Description:
Omega-3 fatty acids and probiotic bacteria were co-encapsulated in a single whey protein isolate (WPI)-gum Arabic (GA) complex coacervate microcapsule. Tuna oil (0) and Lactobacillus casei 431 (P) were used as models of omega-3 and probiotic bacteria, respectively. The co-microcapsules (WPI-P-O-GA) and L. casei containing microcapsules (WPI-P-GA) were converted into powder by using spray and freeze drying. The viability of L. casei was significantly higher in WPI-P-O-GA co-microcapsules than in WPI-P-GA. The oxidative stability of tuna oil was significantly higher in spray dried co-capsules than in freeze dried ones. Crown Copyright (C) 2015 Published by Elsevier Ltd. All rights reserved.
Description:
The extent and nature of denaturation of whey protein isolate (WPI) in convective air drying environments was measured and analysed using single droplet drying. A custom-built, single droplet drying instrument was used for this purpose. Single droplets having 5. ±. 0.1. μl volume (initial droplet diameter 1.5. ±. 0.1. mm) containing 10% (w/v) WPI were dried at air temperatures of 45, 65 and 80. °C for 600. s at constant air velocity of 0.5. m/s. The extent and nature of denaturation of WPI in isothermal heat treatment processes was measured at 65 and 80. °C for 600. s and compared with those obtained from convective air drying. The extent of denaturation of WPI in a high hydrostatic pressure environment (600. MPa for 600. s) was also determined. The results showed that at the end of 600. s of convective drying at 65. °C the denaturation of WPI was 68.3%, while it was only 10.8% during isothermal heat treatment at the same medium temperature. When the medium temperature was maintained at 80. °C, the denaturation loss of WPI was 90.0% and 68.7% during isothermal heat treatment and convective drying, respectively. The bovine serum albumin (BSA) fraction of WPI was found to be more stable in the convective drying conditions than
Description:
Tuna oil rich in omega-3 fatty acids was microencapsulated in whey protein isolate (WPI)–gum arabic (GA) complex coacervates, and subsequently dried using spray and freeze drying to produce solid microcapsules. The oxidative stability, oil microencapsulation efficiency, surface oil and morphology of these solid microcapsules were determined. The complex coacervation process between WPI and GA was optimised in terms of pH, and WPI-to-GA ratio, using zeta potential, turbidity, and morphology of the microcapsules. The optimum pH and WPI-to-GA ratio for complex coacervation was found to be 3.75 and 3 : 1, respectively. The spray dried solid microcapsules had better stability against oxidation, higher oil microencapsulation efficiency and lower surface oil content compared to the freeze dried microcapsules. The surface of the spray dried microcapsules did not show microscopic pores while the surface of the freeze dried microcapsules was more porous. This study suggests that solid microcapsules of omega-3 rich oils can be produced using WPI–GA complex coacervates followed by spray drying and these microcapsules can be quite stable against oxidation. These microcapsules can have many potential applications in the functional food and nutraceuticals industry.
Description:
Flaxseed protein isolate (FPI) was extracted from flaxseeds, and its amino acid composition and functional properties (solubility, thermal stability, emulsifying properties and electrostatic charge density, water holding and fat absorption capacities) were determined. The highest purity of FPI (90.6%) was achieved by extraction at 60°C. FPI had a low lysine to arginine ratio of 0.25, which is desired in heart-healthy foods and infant formulas. The denaturation temperature of FPI was 105°C. FPI had the highest emulsion activity index (375.51m2/g), highest emulsion stability index (179.5h) and zeta potential (−67.4mV) when compared to those of other commonly used proteins, such as sodium caseinate (SC), whey protein isolate (WPI), gelatin (Gel) and soy protein isolate (SPI). The average emulsion droplet size of emulsions stabilized by these proteins was in the order SC
Description:
The objective of the study was to determine optimum inlet and outlet air temperatures of spray process for producing co-microcapsules containing omega-3 rich tuna oil and probiotic bacteria L. casei. These co-microcapsules were produced using whey protein isolate and gum Arabic complex coacervates as shell materials. Improved bacterial viability and oxidative stability of omega-3 oil were used as two main criteria of this study. Three sets of inlet (130 degrees C, 150 degrees C, and 170 degrees C) and outlet (55 degrees C, 65 degrees C, and 75 degrees C) air temperatures were used in nine combinations to produce powdered co-microcapsule. The viability of L. casei, oxidative stability of omega-3 oil, surface oil, oil microencapsulation efficiency, moisture content, surface elemental composition and morphology of the powdered samples were measured. There is no statistical difference in oxidative stability at two lower inlet air temperatures (130 degrees C and 150 degrees C). However, there was a significant decrease in oxidative stability when higher inlet temperature (170 degrees C) was used. The viability of L. casei decreased with the increase in the inlet and outlet air temperatures. There was no difference in the surface elemental compositions and surface morphology of powdered co-microcapsules produced under these nine inlet/outlet temperature combinations. Of the range of conditions tested the co-microcapsules produced at inlet-outlet temperature 130-65 degrees C showed the highest bacterial viability and oxidative stability of omega-3 and having the moisture content of 4.93 +/- 0.05% (w/w). This research shows that powdered co-microcapsules of probiotic bacteria and omega-3 fatty acids with high survival of the former and high stability against oxidation can be produced through spray drying.
Description:
The objective of the study was to determine optimum inlet and outlet air temperatures of spray process for producing co-microcapsules containing omega-3 rich tuna oil and probiotic bacteria L. casei. These co-microcapsules were produced using whey protein isolate and gum Arabic complex coacervates as shell materials. Improved bacterial viability and oxidative stability of omega-3 oil were used as two main criteria of this study. Three sets of inlet (130 degrees C, 150 degrees C, and 170 degrees C) and outlet (55 degrees C, 65 degrees C, and 75 degrees C) air temperatures were used in nine combinations to produce powdered co-microcapsule. The viability of L. casei, oxidative stability of omega-3 oil, surface oil, oil microencapsulation efficiency, moisture content, surface elemental composition and morphology of the powdered samples were measured. There is no statistical difference in oxidative stability at two lower inlet air temperatures (130 degrees C and 150 degrees C). However, there was a significant decrease in oxidative stability when higher inlet temperature (170 degrees C) was used. The viability of L. casei decreased with the increase in the inlet and outlet air temperatures. There was no difference in the surface elemental compositions and surface morphology of powdered co-microcapsules produced under these nine inlet/outlet temperature combinations. Of the range of conditions tested the co-microcapsules produced at inlet-outlet temperature 130-65 degrees C showed the highest bacterial viability and oxidative stability of omega-3 and having the moisture content of 4.93 +/- 0.05% (w/w). This research shows that powdered co-microcapsules of probiotic bacteria and omega-3 fatty acids with high survival of the former and high stability against oxidation can be produced through spray drying.