Context aware vertical soft handoff algorithm for heterogeneous wireless networks
- Authors: Yang, Kemeng , Gondal, Iqbal , Qiu, Bin
- Date: 2008
- Type: Text , Conference paper
- Relation: Proceedings of the 68th IEEE Vehicular Technology Conference p. 1266-1270
- Full Text: false
- Reviewed:
- Description: Soft handoff in WCDMA systems allows multi connection between the user and base stations during handoff, in contrast to single connection in hard handoff. But multi connection flexibility leads to a trade-off between quality of service for the user and the system downlink capacity. The heterogeneous wireless networks consist of WCDMA and WLAN systems, which operate at different frequency with no direct interference. Therefore, a vertical soft handoff between downlink shared channels from WCDMA and WLAN will not suffer similar side effects as the horizontal soft handoff in WCDMA systems. In this paper, we present an analytical framework for vertical soft handoff and propose a context-aware vertical soft handoff algorithm (CAVSH) for heterogeneous wireless networks. CAVSH considers four user and system context parameters such as user required bandwidth, user traffic cost, access network utilization, and signal to interference-and-noise ratio (SINR). The results show that the proposed CAVSH can provide the system with lower dropping probability, lower average cost to the user and higher throughput, as compared with vertical hard handoff.
A cross-layer approach for using multiple radio channels with directional beams in a suburban Ad Hoc network
- Authors: Rokonuzzaman, S. K. , Pose, Ronald , Gondal, Iqbal
- Date: 2008
- Type: Text , Conference paper
- Relation: Australasian Telecommunication Networks and Applications Conference
- Full Text: false
- Reviewed:
- Description: The capacity of wireless ad hoc networks can be increased by using multiple radio channels. But due to interference the capacity is still not fully utilized. This is caused by the limited number of available radio channels. The interference problem can be reduced using directional beams instead of omni-directional beams. This paper presents a novel cross-layer approach to use multiple radio channels with directional antennas. We are using three different radio channels. Each node has three fixed directional beams having fixed beamwidth and with different radio frequency. Two nodes can communicate when both the sending and receiving beams are pointing towards each other using the same frequency channel. In this study the directions of beams cannot be changed dynamically. A modified version of Ad hoc On-demand Distance Vector (AODV) routing protocol has been used. Simulation results show that our approach outperforms other methods using three different radio channels with omni-directional antennas
A cross-layer approach for QoS topology control in wireless ad hoc networks
- Authors: Rokonuzzaman, S. K. , Pose, Ronald , Gondal, Iqbal
- Date: 2009
- Type: Text , Conference paper
- Relation: TENCON 2009 - 2009 IEEE Region 10 Conference
- Full Text:
- Reviewed:
- Description: Wireless ad hoc networks using omni-directional antennas do not scale well due to interference between nearby nodes. Maintaining the QoS of the communications in this type of network is a difficult task. Using multiple narrow beam directional antennas alleviates this problem at the expense of connectivity. Multi-beam smart antennas allow the network topology to be adjusted dynamically by adjusting the beamwidth and beam directions to minimize interference and to maximize the number of possible concurrent network communications. This in turn helps to maintain the QoS of the communications. QoS routing has long been used to meet the user requirements by finding appropriate paths to the destinations. We extend this concept to create an adaptive QoS topology control (AQTC) system using smart antennas. We use a cross-layer approach to control the topology dynamically where the topology control layer sits between the MAC and the routing protocol. The performance of our protocol has been evaluated using extensive simulations. Simulation results show that different topologies for a set of communications perform differently. AQTC always forms a topology to facilitate the current communications and improves the network throughput and end-to-end delay.