- Jayasundera, Mithila, Adhikari, Benu, Howes, Tony, Aldred, Peter
- Authors: Jayasundera, Mithila , Adhikari, Benu , Howes, Tony , Aldred, Peter
- Date: 2011
- Type: Text , Journal article
- Relation: Food Chemistry Vol. 128, no. 4 (2011), p. 1003-1016
- Full Text: false
- Reviewed:
- Description: We have investigated the amount of protein required to produce amorphous sugar powders through spray-drying. Pea protein isolate was used as a model plant protein and sodium caseinate was used as a model dairy protein. Powder recovery in a laboratory spray dryer was used as a measure of the ease of spray drying for a given formulation. More than 80% of amorphous sucrose and fructose was produced with the addition of sodium caseinate, while the pea protein isolate was able to produce only recoveries of less than 50% of amorphous sucrose. Sensitivity of low molecular weight surfactants has been demonstrated using both ionic (sodium stearoyl lactylate) and non-ionic (polysorbate-80) surfactants. Spray-dried powders were subjected to physico-chemical characterisation and dissolution experiments. The maximum solubility of all powders was obtained after 5 min of dissolution. The solubility of the sodium caseinate increased by 6-7% in the presence of fructose and low molecular weight surfactants. The solubility of the amorphous powders of sucrose-pea protein isolate was found to be lower than amorphous powders of sucrose-sodium caseinate and fructose-sodium caseinate. The addition of sucrose in water increased the solubility of the pea protein isolate from 16.84% to more than 83%. The non-ionic surfactant (Tween-80) has reduced the solubility of sucrose-pea protein isolate-Tween-80 powders significantly (p < 0.05) compared to those of sucrose-pea protein isolate-sodium stearoyl lactylate powders. The solubility of sucrose-sodium caseinate powders was comparable to that of pure sodium caseinate, indicating that addition of sucrose into 0.13% sodium caseinate does not have any significant effect on the solubility of this protein at this concentration. © 2011 Elsevier Ltd. All rights reserved.
- Jayasundera, Mithila, Adhikari, Benu, Adhikari, Raju, Aldred, Peter
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2011
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 104, no. 2 (2011), p. 259-271
- Full Text: false
- Reviewed:
- Description: The effects of proteins and low molecular weight surfactants (LMS) on spray drying and powder characteristics of model sugar-rich foods have been studied. Fructose and sucrose were selected as model sugar-rich foods and sodium caseinate (NaCas) was selected as a model protein. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic low molecular weight surfactants. The feed solutions for spray drying had 25% solid concentration in all. To achieve identical powder recoveries of the order of 80% much higher NaCas:fructose ratio (30:70) was required compared to NaCas:sucrose ratio (0.5:99.5) which corresponded to 7.89% and 0.13% of sodium caseinate (initial bulk concentration), respectively. There was no change in powder recovery when the SSL concentration was increased from 0.01% to 0.05% in fructose-NaCas-SSL solution and also addition of 0.01% Tween-80 into fructose-NaCas solution did not affect the powder recovery (76.7 ± 2.3%), however, it was slightly affected with the increase of Tween-80 to 0.05% (69.0 ± 1.9%). At NaCas concentration above critical micelle concentration of NaCas (3% w/w), the presence of up to 0.05% low molecular weight surfactants had either no effect or minimal effect on the surface coverage of the droplets/particles and also on the powder recovery depending on the nature of the low molecular weight surfactants. The surface protein coverage and the recovery of the powder in sucrose-protein systems were very sensitive in the presence of low molecular weight surfactants due to being below the critical micelle concentration of NaCas. SSL displaced 2.0% and 29.3% of proteins from the droplet surface of sucrose-NaCas-SSL, respectively, when its concentration was varied from 0.01% to 0.05% thereby reducing the powder recovery from 75.5% to 30%. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount of NaCas from the droplet surface and no powder was recovered. These phenomena are explained on the basis of surface-glass transition temperature, dynamic surface tension, nature of surfactants and glass transition temperature of sugars used. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas, sucrose-NaCas with 0.01% SSL and all powders of fructose were amorphous. © 2010 Elsevier Ltd. All rights reserved.
The effect of protein types and low molecular weight surfactants on spray drying of sugar-rich foods
- Jayasundera, Mithila, Adhikari, Benu, Adhikari, Raju, Aldred, Peter
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2010
- Type: Text , Journal article
- Relation: Food Hydrocolloids Vol. 25, no. 3 (2010), p. 459-469
- Full Text:
- Reviewed:
- Description: The effect of protein types and low molecular weight surfactants (LMS) on spray drying of sugar-rich foods has been studied using sucrose as a model sugar and sodium caseinate (NaCas) and pea protein isolate (PPI) as model proteins. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic LMS. The sucrose:NaCas and sucrose:PPI solid ratios were maintained at (99.5:0.5) and (99:1), respectively and spray-dried maintaining 25% solids in feed solutions. It was found that the proteins preferentially migrated to the air-water interface reasonably swiftly and the addition of LMS resulted into partial or complete displacement of the proteins from the air-water interface. More than 80% of amorphous sucrose powder was produced with the addition of 0.13% (w/w) of NaCas in feed solution. PPI was not as effective and produced less than 50% recovery even at 0.26% (w/w) in feed. Addition of 0.01-0.05% SSL displaced 2.0% and 29.3% of proteins from the surface of sucrose-NaCas-SSL droplet, respectively, resulting in a 6.5 ± 1.2% to 51.9 ± 1.9% reduction in powder recovery. The extent of protein displacement was higher when SSL was added into sucrose-PPI solution; however, the powder recovery was not much affected. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount or all the NaCas from the droplet surface and no powder was recovered. The addition of 0.01% and 0.05% Tween-80 into sucrose-PPI solution resulted into very low powder recoveries (24.9 ± 0.4% and 29.5 ± 1.8%, respectively). The glass transition temperature (Tg) results revealed that the amount of protein required for successful spray drying of sucrose-protein solutions depends on the amount of proteins present on the droplet surface but not on the bulk concentration. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas/PPI and sucrose-NaCas/PPI with 0.01% SSL were mostly amorphous while those with sucrose-NaCas/PPI-Tween-80 (0.01%), sucrose-PPI-Tween-80 (0.05%) and sucrose-NaCas/PPI-SSL (0.05%) were crystalline. © 2010 Elsevier Ltd. All rights reserved.
The effect of protein types and low molecular weight surfactants on spray drying of sugar-rich foods
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2010
- Type: Text , Journal article
- Relation: Food Hydrocolloids Vol. 25, no. 3 (2010), p. 459-469
- Full Text:
- Reviewed:
- Description: The effect of protein types and low molecular weight surfactants (LMS) on spray drying of sugar-rich foods has been studied using sucrose as a model sugar and sodium caseinate (NaCas) and pea protein isolate (PPI) as model proteins. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic LMS. The sucrose:NaCas and sucrose:PPI solid ratios were maintained at (99.5:0.5) and (99:1), respectively and spray-dried maintaining 25% solids in feed solutions. It was found that the proteins preferentially migrated to the air-water interface reasonably swiftly and the addition of LMS resulted into partial or complete displacement of the proteins from the air-water interface. More than 80% of amorphous sucrose powder was produced with the addition of 0.13% (w/w) of NaCas in feed solution. PPI was not as effective and produced less than 50% recovery even at 0.26% (w/w) in feed. Addition of 0.01-0.05% SSL displaced 2.0% and 29.3% of proteins from the surface of sucrose-NaCas-SSL droplet, respectively, resulting in a 6.5 ± 1.2% to 51.9 ± 1.9% reduction in powder recovery. The extent of protein displacement was higher when SSL was added into sucrose-PPI solution; however, the powder recovery was not much affected. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount or all the NaCas from the droplet surface and no powder was recovered. The addition of 0.01% and 0.05% Tween-80 into sucrose-PPI solution resulted into very low powder recoveries (24.9 ± 0.4% and 29.5 ± 1.8%, respectively). The glass transition temperature (Tg) results revealed that the amount of protein required for successful spray drying of sucrose-protein solutions depends on the amount of proteins present on the droplet surface but not on the bulk concentration. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas/PPI and sucrose-NaCas/PPI with 0.01% SSL were mostly amorphous while those with sucrose-NaCas/PPI-Tween-80 (0.01%), sucrose-PPI-Tween-80 (0.05%) and sucrose-NaCas/PPI-SSL (0.05%) were crystalline. © 2010 Elsevier Ltd. All rights reserved.
The effect of low molecular weight surfactants and proteins on surface stickiness of sucrose during powder formation through spray drying
- Adhikari, Benu, Howes, Tony, Wood, B. J., Bhandari, Bhesh
- Authors: Adhikari, Benu , Howes, Tony , Wood, B. J. , Bhandari, Bhesh
- Date: 2009
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 94, no. 2 (2009), p. 135 -143
- Full Text:
- Reviewed:
- Description: The effect of competitive surface migration of proteins and low molecular weight surfactants (LMS) on the powder recovery in spray drying of highly sticky sugar-rich food has been studied. Sucrose was chosen as a model sugar-rich food because it cannot be easily converted into a pure amorphous powder through spray drying. Sodium caseinate (Na-C) and hydrolyzed whey protein isolate (WPI) were used as model proteins. Polysorbate 80 (Tween-80) and sodium dodecyl sulfate (Na-DS) were used as model non-ionic and ionic LMS. A sucrose solution was spray dried without any additives to establish a base case. Following this, spray drying trials of sucrose-protein solutions were conducted. The sucrose: protein ratio was maintained at 99.5:0.5 and 99.0:1.0. Finally, 0.05% of Tween-80 and Na-DS, on a nominal feed basis, were individually added to the solutions and spray dried. The solid concentration of all of the feed solutions was set at 25% and the inlet and outlet temperatures were maintained at 170 °C and 70 °C, respectively. Powder recovery was determined using a standard procedure and taken as an indicator of the surface stickiness. Coverage of the particle surface by the proteins was determined through elemental surface analysis and a nitrogen balance. It was found that in the absence of LMS, the proteins covered up to 55% of the particle surface and increased the powder recovery to between 84% and 85%. Formation of a glassy protein-rich film acts to reduce the surface stickiness of sucrose droplets. However, when LMS was added to the sucrose-protein solutions, the recovery dropped to zero in the case of Tween-80. In the case of Na-DS the recoveries ranged to 39% and 68%. At these recoveries 83% and 59% of the protein, respectively, was displaced from the surface. This drastic effect of surfactant types on the powder recovery is explained using the Orogenic Displacement model. © 2009 Elsevier Ltd. All rights reserved.
- Authors: Adhikari, Benu , Howes, Tony , Wood, B. J. , Bhandari, Bhesh
- Date: 2009
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 94, no. 2 (2009), p. 135 -143
- Full Text:
- Reviewed:
- Description: The effect of competitive surface migration of proteins and low molecular weight surfactants (LMS) on the powder recovery in spray drying of highly sticky sugar-rich food has been studied. Sucrose was chosen as a model sugar-rich food because it cannot be easily converted into a pure amorphous powder through spray drying. Sodium caseinate (Na-C) and hydrolyzed whey protein isolate (WPI) were used as model proteins. Polysorbate 80 (Tween-80) and sodium dodecyl sulfate (Na-DS) were used as model non-ionic and ionic LMS. A sucrose solution was spray dried without any additives to establish a base case. Following this, spray drying trials of sucrose-protein solutions were conducted. The sucrose: protein ratio was maintained at 99.5:0.5 and 99.0:1.0. Finally, 0.05% of Tween-80 and Na-DS, on a nominal feed basis, were individually added to the solutions and spray dried. The solid concentration of all of the feed solutions was set at 25% and the inlet and outlet temperatures were maintained at 170 °C and 70 °C, respectively. Powder recovery was determined using a standard procedure and taken as an indicator of the surface stickiness. Coverage of the particle surface by the proteins was determined through elemental surface analysis and a nitrogen balance. It was found that in the absence of LMS, the proteins covered up to 55% of the particle surface and increased the powder recovery to between 84% and 85%. Formation of a glassy protein-rich film acts to reduce the surface stickiness of sucrose droplets. However, when LMS was added to the sucrose-protein solutions, the recovery dropped to zero in the case of Tween-80. In the case of Na-DS the recoveries ranged to 39% and 68%. At these recoveries 83% and 59% of the protein, respectively, was displaced from the surface. This drastic effect of surfactant types on the powder recovery is explained using the Orogenic Displacement model. © 2009 Elsevier Ltd. All rights reserved.
- «
- ‹
- 1
- ›
- »