A new building mask using the gradient of heights for automatic building extraction
- Siddiqui, Fasahat, Awrangjeb, Mohammad, Teng, Shyh, Lu, Guojun
- Authors: Siddiqui, Fasahat , Awrangjeb, Mohammad , Teng, Shyh , Lu, Guojun
- Date: 2016
- Type: Text , Conference proceedings
- Relation: 2016 International Conference on Digital Image Computing: Techniques and Applications (Dicta); Gold Coast, Australia; 30th November-2nd December 2016 p. 288-294
- Full Text:
- Reviewed:
- Description: A number of building detection methods have been proposed in the literature. However, they are not effective in detecting small buildings (typically, 50 m(2)) and buildings with transparent roof due to the way area thresholds and ground points are used. This paper proposes a new building mask to overcome these limitations and enables detection of buildings not only with transparent roof materials but also which are small in size. The proposed building detection method transforms the non-ground height information into an intensity image and then analyses the gradient information in the image. It uses a small area threshold of 1 m2 and, thereby, is able to detect small buildings such as garden sheds. The use of non-ground points allows analyses of the gradient on all types of roof materials and, thus, the method is also able to detect buildings with transparent roofs. Our experimental results show that the proposed method can successfully extract buildings even when their roofs are small and/or transparent, thereby, achieving relatively higher average completeness and quality.
- Authors: Siddiqui, Fasahat , Awrangjeb, Mohammad , Teng, Shyh , Lu, Guojun
- Date: 2016
- Type: Text , Conference proceedings
- Relation: 2016 International Conference on Digital Image Computing: Techniques and Applications (Dicta); Gold Coast, Australia; 30th November-2nd December 2016 p. 288-294
- Full Text:
- Reviewed:
- Description: A number of building detection methods have been proposed in the literature. However, they are not effective in detecting small buildings (typically, 50 m(2)) and buildings with transparent roof due to the way area thresholds and ground points are used. This paper proposes a new building mask to overcome these limitations and enables detection of buildings not only with transparent roof materials but also which are small in size. The proposed building detection method transforms the non-ground height information into an intensity image and then analyses the gradient information in the image. It uses a small area threshold of 1 m2 and, thereby, is able to detect small buildings such as garden sheds. The use of non-ground points allows analyses of the gradient on all types of roof materials and, thus, the method is also able to detect buildings with transparent roofs. Our experimental results show that the proposed method can successfully extract buildings even when their roofs are small and/or transparent, thereby, achieving relatively higher average completeness and quality.
Building change detection from LIDAR point cloud data based on connected component analysis
- Awrangjeb, Mohammad, Fraser, Clive, Lu, Guojun
- Authors: Awrangjeb, Mohammad , Fraser, Clive , Lu, Guojun
- Date: 2015
- Type: Text , Conference proceedings
- Relation: Isprs Geospatial Week 2015; La Grande Motte, France; 28th September-3rd October 2015; published in International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences Vol. II-3, p. 393-400
- Full Text:
- Reviewed:
- Description: Building data are one of the important data types in a topographic database. Building change detection after a period of time is necessary for many applications, such as identification of informal settlements. Based on the detected changes, the database has to be updated to ensure its usefulness. This paper proposes an improved building detection technique, which is a prerequisite for many building change detection techniques. The improved technique examines the gap between neighbouring buildings in the building mask in order to avoid under segmentation errors. Then, a new building change detection technique from LIDAR point cloud data is proposed. Buildings which are totally new or demolished are directly added to the change detection output. However, for demolished or extended building parts, a connected component analysis algorithm is applied and for each connected component its area, width and height are estimated in order to ascertain if it can be considered as a demolished or new building part. Finally, a graphical user interface (GUI) has been developed to update detected changes to the existing building map. Experimental results show that the improved building detection technique can offer not only higher performance in terms of completeness and correctness, but also a lower number of under-segmentation errors as compared to its original counterpart. The proposed change detection technique produces no omission errors and thus it can be exploited for enhanced automated building information updating within a topographic database. Using the developed GUI, the user can quickly examine each suggested change and indicate his/her decision with a minimum number of mouse clicks.
- Authors: Awrangjeb, Mohammad , Fraser, Clive , Lu, Guojun
- Date: 2015
- Type: Text , Conference proceedings
- Relation: Isprs Geospatial Week 2015; La Grande Motte, France; 28th September-3rd October 2015; published in International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences Vol. II-3, p. 393-400
- Full Text:
- Reviewed:
- Description: Building data are one of the important data types in a topographic database. Building change detection after a period of time is necessary for many applications, such as identification of informal settlements. Based on the detected changes, the database has to be updated to ensure its usefulness. This paper proposes an improved building detection technique, which is a prerequisite for many building change detection techniques. The improved technique examines the gap between neighbouring buildings in the building mask in order to avoid under segmentation errors. Then, a new building change detection technique from LIDAR point cloud data is proposed. Buildings which are totally new or demolished are directly added to the change detection output. However, for demolished or extended building parts, a connected component analysis algorithm is applied and for each connected component its area, width and height are estimated in order to ascertain if it can be considered as a demolished or new building part. Finally, a graphical user interface (GUI) has been developed to update detected changes to the existing building map. Experimental results show that the improved building detection technique can offer not only higher performance in terms of completeness and correctness, but also a lower number of under-segmentation errors as compared to its original counterpart. The proposed change detection technique produces no omission errors and thus it can be exploited for enhanced automated building information updating within a topographic database. Using the developed GUI, the user can quickly examine each suggested change and indicate his/her decision with a minimum number of mouse clicks.
- «
- ‹
- 1
- ›
- »