantifying success in science. This lack of detailed analysis and summary continues a practical issue. The literature reports the factors influencing scholarly impact and evaluation methods and indices aimed at overcoming this crucial weakness. We focus on categorizing and reviewing the current development on evaluation indices of scholarly impact, including paper impact, scholar impact, and journal impact. Besides, we summarize the issues of existing evaluation methods and indices, investigate the open issues and challenges, and provide possible solutions, including the pattern of collaboration impact, unified evaluation standards, implicit success factor mining, dynamic academic network embedding, and scholarly impact inflation. This paper should help the researchers obtaining a broader understanding of quantifying success in science, and identifying some potential research directions. © 2013 IEEE.
- Description: This work was supported in part by the Liaoning Provincial Key Research and Development Guidance Project under Grant 2018104021, and in part by the Liaoning Provincial Natural Fund Guidance Plan under Grant 20180550011.
- Authors: Bai, Xiaomei , Pan, Habxiao , Hou, Jie , Guo, Teng , Lee, Ivan , Xia, Feng
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 123200-123214
- Full Text:
- Reviewed:
- Description: Quantifying success in science plays a key role in guiding funding allocations, recruitment decisions, and rewards. Recently, a significant amount of progresses have been made towards quantifying success in science. This lack of detailed analysis and summary continues a practical issue. The literature reports the factors influencing scholarly impact and evaluation methods and indices aimed at overcoming this crucial weakness. We focus on categorizing and reviewing the current development on evaluation indices of scholarly impact, including paper impact, scholar impact, and journal impact. Besides, we summarize the issues of existing evaluation methods and indices, investigate the open issues and challenges, and provide possible solutions, including the pattern of collaboration impact, unified evaluation standards, implicit success factor mining, dynamic academic network embedding, and scholarly impact inflation. This paper should help the researchers obtaining a broader understanding of quantifying success in science, and identifying some potential research directions. © 2013 IEEE.
- Description: This work was supported in part by the Liaoning Provincial Key Research and Development Guidance Project under Grant 2018104021, and in part by the Liaoning Provincial Natural Fund Guidance Plan under Grant 20180550011.
An adaptive and flexible brain energized full body exoskeleton with IoT edge for assisting the paralyzed patients
- Jacob, Sunil, Alagirisamy, Mukil, Menon, Varun, Kumar, B. Manoj, Balasubramanian, Venki
- Authors: Jacob, Sunil , Alagirisamy, Mukil , Menon, Varun , Kumar, B. Manoj , Balasubramanian, Venki
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 100721-100731
- Full Text:
- Reviewed:
- Description: The paralyzed population is increasing worldwide due to stroke, spinal code injury, post-polio, and other related diseases. Different assistive technologies are used to improve the physical and mental health of the affected patients. Exoskeletons have emerged as one of the most promising technology to provide movement and rehabilitation for the paralyzed. But exoskeletons are limited by the constraints of weight, flexibility, and adaptability. To resolve these issues, we propose an adaptive and flexible Brain Energized Full Body Exoskeleton (BFBE) for assisting the paralyzed people. This paper describes the design, control, and testing of BFBE with 15 degrees of freedom (DoF) for assisting the users in their daily activities. The flexibility is incorporated into the system by a modular design approach. The brain signals captured by the Electroencephalogram (EEG) sensors are used for controlling the movements of BFBE. The processing happens at the edge, reducing delay in decision making and the system is further integrated with an IoT module that helps to send an alert message to multiple caregivers in case of an emergency. The potential energy harvesting is used in the system to solve the power issues related to the exoskeleton. The stability in the gait cycle is ensured by using adaptive sensory feedback. The system validation is done by using six natural movements on ten different paralyzed persons. The system recognizes human intensions with an accuracy of 85%. The result shows that BFBE can be an efficient method for providing assistance and rehabilitation for paralyzed patients. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramanian” is provided in this record**
- Authors: Jacob, Sunil , Alagirisamy, Mukil , Menon, Varun , Kumar, B. Manoj , Balasubramanian, Venki
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 100721-100731
- Full Text:
- Reviewed:
- Description: The paralyzed population is increasing worldwide due to stroke, spinal code injury, post-polio, and other related diseases. Different assistive technologies are used to improve the physical and mental health of the affected patients. Exoskeletons have emerged as one of the most promising technology to provide movement and rehabilitation for the paralyzed. But exoskeletons are limited by the constraints of weight, flexibility, and adaptability. To resolve these issues, we propose an adaptive and flexible Brain Energized Full Body Exoskeleton (BFBE) for assisting the paralyzed people. This paper describes the design, control, and testing of BFBE with 15 degrees of freedom (DoF) for assisting the users in their daily activities. The flexibility is incorporated into the system by a modular design approach. The brain signals captured by the Electroencephalogram (EEG) sensors are used for controlling the movements of BFBE. The processing happens at the edge, reducing delay in decision making and the system is further integrated with an IoT module that helps to send an alert message to multiple caregivers in case of an emergency. The potential energy harvesting is used in the system to solve the power issues related to the exoskeleton. The stability in the gait cycle is ensured by using adaptive sensory feedback. The system validation is done by using six natural movements on ten different paralyzed persons. The system recognizes human intensions with an accuracy of 85%. The result shows that BFBE can be an efficient method for providing assistance and rehabilitation for paralyzed patients. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramanian” is provided in this record**
AI and IoT-Enabled smart exoskeleton system for rehabilitation of paralyzed people in connected communities
- Jacob, Sunil, Alagirisamy, Mukil, Xi, Chen, Balasubramanian, Venki, Srinivasan, Ram
- Authors: Jacob, Sunil , Alagirisamy, Mukil , Xi, Chen , Balasubramanian, Venki , Srinivasan, Ram
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 80340-80350
- Full Text:
- Reviewed:
- Description: In recent years, the number of cases of spinal cord injuries, stroke and other nervous impairments have led to an increase in the number of paralyzed patients worldwide. Rehabilitation that can aid and enhance the lives of such patients is the need of the hour. Exoskeletons have been found as one of the popular means of rehabilitation. The existing exoskeletons use techniques that impose limitations on adaptability, instant response and continuous control. Also most of them are expensive, bulky, and requires high level of training. To overcome all the above limitations, this paper introduces an Artificial Intelligence (AI) powered Smart and light weight Exoskeleton System (AI-IoT-SES) which receives data from various sensors, classifies them intelligently and generates the desired commands via Internet of Things (IoT) for rendering rehabilitation and support with the help of caretakers for paralyzed patients in smart and connected communities. In the proposed system, the signals collected from the exoskeleton sensors are processed using AI-assisted navigation module, and helps the caretakers in guiding, communicating and controlling the movements of the exoskeleton integrated to the patients. The navigation module uses AI and IoT enabled Simultaneous Localization and Mapping (SLAM). The casualties of a paralyzed person are reduced by commissioning the IoT platform to exchange data from the intelligent sensors with the remote location of the caretaker to monitor the real time movement and navigation of the exoskeleton. The automated exoskeleton detects and take decisions on navigation thereby improving the life conditions of such patients. The experimental results simulated using MATLAB shows that the proposed system is the ideal method for rendering rehabilitation and support for paralyzed patients in smart communities. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramanian” is provided in this record**
- Authors: Jacob, Sunil , Alagirisamy, Mukil , Xi, Chen , Balasubramanian, Venki , Srinivasan, Ram
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 80340-80350
- Full Text:
- Reviewed:
- Description: In recent years, the number of cases of spinal cord injuries, stroke and other nervous impairments have led to an increase in the number of paralyzed patients worldwide. Rehabilitation that can aid and enhance the lives of such patients is the need of the hour. Exoskeletons have been found as one of the popular means of rehabilitation. The existing exoskeletons use techniques that impose limitations on adaptability, instant response and continuous control. Also most of them are expensive, bulky, and requires high level of training. To overcome all the above limitations, this paper introduces an Artificial Intelligence (AI) powered Smart and light weight Exoskeleton System (AI-IoT-SES) which receives data from various sensors, classifies them intelligently and generates the desired commands via Internet of Things (IoT) for rendering rehabilitation and support with the help of caretakers for paralyzed patients in smart and connected communities. In the proposed system, the signals collected from the exoskeleton sensors are processed using AI-assisted navigation module, and helps the caretakers in guiding, communicating and controlling the movements of the exoskeleton integrated to the patients. The navigation module uses AI and IoT enabled Simultaneous Localization and Mapping (SLAM). The casualties of a paralyzed person are reduced by commissioning the IoT platform to exchange data from the intelligent sensors with the remote location of the caretaker to monitor the real time movement and navigation of the exoskeleton. The automated exoskeleton detects and take decisions on navigation thereby improving the life conditions of such patients. The experimental results simulated using MATLAB shows that the proposed system is the ideal method for rendering rehabilitation and support for paralyzed patients in smart communities. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramanian” is provided in this record**
Optimal placement of synchronized voltage traveling wave sensors in a radial distribution network
- Tashakkori, Ali, Abu-Siada, Ahmed, Wolfs, Peter, Islam, Syed
- Authors: Tashakkori, Ali , Abu-Siada, Ahmed , Wolfs, Peter , Islam, Syed
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 65380-65387
- Full Text:
- Reviewed:
- Description: A transmission line fault generates transient high frequency travelling waves (TWs) that propagate through the entire network. The fault location can be determined by recording the instants at which the incident waves arrive at various points in the network. In single end-based methods, the incident wave arrival time and its subsequent reflections from the fault point are used to identify the fault location. In heavily branched distribution networks, the magnitude of the traveling wave declines rapidly as it passes through multiple junctions that cause reflection and refraction to the signal. Therefore, detecting the first incident wave from a high impedance fault is a significant challenge in the electrical distribution networks, in particular, subsequent reflections from a temporarily fault may not be possible. Therefore, to identify a high impedance or temporary faults in a distribution network with many branches, loads, switching devices and distributed transformers, multiple observers are required to observe the entire network. A fully observable and locatable network requires at least one observer per branch or spur which is not a cost effective solution. This paper proposes a reasonable number of relatively low-cost voltage TW observers with GPS time-synchronization and radio communication to detect and timestamp the TW arrival at several points in the network. In this regard, a method to optimally place a given number of TW detectors to maximize the network observability and locatability is presented. Results show the robustness of the proposed method to detect high impedance and intermittent faults within distribution networks with a minimum number of observers. © 2013 IEEE.
- Authors: Tashakkori, Ali , Abu-Siada, Ahmed , Wolfs, Peter , Islam, Syed
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 65380-65387
- Full Text:
- Reviewed:
- Description: A transmission line fault generates transient high frequency travelling waves (TWs) that propagate through the entire network. The fault location can be determined by recording the instants at which the incident waves arrive at various points in the network. In single end-based methods, the incident wave arrival time and its subsequent reflections from the fault point are used to identify the fault location. In heavily branched distribution networks, the magnitude of the traveling wave declines rapidly as it passes through multiple junctions that cause reflection and refraction to the signal. Therefore, detecting the first incident wave from a high impedance fault is a significant challenge in the electrical distribution networks, in particular, subsequent reflections from a temporarily fault may not be possible. Therefore, to identify a high impedance or temporary faults in a distribution network with many branches, loads, switching devices and distributed transformers, multiple observers are required to observe the entire network. A fully observable and locatable network requires at least one observer per branch or spur which is not a cost effective solution. This paper proposes a reasonable number of relatively low-cost voltage TW observers with GPS time-synchronization and radio communication to detect and timestamp the TW arrival at several points in the network. In this regard, a method to optimally place a given number of TW detectors to maximize the network observability and locatability is presented. Results show the robustness of the proposed method to detect high impedance and intermittent faults within distribution networks with a minimum number of observers. © 2013 IEEE.
Examination of effective VAr with respect to dynamic voltage stability in renewable rich power grids
- Alzahrani, Saeed, Shah, Rakibuzzaman, Mithulananthan, N.
- Authors: Alzahrani, Saeed , Shah, Rakibuzzaman , Mithulananthan, N.
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 75494-75508
- Full Text:
- Reviewed:
- Description: High penetrations of inverter-based renewable resources (IBRs) diminish the resilience that traditional power systems had due to constant research and developments for many years. In particular, dynamic voltage stability becomes one of the major concerns for transmission system operators due to the limited capabilities of IBRs (i.e., voltage and frequency regulation). A heavily loaded renewable-rich network is susceptible to fault-induced delayed voltage recovery (FIDVR) due to insufficient effective reactive power (E-VAr) in power grids. Hence, it is crucial to thoroughly scrutinize each VAr resources' participation in E-VAr under various operating conditions. Moreover, it is essential to investigate the influence of E-VAr on system post-fault performance. The E-VAr investigation would help in determining the optimal location and sizing of grid-connected IBRs and allow more renewable energy integration. Furthermore, it would enrich decision-making about adopting additional grid support devices. In this paper, a comprehensive assessment framework is utilized to assess the E-VAr of a power system with a large-scale photovoltaic power. Plant under different realistic operating conditions. Several indices quantifying the contribution of VAr resources and load bus voltage recovery assists to explore the transient response and voltage trajectories. The recovery indices help have a better understanding of the factors affecting E-VAr. The proposed framework has been tested in the New England (IEEE 39 bus system) through simulation by DIgSILENT Power Factory. © 2013 IEEE.
Examination of effective VAr with respect to dynamic voltage stability in renewable rich power grids
- Authors: Alzahrani, Saeed , Shah, Rakibuzzaman , Mithulananthan, N.
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 75494-75508
- Full Text:
- Reviewed:
- Description: High penetrations of inverter-based renewable resources (IBRs) diminish the resilience that traditional power systems had due to constant research and developments for many years. In particular, dynamic voltage stability becomes one of the major concerns for transmission system operators due to the limited capabilities of IBRs (i.e., voltage and frequency regulation). A heavily loaded renewable-rich network is susceptible to fault-induced delayed voltage recovery (FIDVR) due to insufficient effective reactive power (E-VAr) in power grids. Hence, it is crucial to thoroughly scrutinize each VAr resources' participation in E-VAr under various operating conditions. Moreover, it is essential to investigate the influence of E-VAr on system post-fault performance. The E-VAr investigation would help in determining the optimal location and sizing of grid-connected IBRs and allow more renewable energy integration. Furthermore, it would enrich decision-making about adopting additional grid support devices. In this paper, a comprehensive assessment framework is utilized to assess the E-VAr of a power system with a large-scale photovoltaic power. Plant under different realistic operating conditions. Several indices quantifying the contribution of VAr resources and load bus voltage recovery assists to explore the transient response and voltage trajectories. The recovery indices help have a better understanding of the factors affecting E-VAr. The proposed framework has been tested in the New England (IEEE 39 bus system) through simulation by DIgSILENT Power Factory. © 2013 IEEE.
A new global index for short term voltage stability assessment
- Alshareef, Abdulrhman, Shah, Rakibuzzaman, Mithulananthan, Nadarajah, Alzahrani, Saeed
- Authors: Alshareef, Abdulrhman , Shah, Rakibuzzaman , Mithulananthan, Nadarajah , Alzahrani, Saeed
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 36114-36124
- Full Text:
- Reviewed:
- Description: The utility scale of non-conventional generators (NCGs), such as wind and photovoltaic (PV) plants, are competitive alternatives to synchronous machines (SMs) for power generation. Higher penetration of NCGs has been respondent of causing several recent incidents leading up to voltage collapse in power systems due to the distinct characteristics of NCGs under different operating conditions. Consequently, the so-called system strength has been reduced with higher NCGs penetration. A number of indices have been developed to quantify system strength from the short-term voltage stability (STVS) perspective. None of the indices capture the overall performances of power systems on dynamic voltage recovery. In this paper, an improvement in one of the STVS indices namely, the Voltage Recovery Index (VRI), is proposed to overcome shortcomings in the original index. Moreover, the improved index is globalized to establish a new index defined as system voltage recovery index (VRIsys) to quantify STVS at the system level. The amended VRI and developed VRIsys are used in systematic simulations to quantify the impact and interaction of various factors that could affect system strength. The assessment was conducted using time-domain simulation with direct connected induction motors (DCIMs) and a proliferation of converter-based technologies on both the generation and load sides, namely, NCGs and Variable Speed Drives (VSDs), respectively. © 2013 IEEE.
- Authors: Alshareef, Abdulrhman , Shah, Rakibuzzaman , Mithulananthan, Nadarajah , Alzahrani, Saeed
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 36114-36124
- Full Text:
- Reviewed:
- Description: The utility scale of non-conventional generators (NCGs), such as wind and photovoltaic (PV) plants, are competitive alternatives to synchronous machines (SMs) for power generation. Higher penetration of NCGs has been respondent of causing several recent incidents leading up to voltage collapse in power systems due to the distinct characteristics of NCGs under different operating conditions. Consequently, the so-called system strength has been reduced with higher NCGs penetration. A number of indices have been developed to quantify system strength from the short-term voltage stability (STVS) perspective. None of the indices capture the overall performances of power systems on dynamic voltage recovery. In this paper, an improvement in one of the STVS indices namely, the Voltage Recovery Index (VRI), is proposed to overcome shortcomings in the original index. Moreover, the improved index is globalized to establish a new index defined as system voltage recovery index (VRIsys) to quantify STVS at the system level. The amended VRI and developed VRIsys are used in systematic simulations to quantify the impact and interaction of various factors that could affect system strength. The assessment was conducted using time-domain simulation with direct connected induction motors (DCIMs) and a proliferation of converter-based technologies on both the generation and load sides, namely, NCGs and Variable Speed Drives (VSDs), respectively. © 2013 IEEE.
A secured framework for SDN-based edge computing in IoT-enabled healthcare system
- Li, Junxia, Cai, Jinjin, Khan, Fazlullah, Rehman, Ateeq, Balasubramanian, Venki
- Authors: Li, Junxia , Cai, Jinjin , Khan, Fazlullah , Rehman, Ateeq , Balasubramanian, Venki
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 135479-135490
- Full Text:
- Reviewed:
- Description: The Internet of Things (IoT) consists of resource-constrained smart devices capable to sense and process data. It connects a huge number of smart sensing devices, i.e., things, and heterogeneous networks. The IoT is incorporated into different applications, such as smart health, smart home, smart grid, etc. The concept of smart healthcare has emerged in different countries, where pilot projects of healthcare facilities are analyzed. In IoT-enabled healthcare systems, the security of IoT devices and associated data is very important, whereas Edge computing is a promising architecture that solves their computational and processing problems. Edge computing is economical and has the potential to provide low latency data services by improving the communication and computation speed of IoT devices in a healthcare system. In Edge-based IoT-enabled healthcare systems, load balancing, network optimization, and efficient resource utilization are accurately performed using artificial intelligence (AI), i.e., intelligent software-defined network (SDN) controller. SDN-based Edge computing is helpful in the efficient utilization of limited resources of IoT devices. However, these low powered devices and associated data (private sensitive data of patients) are prone to various security threats. Therefore, in this paper, we design a secure framework for SDN-based Edge computing in IoT-enabled healthcare system. In the proposed framework, the IoT devices are authenticated by the Edge servers using a lightweight authentication scheme. After authentication, these devices collect data from the patients and send them to the Edge servers for storage, processing, and analyses. The Edge servers are connected with an SDN controller, which performs load balancing, network optimization, and efficient resource utilization in the healthcare system. The proposed framework is evaluated using computer-based simulations. The results demonstrate that the proposed framework provides better solutions for IoT-enabled healthcare systems. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramaniam” is provided in this record**
- Authors: Li, Junxia , Cai, Jinjin , Khan, Fazlullah , Rehman, Ateeq , Balasubramanian, Venki
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 135479-135490
- Full Text:
- Reviewed:
- Description: The Internet of Things (IoT) consists of resource-constrained smart devices capable to sense and process data. It connects a huge number of smart sensing devices, i.e., things, and heterogeneous networks. The IoT is incorporated into different applications, such as smart health, smart home, smart grid, etc. The concept of smart healthcare has emerged in different countries, where pilot projects of healthcare facilities are analyzed. In IoT-enabled healthcare systems, the security of IoT devices and associated data is very important, whereas Edge computing is a promising architecture that solves their computational and processing problems. Edge computing is economical and has the potential to provide low latency data services by improving the communication and computation speed of IoT devices in a healthcare system. In Edge-based IoT-enabled healthcare systems, load balancing, network optimization, and efficient resource utilization are accurately performed using artificial intelligence (AI), i.e., intelligent software-defined network (SDN) controller. SDN-based Edge computing is helpful in the efficient utilization of limited resources of IoT devices. However, these low powered devices and associated data (private sensitive data of patients) are prone to various security threats. Therefore, in this paper, we design a secure framework for SDN-based Edge computing in IoT-enabled healthcare system. In the proposed framework, the IoT devices are authenticated by the Edge servers using a lightweight authentication scheme. After authentication, these devices collect data from the patients and send them to the Edge servers for storage, processing, and analyses. The Edge servers are connected with an SDN controller, which performs load balancing, network optimization, and efficient resource utilization in the healthcare system. The proposed framework is evaluated using computer-based simulations. The results demonstrate that the proposed framework provides better solutions for IoT-enabled healthcare systems. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramaniam” is provided in this record**
A Survey on Behavioral Pattern Mining from Sensor Data in Internet of Things
- Rashid, Md Mamunur, Kamruzzaman, Joarder, Hassan, Mohammad, Shahriar Shafin, Sakib, Bhuiyan, Md Zakirul
- Authors: Rashid, Md Mamunur , Kamruzzaman, Joarder , Hassan, Mohammad , Shahriar Shafin, Sakib , Bhuiyan, Md Zakirul
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 33318-33341
- Full Text:
- Reviewed:
- Description: The deployment of large-scale wireless sensor networks (WSNs) for the Internet of Things (IoT) applications is increasing day-by-day, especially with the emergence of smart city services. The sensor data streams generated from these applications are largely dynamic, heterogeneous, and often geographically distributed over large areas. For high-value use in business, industry and services, these data streams must be mined to extract insightful knowledge, such as about monitoring (e.g., discovering certain behaviors over a deployed area) or network diagnostics (e.g., predicting faulty sensor nodes). However, due to the inherent constraints of sensor networks and application requirements, traditional data mining techniques cannot be directly used to mine IoT data streams efficiently and accurately in real-time. In the last decade, a number of works have been reported in the literature proposing behavioral pattern mining algorithms for sensor networks. This paper presents the technical challenges that need to be considered for mining sensor data. It then provides a thorough review of the mining techniques proposed in the recent literature to mine behavioral patterns from sensor data in IoT, and their characteristics and differences are highlighted and compared. We also propose a behavioral pattern mining framework for IoT and discuss possible future research directions in this area. © 2013 IEEE.
- Authors: Rashid, Md Mamunur , Kamruzzaman, Joarder , Hassan, Mohammad , Shahriar Shafin, Sakib , Bhuiyan, Md Zakirul
- Date: 2020
- Type: Text , Journal article
- Relation: IEEE Access Vol. 8, no. (2020), p. 33318-33341
- Full Text:
- Reviewed:
- Description: The deployment of large-scale wireless sensor networks (WSNs) for the Internet of Things (IoT) applications is increasing day-by-day, especially with the emergence of smart city services. The sensor data streams generated from these applications are largely dynamic, heterogeneous, and often geographically distributed over large areas. For high-value use in business, industry and services, these data streams must be mined to extract insightful knowledge, such as about monitoring (e.g., discovering certain behaviors over a deployed area) or network diagnostics (e.g., predicting faulty sensor nodes). However, due to the inherent constraints of sensor networks and application requirements, traditional data mining techniques cannot be directly used to mine IoT data streams efficiently and accurately in real-time. In the last decade, a number of works have been reported in the literature proposing behavioral pattern mining algorithms for sensor networks. This paper presents the technical challenges that need to be considered for mining sensor data. It then provides a thorough review of the mining techniques proposed in the recent literature to mine behavioral patterns from sensor data in IoT, and their characteristics and differences are highlighted and compared. We also propose a behavioral pattern mining framework for IoT and discuss possible future research directions in this area. © 2013 IEEE.
Rock-burst occurrence prediction based on optimized naïve bayes models
- Ke, Bo, Khandelwal, Manoj, Asteris, Panagiotis, Skentou, Athanasia, Mamou, Anna, Armaghani, Danial
- Authors: Ke, Bo , Khandelwal, Manoj , Asteris, Panagiotis , Skentou, Athanasia , Mamou, Anna , Armaghani, Danial
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 91347-91360
- Full Text:
- Reviewed:
- Description: Rock-burst is a common failure in hard rock related projects in civil and mining construction and therefore, proper classification and prediction of this phenomenon is of interest. This research presents the development of optimized naïve Bayes models, in predicting rock-burst failures in underground projects. The naïve Bayes models were optimized using four weight optimization techniques including forward, backward, particle swarm optimization, and evolutionary. An evolutionary random forest model was developed to identify the most significant input parameters. The maximum tangential stress, elastic energy index, and uniaxial tensile stress were then selected by the feature selection technique (i.e., evolutionary random forest) to develop the optimized naïve Bayes models. The performance of the models was assessed using various criteria as well as a simple ranking system. The results of this research showed that particle swarm optimization was the most effective technique in improving the accuracy of the naïve Bayes model for rock-burst prediction (cumulative ranking = 21), while the backward technique was the worst weight optimization technique (cumulative ranking = 11). All the optimized naïve Bayes models identified the maximum tangential stress as the most significant parameter in predicting rock-burst failures. The results of this research demonstrate that particle swarm optimization technique may improve the accuracy of naïve Bayes algorithms in predicting rock-burst occurrence. © 2013 IEEE.
- Authors: Ke, Bo , Khandelwal, Manoj , Asteris, Panagiotis , Skentou, Athanasia , Mamou, Anna , Armaghani, Danial
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 91347-91360
- Full Text:
- Reviewed:
- Description: Rock-burst is a common failure in hard rock related projects in civil and mining construction and therefore, proper classification and prediction of this phenomenon is of interest. This research presents the development of optimized naïve Bayes models, in predicting rock-burst failures in underground projects. The naïve Bayes models were optimized using four weight optimization techniques including forward, backward, particle swarm optimization, and evolutionary. An evolutionary random forest model was developed to identify the most significant input parameters. The maximum tangential stress, elastic energy index, and uniaxial tensile stress were then selected by the feature selection technique (i.e., evolutionary random forest) to develop the optimized naïve Bayes models. The performance of the models was assessed using various criteria as well as a simple ranking system. The results of this research showed that particle swarm optimization was the most effective technique in improving the accuracy of the naïve Bayes model for rock-burst prediction (cumulative ranking = 21), while the backward technique was the worst weight optimization technique (cumulative ranking = 11). All the optimized naïve Bayes models identified the maximum tangential stress as the most significant parameter in predicting rock-burst failures. The results of this research demonstrate that particle swarm optimization technique may improve the accuracy of naïve Bayes algorithms in predicting rock-burst occurrence. © 2013 IEEE.
Forced oscillation in power systems with converter controlled-based resources- a survey with case studies
- Surinkaew, Tossaporn, Emami, Koanoush, Shah, Rakibuzzaman, Islam, Syed, Mithulananthan, N.
- Authors: Surinkaew, Tossaporn , Emami, Koanoush , Shah, Rakibuzzaman , Islam, Syed , Mithulananthan, N.
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 150911-150924
- Full Text:
- Reviewed:
- Description: In future power systems, conventional synchronous generators will be replaced by converter controlled-based generations (CCGs), i.e., wind and solar generations, and battery energy storage systems. Thus, the paradigm shift in power systems will lead to the inferior system strength and inertia scarcity. Therefore, the problems of forced oscillation (FO) will emerge with new features of the CCGs. The state-of-the-art review in this paper emphasizes previous strategies for FO detection, source identification, and mitigation. Moreover, the effect of FO is investigated in a power system with CCGs. In its conclusion, this paper also highlights important findings and provides suggestions for subsequent research in this important topic of future power systems. © 2013 IEEE.
- Authors: Surinkaew, Tossaporn , Emami, Koanoush , Shah, Rakibuzzaman , Islam, Syed , Mithulananthan, N.
- Date: 2021
- Type: Text , Journal article
- Relation: IEEE Access Vol. 9, no. (2021), p. 150911-150924
- Full Text:
- Reviewed:
- Description: In future power systems, conventional synchronous generators will be replaced by converter controlled-based generations (CCGs), i.e., wind and solar generations, and battery energy storage systems. Thus, the paradigm shift in power systems will lead to the inferior system strength and inertia scarcity. Therefore, the problems of forced oscillation (FO) will emerge with new features of the CCGs. The state-of-the-art review in this paper emphasizes previous strategies for FO detection, source identification, and mitigation. Moreover, the effect of FO is investigated in a power system with CCGs. In its conclusion, this paper also highlights important findings and provides suggestions for subsequent research in this important topic of future power systems. © 2013 IEEE.