Complex coacervation between flaxseed protein isolate and flaxseed gum
- Kaushik, Pratibha, Dowling, Kim, Barrow, Colin, Adhikari, Benu
- Authors: Kaushik, Pratibha , Dowling, Kim , Barrow, Colin , Adhikari, Benu
- Date: 2015
- Type: Text , Journal article
- Relation: Food Research International Vol. 72, no. (2015), p. 91-97
- Full Text:
- Reviewed:
- Description:
Flaxseed protein isolate (FPI) and flaxseed gum (FG) were extracted, and the electrostatic complexation between these two biopolymers was studied as a function of pH and FPI-to-FG ratio using turbidimetric and electrophoretic mobility (zeta potential) tests. The zeta potential values of FPI, FG, and their mixtures at the FPI-to-FG ratios of 1:1, 3:1, 5:1, 10:1, 15:1 were measured over a pH range 8.0-1.5. The alteration of the secondary structure of FPI as a function of pH was studied using circular dichroism. The proportion of a-helical structure decreased, whereas both β-sheet structure and random coil structure increased with the lowering of pH from 8.0 to 3.0. The acidic pH affected the secondary structure of FPI and the unfolding of helix conformation facilitated the complexation of FPI with FG. The optimum FPI-to-FG ratio for complex coacervation was found to be 3:1. The critical pH values associated with the formation of soluble (pHc) and insoluble (pH
Φ1 ) complexes at the optimum FPI-to-FG ratio were found to be 6.0 and 4.5, respectively. The optimum pH (pHopt ) for the optimum complex coacervation was 3.1. The instability and dissolution of FPI-FG complex coacervates started (pHΦ2 ) at pH2.1. These findings contribute to the development of FPI-FG complex coacervates as delivery vehicles for unstable albeit valuable nutrients such as omega-3 fatty acids. © 2015.
- Authors: Kaushik, Pratibha , Dowling, Kim , Barrow, Colin , Adhikari, Benu
- Date: 2015
- Type: Text , Journal article
- Relation: Food Research International Vol. 72, no. (2015), p. 91-97
- Full Text:
- Reviewed:
- Description:
Flaxseed protein isolate (FPI) and flaxseed gum (FG) were extracted, and the electrostatic complexation between these two biopolymers was studied as a function of pH and FPI-to-FG ratio using turbidimetric and electrophoretic mobility (zeta potential) tests. The zeta potential values of FPI, FG, and their mixtures at the FPI-to-FG ratios of 1:1, 3:1, 5:1, 10:1, 15:1 were measured over a pH range 8.0-1.5. The alteration of the secondary structure of FPI as a function of pH was studied using circular dichroism. The proportion of a-helical structure decreased, whereas both β-sheet structure and random coil structure increased with the lowering of pH from 8.0 to 3.0. The acidic pH affected the secondary structure of FPI and the unfolding of helix conformation facilitated the complexation of FPI with FG. The optimum FPI-to-FG ratio for complex coacervation was found to be 3:1. The critical pH values associated with the formation of soluble (pHc) and insoluble (pH
Φ1 ) complexes at the optimum FPI-to-FG ratio were found to be 6.0 and 4.5, respectively. The optimum pH (pHopt ) for the optimum complex coacervation was 3.1. The instability and dissolution of FPI-FG complex coacervates started (pHΦ2 ) at pH2.1. These findings contribute to the development of FPI-FG complex coacervates as delivery vehicles for unstable albeit valuable nutrients such as omega-3 fatty acids. © 2015.
Effect of spatial distribution of wax and PEG-isocyanate on the morphology and hydrophobicity of starch films
- Muscat, Delina, Adhikari, Raju, Tobin, Mark, McKnight, Stafford, Wakeling, Lara, Adhikari, Benu
- Authors: Muscat, Delina , Adhikari, Raju , Tobin, Mark , McKnight, Stafford , Wakeling, Lara , Adhikari, Benu
- Date: 2014
- Type: Text , Journal article
- Relation: Carbohydrate Polymers Vol. 111, no. (2014), p. 333-347
- Full Text:
- Reviewed:
- Description: This study proposes a novel method for improving surface hydrophobicity of glycerol plasticized high amylose (HAG) films. We used polyethylene glycol isocyanate (PEG-iso) crosslinker to link HAG and three natural waxes (beeswax, candelilla wax and carnauba wax) to produce HAG + wax + PEG-iso films. The spatial distributions of wax and PEG-iso across the thickness of these films were determined using Synchrotron-based Fourier transform infrared spectroscopy. The hydrophobicity and surface morphology of the films were determined using contact angle (CA) and scanning electron microscopic measurements, respectively. The distribution patterns of wax and the PEG-iso across the thickness of the film, and the nature of crystalline patterns formed on the surface of these films were found to be the key factors affecting surface hydrophobicity. The highest hydrophobicity (CA >90°) was created when the PEG-iso was primarily distributed in the interior of the films and a hierarchical circular pinnacle structure of solidified wax was formed on the surface. © 2014 Elsevier Ltd.
- Authors: Muscat, Delina , Adhikari, Raju , Tobin, Mark , McKnight, Stafford , Wakeling, Lara , Adhikari, Benu
- Date: 2014
- Type: Text , Journal article
- Relation: Carbohydrate Polymers Vol. 111, no. (2014), p. 333-347
- Full Text:
- Reviewed:
- Description: This study proposes a novel method for improving surface hydrophobicity of glycerol plasticized high amylose (HAG) films. We used polyethylene glycol isocyanate (PEG-iso) crosslinker to link HAG and three natural waxes (beeswax, candelilla wax and carnauba wax) to produce HAG + wax + PEG-iso films. The spatial distributions of wax and PEG-iso across the thickness of these films were determined using Synchrotron-based Fourier transform infrared spectroscopy. The hydrophobicity and surface morphology of the films were determined using contact angle (CA) and scanning electron microscopic measurements, respectively. The distribution patterns of wax and the PEG-iso across the thickness of the film, and the nature of crystalline patterns formed on the surface of these films were found to be the key factors affecting surface hydrophobicity. The highest hydrophobicity (CA >90°) was created when the PEG-iso was primarily distributed in the interior of the films and a hierarchical circular pinnacle structure of solidified wax was formed on the surface. © 2014 Elsevier Ltd.
Survival, fermentation activity and storage stability of spray dried Lactococcus lactis produced via different atomization regimes
- Ghandi, Amir, Powell, Ian, Broome, Melcolm, Adhikari, Benu
- Authors: Ghandi, Amir , Powell, Ian , Broome, Melcolm , Adhikari, Benu
- Date: 2013
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 115, no. 1 (2013), p. 83-90
- Full Text:
- Reviewed:
- Description: Dried powders containing Lactococcus lactis ssp. cremoris were produced using laboratory and pilot scale spray dryers with lactose:whey protein isolate (3:1) as a protective medium. The effects of storage temperature (25, 4 and -18 °C) and time (30, 60 and 90 days) were studied. The survival and fermentation activity of the dried bacterial cells were significantly lower when the powders were stored at 25 °C compared to those stored at 4 and -18 °C; powders stored at 4 and -18 °C were statistically similar. The survival and fermentation activity of bacterial cells obtained from a laboratory scale two-fluid nozzle spray dryer were found to be higher than those of cells obtained from a pilot scale two-fluid spray dryer. A rotary wheel atomizer gave significantly higher survival and activity in the same dryer. These observations are consistent with cell damage due to high characteristic shear rates in the atomization process in nozzle type atomizers. The presence of ascorbic acid (oxygen scavenger) in the powder composition was found to improve both the survival and the maintenance of fermentation activity of the dried bacterial cells significantly during storage. The survival and fermentation activity of dried bacterial cells in stored powders indicated that these parameters are system-specific and can be strongly affected by the storage temperature and presence or absence of antioxidant, and also by upstream processing conditions such as the mode of atomization and presence or absence of antioxidants in the dryer feed. © 2012 Elsevier Ltd. All rights reserved.
- Description: 2003010581
- Authors: Ghandi, Amir , Powell, Ian , Broome, Melcolm , Adhikari, Benu
- Date: 2013
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 115, no. 1 (2013), p. 83-90
- Full Text:
- Reviewed:
- Description: Dried powders containing Lactococcus lactis ssp. cremoris were produced using laboratory and pilot scale spray dryers with lactose:whey protein isolate (3:1) as a protective medium. The effects of storage temperature (25, 4 and -18 °C) and time (30, 60 and 90 days) were studied. The survival and fermentation activity of the dried bacterial cells were significantly lower when the powders were stored at 25 °C compared to those stored at 4 and -18 °C; powders stored at 4 and -18 °C were statistically similar. The survival and fermentation activity of bacterial cells obtained from a laboratory scale two-fluid nozzle spray dryer were found to be higher than those of cells obtained from a pilot scale two-fluid spray dryer. A rotary wheel atomizer gave significantly higher survival and activity in the same dryer. These observations are consistent with cell damage due to high characteristic shear rates in the atomization process in nozzle type atomizers. The presence of ascorbic acid (oxygen scavenger) in the powder composition was found to improve both the survival and the maintenance of fermentation activity of the dried bacterial cells significantly during storage. The survival and fermentation activity of dried bacterial cells in stored powders indicated that these parameters are system-specific and can be strongly affected by the storage temperature and presence or absence of antioxidant, and also by upstream processing conditions such as the mode of atomization and presence or absence of antioxidants in the dryer feed. © 2012 Elsevier Ltd. All rights reserved.
- Description: 2003010581
Effect of shear rate and oxygen stresses on the survival of Lactococcus lactis during the atomization and drying stages of spray drying : A laboratory and pilot scale study
- Ghandi, Amir, Powell, Ian, Howes, Tony, Chen, Xiao Dong, Adhikari, Benu
- Authors: Ghandi, Amir , Powell, Ian , Howes, Tony , Chen, Xiao Dong , Adhikari, Benu
- Date: 2012
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 113, no. 2 (2012), p. 194-200
- Full Text:
- Reviewed:
- Description: The effect of shear rate and oxygen injury during atomization and the combination of these factors on the survival of Lactococcus lactis subsp. cremoris in spray drying was studied using laboratory and pilot scale spray dryers. The atomization was carried out using a two-fluid nozzle in the laboratory study and a two-fluid nozzle or rotary atomizer in the pilot scale study. The extent of oxygen-induced death was determined using ascorbic acid in the feed and atomizing the feed with gaseous nitrogen. The lowest levels of bacterial death were observed at lowest characteristic shear rate and in the presence of nitrogen and ascorbic acid. Quantitative analysis showed that lower shear rate, creating an oxygen-limiting environment during atomization and drying, and using oxygen scavengers in the feed were successful in enhancing bacterial survival in spray drying. We also report for the first time that, at least for L. lactis, the extent of death during the atomization stage far outweighs death during the drying stage, and that the majority of bacterial death (up to 93%) occurs during the atomization stage. The death of bacteria was found to be less when using a rotary atomizer or when using a two-fluid nozzle atomizer at lower flow rate. This work shows that bacterial death during spray drying can be minimized by using oxygen scavengers such as ascorbic acid and/or an anaerobic atomizing medium (such as nitrogen), and by altering the spraying conditions. © 2012 Elsevier Ltd. All rights reserved.
- Authors: Ghandi, Amir , Powell, Ian , Howes, Tony , Chen, Xiao Dong , Adhikari, Benu
- Date: 2012
- Type: Text , Journal article
- Relation: Journal of Food Engineering Vol. 113, no. 2 (2012), p. 194-200
- Full Text:
- Reviewed:
- Description: The effect of shear rate and oxygen injury during atomization and the combination of these factors on the survival of Lactococcus lactis subsp. cremoris in spray drying was studied using laboratory and pilot scale spray dryers. The atomization was carried out using a two-fluid nozzle in the laboratory study and a two-fluid nozzle or rotary atomizer in the pilot scale study. The extent of oxygen-induced death was determined using ascorbic acid in the feed and atomizing the feed with gaseous nitrogen. The lowest levels of bacterial death were observed at lowest characteristic shear rate and in the presence of nitrogen and ascorbic acid. Quantitative analysis showed that lower shear rate, creating an oxygen-limiting environment during atomization and drying, and using oxygen scavengers in the feed were successful in enhancing bacterial survival in spray drying. We also report for the first time that, at least for L. lactis, the extent of death during the atomization stage far outweighs death during the drying stage, and that the majority of bacterial death (up to 93%) occurs during the atomization stage. The death of bacteria was found to be less when using a rotary atomizer or when using a two-fluid nozzle atomizer at lower flow rate. This work shows that bacterial death during spray drying can be minimized by using oxygen scavengers such as ascorbic acid and/or an anaerobic atomizing medium (such as nitrogen), and by altering the spraying conditions. © 2012 Elsevier Ltd. All rights reserved.
The effect of protein types and low molecular weight surfactants on spray drying of sugar-rich foods
- Jayasundera, Mithila, Adhikari, Benu, Adhikari, Raju, Aldred, Peter
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2010
- Type: Text , Journal article
- Relation: Food Hydrocolloids Vol. 25, no. 3 (2010), p. 459-469
- Full Text:
- Reviewed:
- Description: The effect of protein types and low molecular weight surfactants (LMS) on spray drying of sugar-rich foods has been studied using sucrose as a model sugar and sodium caseinate (NaCas) and pea protein isolate (PPI) as model proteins. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic LMS. The sucrose:NaCas and sucrose:PPI solid ratios were maintained at (99.5:0.5) and (99:1), respectively and spray-dried maintaining 25% solids in feed solutions. It was found that the proteins preferentially migrated to the air-water interface reasonably swiftly and the addition of LMS resulted into partial or complete displacement of the proteins from the air-water interface. More than 80% of amorphous sucrose powder was produced with the addition of 0.13% (w/w) of NaCas in feed solution. PPI was not as effective and produced less than 50% recovery even at 0.26% (w/w) in feed. Addition of 0.01-0.05% SSL displaced 2.0% and 29.3% of proteins from the surface of sucrose-NaCas-SSL droplet, respectively, resulting in a 6.5 ± 1.2% to 51.9 ± 1.9% reduction in powder recovery. The extent of protein displacement was higher when SSL was added into sucrose-PPI solution; however, the powder recovery was not much affected. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount or all the NaCas from the droplet surface and no powder was recovered. The addition of 0.01% and 0.05% Tween-80 into sucrose-PPI solution resulted into very low powder recoveries (24.9 ± 0.4% and 29.5 ± 1.8%, respectively). The glass transition temperature (Tg) results revealed that the amount of protein required for successful spray drying of sucrose-protein solutions depends on the amount of proteins present on the droplet surface but not on the bulk concentration. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas/PPI and sucrose-NaCas/PPI with 0.01% SSL were mostly amorphous while those with sucrose-NaCas/PPI-Tween-80 (0.01%), sucrose-PPI-Tween-80 (0.05%) and sucrose-NaCas/PPI-SSL (0.05%) were crystalline. © 2010 Elsevier Ltd. All rights reserved.
The effect of protein types and low molecular weight surfactants on spray drying of sugar-rich foods
- Authors: Jayasundera, Mithila , Adhikari, Benu , Adhikari, Raju , Aldred, Peter
- Date: 2010
- Type: Text , Journal article
- Relation: Food Hydrocolloids Vol. 25, no. 3 (2010), p. 459-469
- Full Text:
- Reviewed:
- Description: The effect of protein types and low molecular weight surfactants (LMS) on spray drying of sugar-rich foods has been studied using sucrose as a model sugar and sodium caseinate (NaCas) and pea protein isolate (PPI) as model proteins. Sodium stearoyl lactylate (SSL) and Polysorbate 80 (Tween-80) were chosen as model ionic and non-ionic LMS. The sucrose:NaCas and sucrose:PPI solid ratios were maintained at (99.5:0.5) and (99:1), respectively and spray-dried maintaining 25% solids in feed solutions. It was found that the proteins preferentially migrated to the air-water interface reasonably swiftly and the addition of LMS resulted into partial or complete displacement of the proteins from the air-water interface. More than 80% of amorphous sucrose powder was produced with the addition of 0.13% (w/w) of NaCas in feed solution. PPI was not as effective and produced less than 50% recovery even at 0.26% (w/w) in feed. Addition of 0.01-0.05% SSL displaced 2.0% and 29.3% of proteins from the surface of sucrose-NaCas-SSL droplet, respectively, resulting in a 6.5 ± 1.2% to 51.9 ± 1.9% reduction in powder recovery. The extent of protein displacement was higher when SSL was added into sucrose-PPI solution; however, the powder recovery was not much affected. The addition of 0.01% Tween-80 in sucrose-NaCas solution resulted in a 48.2 ± 1.5% reduction in powder recovery and at 0.05% concentration, it displaced a substantial amount or all the NaCas from the droplet surface and no powder was recovered. The addition of 0.01% and 0.05% Tween-80 into sucrose-PPI solution resulted into very low powder recoveries (24.9 ± 0.4% and 29.5 ± 1.8%, respectively). The glass transition temperature (Tg) results revealed that the amount of protein required for successful spray drying of sucrose-protein solutions depends on the amount of proteins present on the droplet surface but not on the bulk concentration. X-ray diffraction and scanning electron microscopy results showed that the powders of sucrose-NaCas/PPI and sucrose-NaCas/PPI with 0.01% SSL were mostly amorphous while those with sucrose-NaCas/PPI-Tween-80 (0.01%), sucrose-PPI-Tween-80 (0.05%) and sucrose-NaCas/PPI-SSL (0.05%) were crystalline. © 2010 Elsevier Ltd. All rights reserved.
- «
- ‹
- 1
- ›
- »