Wifi-based localisation datasets for No-GPS open areas using smart bins

Wed 29 Sep 2021 17:39:17 AEST

In recent years, Wifi-based localisation systems have gained significant interest because of the lack of Global Positioning System (GPS) signal in indoor and certain open areas. Over the past decade, many datasets have been introduced to enable researchers to compare different localisation techniques. Existing datasets, however, have failed to cover open areas such as parks in cases where GPS is still unavailable, and there is a lack of Wifi access points. Also, the existing datasets only focus on getting Wifi fingerprint collected and labelled by users. To the best of our knowledge, no dataset provides Received Signal Strengths (RSS) collected by Wireless Access Points (APs). In this work, we offer two datasets publicly. The first is the Fingerprint dataset in which four users generated 16,032 accurate and consistently labelled WiFi fingerprints for all available Reference Points (RPs) in a central and busy area of Murdoch University, known as Bush Court. The second is the APs dataset that includes 2,450,865 auto-generated records received from 1000 users' devices, including the four users, associated with Wifi signal strengths. To overcome the Wifi coverage problem for the Bush Court, we attached our previously designed Wireless Sensor Nodes (WSNs) to existing garbage bins, enabling them to provide real-time environmental sensing and act as soft APs that sense MAC addresses and Wifi signals from surrounding devices.

iPod therefore I can : Enhancing the learning of children with intellectual disabilities through emerging technologies

Wed 28 Apr 2021 12:38:31 AEST

This paper explores the pedagogical and social potential of emerging technologies, in particular the iPod, in facilitating the learning of young Australians with severe intellectual and social disabilities. The study, which was carried out in a segregated educational setting in Victoria, Australia, sought to establish whether the intrinsic portable, multi-media capabilities of the iPod particularly lent themselves to a practical application for students with severe disabilities. It was concluded that such new technology has considerable power and potential as an emerging pedagogy with students with severe intellectual and physical disabilities.

The knowledge management functions of corporate university and their evolution: case studies of two Chinese corporate universities

Wed 17 Aug 2022 12:24:26 AEST

Purpose The purpose of this paper is to investigate the knowledge management functions of corporate universities and their evolution. Design/methodology/approach Two Chinese corporate universities in the ICT industry were selected for the case studies. Data were collected by interviews and consulting the documents of the two corporate universities. Grounded theory was used for data analysis. Findings The research found that the knowledge management functions of the corporate universities encompass knowledge transfer, knowledge creation and knowledge services for intrapreneurship. The knowledge management functions of the corporate universities are enhancing with the development of the corporate universities. The knowledge management functions mutually reinforce each other. The knowledge network of the corporate universities is expanding and the scope of knowledge managed is broadening. Originality/value Analyzing the knowledge management functions of corporate universities and their evolution from the perspective of knowledge network enriches research on knowledge management of corporate universities.

A new data driven long-term solar yield analysis model of photovoltaic power plants

Wed 07 Apr 2021 14:02:49 AEST

Historical data offers a wealth of knowledge to the users. However, often restrictively mammoth that the information cannot be fully extracted, synthesized, and analyzed efficiently for an application such as the forecasting of variable generator outputs. Moreover, the accuracy of the prediction method is vital. Therefore, a trade-off between accuracy and efficacy is required for the data-driven energy forecasting method. It has been identified that the hybrid approach may outperform the individual technique in minimizing the error while challenging to synthesize. A hybrid deep learning-based method is proposed for the output prediction of the solar photovoltaic systems (i.e. proposed PV system) in Australia to obtain the trade-off between accuracy and efficacy. The historical dataset from 1990-2013 in Australian locations (e.g. North Queensland) are used to train the model. The model is developed using the combination of multivariate long and short-term memory (LSTM) and convolutional neural network (CNN). The proposed hybrid deep learning (LSTM-CNN) is compared with the existing neural network ensemble (NNE), random forest, statistical analysis, and artificial neural network (ANN) based techniques to assess the performance. The proposed model could be useful for generation planning and reserve estimation in power systems with high penetration of solar photovoltaics (PVs) or other renewable energy sources (RESs). © 2013 IEEE.

Dual cost function model predictive direct speed control with duty ratio optimization for PMSM drives

Wed 07 Apr 2021 14:02:49 AEST

Traditional speed control of permanent magnet synchronous motors (PMSMs) includes a cascaded speed loop with proportional-integral (PI) regulators. The output of this outer speed loop, i.e. electromagnetic torque reference, is in turn fed to either the inner current controller or the direct torque controller. This cascaded control structure leads to relatively slow dynamic response, and more importantly, larger speed ripples. This paper presents a new dual cost function model predictive direct speed control (DCF-MPDSC) with duty ratio optimization for PMSM drives. By employing accurate system status prediction, optimized duty ratios between one zero voltage vector and one active voltage vector are firstly deduced based on the deadbeat criterion. Then, two separate cost functions are formulated sequentially to refine the combinations of voltage vectors, which provide two-degree-of-freedom control capability. Specifically, the first cost function results in better dynamic response, while the second one contributes to speed ripple reduction and steady-state offset elimination. The proposed control strategy has been validated by both Simulink simulation and hardware-in-the-loop (HIL) experiment. Compared to existing control methods, the proposed DCF-MPDSC can reach the speed reference rapidly with very small speed ripple and offset. © 2013 IEEE.

Quantifying success in science : an overview

Wed 07 Apr 2021 14:02:47 AEST

Quantifying success in science plays a key role in guiding funding allocations, recruitment decisions, and rewards. Recently, a significant amount of progresses have been made towards quantifying success in science. This lack of detailed analysis and summary continues a practical issue. The literature reports the factors influencing scholarly impact and evaluation methods and indices aimed at overcoming this crucial weakness. We focus on categorizing and reviewing the current development on evaluation indices of scholarly impact, including paper impact, scholar impact, and journal impact. Besides, we summarize the issues of existing evaluation methods and indices, investigate the open issues and challenges, and provide possible solutions, including the pattern of collaboration impact, unified evaluation standards, implicit success factor mining, dynamic academic network embedding, and scholarly impact inflation. This paper should help the researchers obtaining a broader understanding of quantifying success in science, and identifying some potential research directions. © 2013 IEEE.

A low-complexity equalizer for video broadcasting in cyber-physical social systems through handheld mobile devices

Wed 07 Apr 2021 14:02:35 AEST

In Digital Video Broadcasting-Handheld (DVB-H) devices for cyber-physical social systems, the Discrete Fractional Fourier Transform-Orthogonal Chirp Division Multiplexing (DFrFT-OCDM) has been suggested to enhance the performance over Orthogonal Frequency Division Multiplexing (OFDM) systems under time and frequency-selective fading channels. In this case, the need for equalizers like the Minimum Mean Square Error (MMSE) and Zero-Forcing (ZF) arises, though it is excessively complex due to the need for a matrix inversion, especially for DVB-H extensive symbol lengths. In this work, a low complexity equalizer, Least-Squares Minimal Residual (LSMR) algorithm, is used to solve the matrix inversion iteratively. The paper proposes the LSMR algorithm for linear and nonlinear equalizers with the simulation results, which indicate that the proposed equalizer has significant performance and reduced complexity over the classical MMSE equalizer and other low complexity equalizers, in time and frequency-selective fading channels. © 2013 IEEE.

Associations between comorbid stress and internet gaming disorder symptoms : are there cultural and gender variations?

Wed 07 Apr 2021 14:02:33 AEST

Introduction: The American Psychiatric Association has requested additional studies examine risk, protective, and cultural factors in relation to Internet Gaming Disorder (IGD). The present study aimed to explore the association between stress as a potential IGD risk effect, the possible exacerbating role of cultural orientation (vertical individualism [VI]), and how this may vary between genders. Methods: The sample included adult gamers from the USA, UK, and Australia. Analyses were conducted via linear regression, moderation, and moderated moderation. Results: The results suggested that higher stress symptoms act to increase IGD risk. Gender and VI also influenced this association. Discussion: Males presenting with higher levels of stress and VI were at greater risk of IGD compared to females who exhibited a reduction in IGD-related behaviors. This demonstrates a need for more research to determine how culture and gender can act to mitigate or worsen the risks associated with excessive gaming. © 2020 John Wiley & Sons Australia, Ltd

Robust malware defense in industrial IoT applications using machine learning with selective adversarial samples

Wed 07 Apr 2021 14:02:28 AEST

Industrial Internet of Things (IIoT) deploys edge devices to act as intermediaries between sensors and actuators and application servers or cloud services. Machine learning models have been widely used to thwart malware attacks in such edge devices. However, these models are vulnerable to adversarial attacks where attackers craft adversarial samples by introducing small perturbations to malware samples to fool a classifier to misclassify them as benign applications. Literature on deep learning networks proposes adversarial retraining as a defense mechanism where adversarial samples are combined with legitimate samples to retrain the classifier. However, existing works select such adversarial samples in a random fashion which degrades the classifier's performance. This work proposes two novel approaches for selecting adversarial samples to retrain a classifier. One, based on the distance from malware cluster center, and the other, based on a probability measure derived from a kernel based learning (KBL). Our experiments show that both of our sample selection methods outperform the random selection method and the KBL selection method improves detection accuracy by 6%. Also, while existing works focus on deep neural networks with respect to adversarial retraining, we additionally assess the impact of such adversarial samples on other classifiers and our proposed selective adversarial retraining approaches show similar performance improvement for these classifiers as well. The outcomes from the study can assist in designing robust security systems for IIoT applications.

An enhancement to the spatial pyramid matching for image classification and retrieval

Wed 07 Apr 2021 14:02:28 AEST

Spatial pyramid matching (SPM) is one of the widely used methods to incorporate spatial information into the image representation. Despite its effectiveness, the traditional SPM is not rotation invariant. A rotation invariant SPM has been proposed in the literature but it has many limitations regarding the effectiveness. In this paper, we investigate how to make SPM robust to rotation by addressing those limitations. In an SPM framework, an image is divided into an increasing number of partitions at different pyramid levels. In this paper, our main focus is on how to partition images in such a way that the resulting structure can deal with image-level rotations. To do that, we investigate three concentric ring partitioning schemes. Apart from image partitioning, another important component of the SPM framework is a weight function. To apportion the contribution of each pyramid level to the final matching between two images, the weight function is needed. In this paper, we propose a new weight function which is suitable for the rotation-invariant SPM structure. Experiments based on image classification and retrieval are performed on five image databases. The detailed result analysis shows that we are successful in enhancing the effectiveness of SPM for image classification and retrieval. © 2013 IEEE.

Low-power wide-area networks : design goals, architecture, suitability to use cases and research challenges

Wed 07 Apr 2021 14:02:28 AEST

Previous survey articles on Low-Powered Wide-Area Networks (LPWANs) lack a systematic analysis of the design goals of LPWAN and the design decisions adopted by various commercially available and emerging LPWAN technologies, and no study has analysed how their design decisions impact their ability to meet design goals. Assessing a technology's ability to meet design goals is essential in determining suitable technologies for a given application. To address these gaps, we have analysed six prominent design goals and identified the design decisions used to meet each goal in the eight LPWAN technologies, ranging from technical consideration to business model, and determined which specific technique in a design decision will help meet each goal to the greatest extent. System architecture and specifications are presented for those LPWAN solutions, and their ability to meet each design goal is evaluated. We outline seventeen use cases across twelve domains that require large low power network infrastructure and prioritise each design goal's importance to those applications as Low, Moderate, or High. Using these priorities and each technology's suitability for meeting design goals, we suggest appropriate LPWAN technologies for each use case. Finally, a number of research challenges are presented for current and future technologies. © 2013 IEEE.

Mapping the cumulative impacts of long-term mining disturbance and progressive rehabilitation on ecosystem services

Wed 07 Apr 2021 14:02:27 AEST

Open-cut coal mining can seriously disturb and reshape natural landscapes which results in a range of impacts on local ecosystems and the services they provide. To address the negative impacts of disturbance, progressive rehabilitation is commonly advocated. However, there is little research focusing on how these impacts affect ecosystem services within mine sites and changes over time. The aim of this study was to assess the cumulative impacts of mining disturbance and rehabilitation on ecosystem services through mapping and quantifying changes at multiple spatial and temporal scales. Four ecosystem services including carbon sequestration, air quality regulation, soil conservation and water yield were assessed in 1989, 1997, 2005 and 2013. Disturbance and rehabilitation was mapped using LandTrendr algorithm with Landsat. We mapped spatial patterns and pixel values for each ecosystem service with corresponding model and the landscape changes were analyzed with landscape metrics. In addition, we assessed synergies and trade-offs using Spearman's correlation coefficient for different landscape classes and scales. The results showed that carbon sequestration, air quality regulation and water yield services were both positively and negatively affected by vegetation cover changes due to mined land disturbance and rehabilitation, while soil conservation service were mainly influenced by topographic changes. There were strong interactions between carbon sequestration, air quality regulation and water yield, which were steady among different spatial scales and landscape types. Soil conservation correlations were weak and changed substantially due to differences of spatial scales and landscape types. Although there are limitations associated with data accessibility, this study provides a new research method for mapping impacts of mining on ecosystem services, which offer spatially explicit information for decision-makers and environmental regulators to carry out feasible policies, balancing mining development with ecosystem services provision. © 2020 Elsevier B.V.

Impact of load ramping on power transformer dissolved gas analysis

Wed 07 Apr 2021 14:02:24 AEST

Dissolved gas in oil analysis (DGA) is one of the most reliable condition monitoring techniques, which is currently used by the industry to detect incipient faults within the power transformers. While the technique is well matured since the development of various offline and online measurement techniques along with various interpretation methods, no much attention was given so far to the oil sampling time and its correlation with the transformer loading. A power transformer loading is subject to continuous daily and seasonal variations, which is expected to increase with the increased penetration level of renewable energy sources of intermittent characteristics, such as photovoltaic (PV) and wind energy into the current electricity grids. Generating unit transformers also undergoes similar loading variations to follow the demand, particularly in the new electricity market. As such, the insulation system within the power transformers is expected to exhibit operating temperature variations due to the continuous ramping up and down of the generation and load. If the oil is sampled for the DGA measurement during such ramping cycles, results will not be accurate, and a fault may be reported due to a gas evolution resulting from such temporarily loading variation. This paper is aimed at correlating the generation and load ramping with the DGA measurements through extensive experimental analyses. The results reveal a strong correlation between the sampling time and the generation/load ramping. The experimental results show the effect of load variations on the gas generation and demonstrate the vulnerabilities of misinterpretation of transformer faults resulting from temporary gas evolution. To achieve accurate DGA, transformer loading profile during oil sampling for the DGA measurement should be available. Based on the initial investigation in this paper, the more accurate DGA results can be achieved after a ramping down cycle of the load. This sampling time could be defined as an optimum oil sampling time for transformer DGA.

Criteria to measure social media value in health care settings : narrative literature review

Wed 07 Apr 2021 14:02:21 AEST

Background: With the growing use of social media in health care settings, there is a need to measure outcomes resulting from its use to ensure continuous performance improvement. Despite the need for measurement, a unified approach for measuring the value of social media used in health care remains elusive. Objective: This study aimed to elucidate how the value of social media in health care settings can be ascertained and to taxonomically identify steps and techniques in social media measurement from a review of relevant literature. Methods: A total of 65 relevant articles drawn from 341 articles on the subject of measuring social media in health care settings were qualitatively analyzed and synthesized. The articles were selected from the literature from diverse disciplines including business, information systems, medical informatics, and medicine. Results: The review of the literature showed different levels and focus of analysis when measuring the value of social media in health care settings. It equally showed that there are various metrics for measurement, levels of measurement, approaches to measurement, and scales of measurement. Each may be relevant, depending on the use case of social media in health care. Conclusions: A comprehensive yardstick is required to simplify the measurement of outcomes resulting from the use of social media in health care. At the moment, there is neither a consensus on what indicators to measure nor on how to measure them. We hope that this review is used as a starting point to create a comprehensive measurement criterion for social media used in health care. © 2019 Chukwuma Ukoha, Andrew Stranieri.

Adversarial heterogeneous network embedding with metapath attention mechanism

Wed 07 Apr 2021 14:02:20 AEST

Heterogeneous information network (HIN)-structured data provide an effective model for practical purposes in real world. Network embedding is fundamental for supporting the network-based analysis and prediction tasks. Methods of network embedding that are currently popular normally fail to effectively preserve the semantics of HIN. In this study, we propose AGA2Vec, a generative adversarial model for HIN embedding that uses attention mechanisms and meta-paths. To capture the semantic information from multi-typed entities and relations in HIN, we develop a weighted meta-path strategy to preserve the proximity of HIN. We then use an autoencoder and a generative adversarial model to obtain robust representations of HIN. The results of experiments on several real-world datasets show that the proposed approach outperforms state-of-the-art approaches for HIN embedding. © 2019, Springer Science+Business Media, LLC & Science Press, China.

Multi-agent systems in ICT enabled smart grid : A status update on technology framework and applications

Wed 07 Apr 2021 14:02:15 AEST

Multi-agent-based smart grid applications have gained much attention in recent times. At the same time, information and communication technology (ICT) has become a crucial part of the smart grid infrastructure. The key intention of this work is to present a comprehensive review of the literature and technological frameworks for the application of multi-agent system (MAS) and ICT infrastructure usages in smart grid implementations. In the smart grid, agents are defined as intelligent entities with the ability to take decisions and acting flexibly and autonomously according to their built-in intelligence utilizing previous experiences. Whereas, ICT enables conventional grid turned into the smart grid through data and information exchange. This paper summarizes the multi-agent concept of smart grid highlighting their applications through a detailed and extensive literature survey on the related topics. In addition to the above, a particular focus has been put on the ICT standards, including IEC 61850 incorporating ICT with MAS. Finally, a laboratory framework concepts have been added highlighting the implementation of IEC 61850.

Classifying transformer winding deformation fault types and degrees using FRA based on support vector machine

Wed 07 Apr 2021 14:02:14 AEST

As an important part of power system, power transformer plays an irreplaceable role in the process of power transmission. Diagnosis of transformer's failure is of significance to maintain its safe and stable operation. Frequency response analysis (FRA) has been widely accepted as an effective tool for winding deformation fault diagnosis, which is one of the common failures for power transformers. However, there is no standard and reliable code for FRA interpretation as so far. In this paper, support vector machine (SVM) is combined with FRA to diagnose transformer faults. Furthermore, advanced optimization algorithms are also applied to improve the performance of models. A series of winding fault emulating experiments were carried out on an actual model transformer, the key features are extracted from measured FRA data, and the diagnostic model is trained and obtained, to arrive at an outcome for classifying the fault types and degrees of winding deformation faults with satisfactory accuracy. The diagnostic results indicate that this method has potential to be an intelligent, standardized, accurate and powerful tool.

Identification of coherent generators by support vector clustering with an embedding strategy

Wed 07 Apr 2021 14:02:12 AEST

Identification of coherent generators (CGs) is necessary for the area-based monitoring and protection system of a wide area power system. Synchrophasor has enabled smarter monitoring and control measures to be devised; hence, measurement-based methodologies can be implemented in online applications to identify the CGs. This paper presents a new framework for coherency identification that is based on the dynamic coupling of generators. A distance matrix that contains the dissimilarity indices between any pair of generators is constructed from the pairwise dynamic coupling of generators after the post-disturbance data are obtained by phasor measurement units (PMUs). The dataset is embedded in Euclidean space to produce a new dataset with a metric distance between the points, and then the support vector clustering (SVC) technique is applied to the embedded dataset to identify the final clusters of generators. Unlike other clustering methods that need a priori knowledge about the number of clusters or the parameters of clustering, this information is set in an automatic search procedure that results in the optimal number of clusters. The algorithm is verified by time-domain simulations of defined scenarios in 39 bus and 118 bus test systems. Finally, the clustering result of 39 bus systems is validated by cluster validity measures, and a comparative study investigates the efficacy of the proposed algorithm to cluster the generators with an optimal number of clusters and also its computational efficiency compared with other clustering methods.

The effects of electrical and thermal boundary condition on the simulation of radiofrequency ablation of liver cancer for tumours located near to the liver boundary

Wed 07 Apr 2021 14:02:05 AEST

Effects of different boundary conditions prescribed across the boundaries of radiofrequency ablation (RFA) models of liver cancer are investigated for the case where the tumour is at the liver boundary. Ground and Robin-type conditions (electrical field) and body temperature and thermal insulation (thermal field) conditions are examined. 3D models of the human liver based on publicly-available CT images of the liver are developed. An artificial tumour is placed inside the liver at the boundary. Simulations are carried out using the finite element method. The numerical results indicated that different electrical and thermal boundary conditions led to different predictions of the electrical potential, temperature and thermal coagulation distributions. Ground and body temperature conditions presented an unnatural physical conditions around the ablation site, which results in more intense Joule heating and excessive heat loss from the tissue. This led to thermal damage volumes that are smaller than the cases when the Robin type or the thermal insulation conditions are prescribed. The present study suggests that RFA simulations in the future must take into consideration the choice of the type of electrical and thermal boundary conditions to be prescribed in the case where the tumour is located near to the liver boundary.

DRfit : A Java tool for the analysis of discrete data from multi-well plate assays

Wed 07 Apr 2021 14:02:04 AEST

Background: Analyses of replicates in sets of discrete data, typically acquired in multi-well plate formats, is a recurring task in many contemporary areas in the Life Sciences. The availability of accessible cross-platform data analysis tools for such fundamental tasks in varied projects and environments is an important prerequisite to ensuring a reliable and timely turnaround as well as to provide practical analytical tools for student training. Results: We have developed an easy-to-use, interactive software tool for the analysis of multiple data sets comprising replicates of discrete bivariate data points. For each dataset, the software identifies the replicate data points from a defined matrix layout and calculates their means and standard errors. The averaged values are then automatically fitted using either a linear or a logistic dose response function. Conclusions: DRfit is a practical and convenient tool for the analysis of one or multiple sets of discrete data points acquired as replicates from multi-well plate assays. The design of the graphical user interface and the built-in analysis features make it a flexible and useful tool for a wide range of different assays.

Diagnosing transformer winding deformation faults based on the analysis of binary image obtained from FRA signature

Wed 07 Apr 2021 14:02:00 AEST

Frequency response analysis (FRA) has been widely accepted as a diagnostic tool for power transformer winding deformation faults. Typically, both amplitude-frequency and phase-frequency signatures are obtained by an FRA analyzer. However, most existing FRA analyzers use only the information on amplitude-frequency signature, while phase-frequency information is neglected. It is also found that in some cases, the diagnostic results obtained by FRA amplitude-frequency signatures do not comply with some hard evidence. This paper introduces a winding deformation diagnostic method based on the analysis of binary images obtained from FRA signatures to improve FRA outcomes. The digital image processing technique is used to process the binary image and obtain a diagnostic indicator, to arrive at an outcome for interpreting winding faults with improved accuracy.

Dual mechanical port machine based hybrid electric vehicle using reduced switch converters

Wed 07 Apr 2021 14:01:56 AEST

Due to the increased environmental pollution, hybrid vehicles have attracted enormous attention in today's society. The two most important factors in designing these vehicles are size and weight. For this purpose, some researchers have presented the use of the dual-mechanical-port machine (DMPM) in hybrid electric vehicles (HEVs). This paper presents two modified converter topologies with a reduced number of switching devices for use on DMPM-based HEVs, with the goal of reducing the overall size and weight of the system. Beside the design of the DMPM in the series-parallel HEV structure along with the energy management unit, the conventional back-to-back (BB) converter is replaced with nine-switch (NS) and five-leg (FL) converters. These converters have never been examined for the DMPM-based HEV, and therefore, the objective of this paper is to reveal the operational characteristics and power flow mechanism of this machine using the NS and FL converters. The simulation analysis is carried out using MATLAB/Simulink considering all HEV operational modes. In addition, two proposed and the conventional converters are compared in terms of losses, maximum achievable voltages, required dc-link voltages, the rating of the components, and torque ripple, and finally, a recommendation is made based on the obtained results.

Detection of power transformer winding deformation using improved FRA based on binary morphology and extreme point variation

Wed 07 Apr 2021 14:01:46 AEST

IEEE Frequency response analysis (FRA) has recently been developed as a widely accepted tool for power transformer winding mechanical deformation diagnosis, and has proven to be effective and powerful in many cases. However, there still exist problems regarding the application of FRA. FRA is a comparative method in which the measured FRA signature should be compared with its fingerprint. Small differences of FRA signatures in certain frequency bands might be produced by external disturbance, which hinders fault diagnosis. Additionally, the existing correlation coefficient indicator recommended by power industry standards cannot reflect key information of signatures, namely the extreme points. This paper proposes an improved FRA based on binary morphology and extreme point variation. Binary morphology is first introduced to extract the certain frequency bands of signatures with significant difference. A composite indicator of extreme point variation is adopted to realize the diagnosis of fault level. A ternary diagram is constructed by the area proportions of the binary image to identify winding faults, which has a potential to realize cluster analysis of fault types.

Improved method to obtain the online impulse frequency response signature of a power transformer by multi scale complex CWT

Wed 07 Apr 2021 14:01:46 AEST

Online impulse frequency response analysis (IFRA) has proven to be a promising method to detect and diagnose the transformer winding mechanical faults when the transformer is in service. However, the existing fast Fourier transform (FFT) is actually not suitable for processing the transient signals in online IFRA. The field test result also shows that the IFRA signature obtained by FFT is easily distorted by noise. An improved method to obtain the online IFRA signature based on multi-scale complex continuous wavelet transform is proposed. The electrical model simulation and online experiment indicate the superiority of the wavelet transform compared with FFT. This paper provides guidance on the actual application of the online IFRA method.

Time-delay analysis of wide area voltage control considering smart grid contingences in real-time environment

Wed 07 Apr 2021 14:01:46 AEST

IEEE This paper addresses the time delay effects of the wide area monitoring and control systems (WAMCS) in smart power grids which may critically impact system stability. The main purpose is to conduct a detailed delay analysis of the WAMCS in case of grid contingences. This analysis is performed via an advanced WAMCS testbed where a wide area controller (WAC) for a flexible AC transmission system (FACTS) device is implemented. The real-time measurements for the WAC are collected using phasor measurements units (PMU). The testbed is resulted from an interface of four main segments known as the WAC, the actual FACTS device, the local area controller, and the power grid system along with the PMUs are simulated via real time digital simulator (RTDS). To mimic the real case scenario both hardware-in-the-loop (HIL) and software-in-the-loop (SIL) schemes are adopted in the experimental testbed, considering time delay effects. The results obtained clarify the effect of delay in WAMCS in case of smart grid contingences.

A new cascaded multilevel inverter topology with galvanic isolation

Wed 07 Apr 2021 14:01:43 AEST

IEEE This paper presents a new compact three-phase cascaded multilevel inverter (CMLI) topology with reduced device count and high frequency magnetic link. The proposed topology overcomes the predominant limitation of separate DC power supplies, which CMLI always require. The high frequency magnetic link also provides a galvanic isolation between the input and output sides of the inverter, which is essential for various grid-connected applications. The proposed topology utilizes an asymmetric inverter configuration that consists of cascaded H-bridge cells and a conventional three-phase two-level inverter. A toroidal core is employed for the high frequency magnetic link to ensure compact size and high-power density. Compared with counterpart CMLI topologies available in the literatures, the proposed inverter has the advantage of utilizing the least number of power electronic components without compromising the overall performance, particularly when a high number of output voltage levels is required. The feasibility of the proposed inverter is confirmed through extensive simulation and experimentally validated studies.

Collecting health and exposure data in Australian olympic combat sports : Feasibility study utilizing an electronic system

Wed 07 Apr 2021 14:01:38 AEST

Background: Electronic methods are increasingly being used to manage health-related data among sporting populations. Collection of such data permits the analysis of injury and illness trends, improves early detection of injuries and illnesses, collectively referred to as health problems, and provides evidence to inform prevention strategies. The Athlete Management System (AMS) has been employed across a range of sports to monitor health. Australian combat athletes train across the country without dedicated national medical or sports science teams to monitor and advocate for their health. Employing a Web-based system, such as the AMS, May provide an avenue to increase the visibility of health problems experienced by combat athletes and deliver key information to stakeholders detailing where prevention programs May be targeted. Objective: The objectives of this paper are to (1) report on the feasibility of utilizing the AMS to collect longitudinal injury and illness data of combat sports athletes and (2) describe the type, location, severity, and recurrence of injuries and illnesses that the cohort of athletes experience across a 12-week period. Methods: We invited 26 elite and developing athletes from 4 Olympic combat sports (boxing, judo, taekwondo, and wrestling) to participate in this study. Engagement with the AMS was measured, and collected health problems (injuries or illnesses) were coded using the Orchard Sports Injury Classification System (version 10.1) and International Classification of Primary Care (version 2). Results: Despite >160 contacts, athlete engagement with online tools was poor, with only 13% compliance across the 12-week period. No taekwondo or wrestling athletes were compliant. Despite low overall engagement, a large number of injuries or illness were recorded across 11 athletes who entered data—22 unique injuries, 8 unique illnesses, 30 recurrent injuries, and 2 recurrent illnesses. The most frequent injuries were to the knee in boxing (n=41) and thigh in judo (n=9). In this cohort, judo players experienced more severe, but less frequent, injuries than boxers, yet judo players sustained more illnesses than boxers. In 97.0% (126/130) of cases, athletes in this cohort continued to train irrespective of their health problems. Conclusions: Among athletes who reported injuries, many reported multiple conditions, indicating a need for health monitoring in Australian combat sports. A number of factors May have influenced engagement with the AMS, including access to the internet, the design of the system, coach views on the system, previous experiences with the system, and the existing culture within Australian combat sports. To increase engagement, there May be a requirement for sports staff to provide relevant feedback on data entered into the system. Until the Barriers are addressed, it is not feasible to implement the system in its current form across a larger cohort of combat athletes.

The role of interoperable data standards in precision livestock farming in extensive livestock systems : A review

Wed 07 Apr 2021 14:01:38 AEST

Livestock industries are increasingly embracing precision farming and decision support tools. As a result, sensors, weather stations, individual animal tracking, feed monitoring and other sources create large data volumes, much of which is used only for a single purpose. There are unrealised potential benefits of making on farm data interoperable and accessible and federating it with public data sources. We reviewed recent literature on precision livestock farming (PLF) technologies in relation to the use of public data, open standards and interoperability. Livestock farms produce rising volumes of disparate private datasets, reflecting a variety of information needs and technological opportunities, but typically lacking interoperable formats and metadata. These as well as large amounts of accessible public datasets are currently underutilised in decision support tools. Tools that demonstrate the use of interoperable standards and bring together public and private data for decision support can enhance the value proposition and help lower barriers to the sharing and re-use of data. This review of interoperable standards in extensive livestock farming systems concludes that there is a need for not only a new type of decision support tool, but also a consensus on data exchange standards to prove the value of shared data at farm scale (commercial benefit) and a regional scale (public good). © 2018

Development of flexible haptic forceps based on the electrohydraulic transmission system

Wed 07 Apr 2021 14:01:37 AEST

Minimally invasive surgery (MIS) has many benefits, e.g., unnecessary trauma and blood loss can be minimized by opening tiny surgery scars, recovery process of patients can be lessened, and the possibilities of complications can be decreased. The natural orifice transluminal surgery (NOTES) is one of the MIS surgical methodologies. NOTES surgery is performed using an endoscope. This methodology does not rely on making holes to patients' body to insert the medical instruments. Although some medical robots for NOTES have been proposed, current robots mainly suffer from the absence/limitation of haptic feedback to the surgeon's hands. In order to overcome this problem, this paper proposes electro hydraulic transmission system (EHTS) based forceps. The EHTS is a remote actuation system using fluid energy. By using the EHTS, the classical position and force transmission losses will not be influenced by the tube's shape. The validity of the proposal and its advantages have been experimentally verified and presented in this paper.

On the security of permutation-only image encryption schemes

Wed 07 Apr 2021 14:01:35 AEST

Permutation is a commonly used primitive in multimedia (image/video) encryption schemes, and many permutation-only algorithms have been proposed in recent years for the protection of multimedia data. In permutation-only image ciphers, the entries of the image matrix are scrambled using a permutation mapping matrix which is built by a pseudo-random number generator. The literature on the cryptanalysis of image ciphers indicates that the permutation-only image ciphers are insecure against ciphertext-only attacks and/or known/chosenplaintext attacks. However, the previous studies have not been able to ensure the correct retrieval of the complete plaintext elements. In this paper, we revisited the previous works on cryptanalysis of permutation-only image encryption schemes and made the cryptanalysis work on chosen-plaintext attacks complete and more efficient. We proved that in all permutationonly image ciphers, regardless of the cipher structure, the correct permutation mapping is recovered completely by a chosenplaintext attack. To the best of our knowledge, for the first time, this paper gives a chosen-plaintext attack that completely determines the correct plaintext elements using a deterministic method. When the plain-images are of size M × N and with L different color intensities, the number n of required chosen plain-images to break the permutation-only image encryption algorithm is n = logL(MN). The complexity of the proposed attack is O (n · M N) which indicates its feasibility in a polynomial amount of computation time. To validate the performance of the proposed chosen-plaintext attack, numerous experiments were performed on two recently proposed permutation-only image/video ciphers. Both theoretical and experimental results showed that the proposed attack outperforms the state-of-theart cryptanalytic methods.

A 3D object encryption scheme which maintains dimensional and spatial stability

Wed 07 Apr 2021 14:01:35 AEST

Due to widespread applications of 3D vision technology, the research into 3D object protection is primarily important. To maintain confidentiality, encryption of 3D objects is essential. However, the requirements and limitations imposed by 3D objects indicate the impropriety of conventional cryptosystems for 3D object encryption. This suggests the necessity of designing new ciphers. In addition, the study of prior works indicates that the majority of problems encountered with encrypting 3D objects are about point cloud protection, dimensional and spatial stability, and robustness against surface reconstruction attacks. To address these problems, this paper proposes a 3D object encryption scheme, based on a series of random permutations and rotations, which deform the geometry of the point cloud. Since the inverse of a permutation and a rotation matrix is its transpose, the decryption implementation is very efficient. Our statistical analyses show that within the cipher point cloud, points are randomly distributed. Furthermore, the proposed cipher leaks no information regarding the geometric structure of the plain point cloud, and is also highly sensitive to the changes of the plaintext and secret key. The theoretical and experimental analyses demonstrate the security, effectiveness, and robustness of the proposed cipher against surface reconstruction attacks.

Multi-label learning with emerging new labels

Wed 07 Apr 2021 14:01:33 AEST

In a multi-label learning task, an object possesses multiple concepts where each concept is represented by a class label. Previous studies on multi-label learning have focused on a fixed set of class labels, i.e., the class label set of test data is the same as that in the training set. In many applications, however, the environment is dynamic and new concepts may emerge in a data stream. In order to maintain a good predictive performance in this environment, a multi-label learning method must have the ability to detect and classify instances with emerging new labels. To this end, we propose a new approach called Multi-label learning with Emerging New Labels (MuENL). It has three functions: classify instances on currently known labels, detect the emergence of a new label, and construct a new classifier for each new label that works collaboratively with the classifier for known labels. In addition, we show that MuENL can be easily extended to handle sparse high dimensional data streams by simply reducing the original dimensionality, and then applying MuENL on the reduced dimensional space. Our empirical evaluation shows the effectiveness of MuENL on several benchmark datasets and MuENLHD on the sparse high dimensional Weibo dataset.

Non-functional regression : A new challenge for neural networks

Wed 07 Apr 2021 14:01:33 AEST

This work identifies an important, previously unaddressed issue for regression based on neural networks – learning to accurately approximate problems where the output is not a function of the input (i.e. where the number of outputs required varies across input space). Such non-functional regression problems arise in a number of applications, and can not be adequately handled by existing neural network algorithms. To demonstrate the benefits possible from directly addressing non-functional regression, this paper proposes the first neural algorithm to do so – an extension of the Resource Allocating Network (RAN) which adds additional output neurons to the network structure during training. This new algorithm, called the Resource Allocating Network with Varying Output Cardinality (RANVOC), is demonstrated to be capable of learning to perform non-functional regression, on both artificially constructed data and also on the real-world task of specifying parameter settings for a plasma-spray process. Importantly RANVOC is shown to outperform not just the original RAN algorithm, but also the best possible error rates achievable by any functional form of regression.

Adaptive weighted non-parametric background model for efficient video coding

Wed 07 Apr 2021 14:01:31 AEST

Dynamic background frame based video coding using mixture of Gaussian (MoG) based background modelling has achieved better rate distortion performance compared to the H.264 standard. However, they suffer from high computation time, low coding efficiency for dynamic videos, and prior knowledge requirement of video content. In this paper, we introduce the application of the non-parametric (NP) background modelling approach for video coding domain. We present a novel background modelling technique, called weighted non-parametric (WNP) which balances the historical trend and the recent value of the pixel intensities adaptively based on the content and characteristics of any particular video. WNP is successfully embedded into the latest HEVC video coding standard for better rate-distortion performance. Moreover, a novel scene adaptive non-parametric (SANP) technique is also developed to handle video sequences with high dynamic background. Being non-parametric, the proposed techniques naturally exhibit superior performance in dynamic background modelling without a priori knowledge of video data distribution.

Continuous patient monitoring with a patient centric agent : A block architecture

Wed 07 Apr 2021 14:01:29 AEST

The Internet of Things (IoT) has facilitated services without human intervention for a wide range of applications, including continuous remote patient monitoring (RPM). However, the complexity of RPM architectures, the size of data sets generated and limited power capacity of devices make RPM challenging. In this paper, we propose a tier-based End to End architecture for continuous patient monitoring that has a patient centric agent (PCA) as its center piece. The PCA manages a blockchain component to preserve privacy when data streaming from body area sensors needs to be stored securely. The PCA based architecture includes a lightweight communication protocol to enforce security of data through different segments of a continuous, real time patient monitoring architecture. The architecture includes the insertion of data into a personal blockchain to facilitate data sharing amongst healthcare professionals and integration into electronic health records while ensuring privacy is maintained. The blockchain is customized for RPM with modifications that include having the PCA select a Miner to reduce computational effort, enabling the PCA to manage multiple blockchains for the same patient, and the modification of each block with a prefix tree to minimize energy consumption and incorporate secure transaction payments. Simulation results demonstrate that security and privacy can be enhanced in RPM with the PCA based End to End architecture.

Internet Gaming Disorder : The interplay between physical activity and user–avatar relationship

Wed 07 Apr 2021 14:01:27 AEST

Understanding both the risk and protective factors associated with Internet Gaming Disorder (IGD) has been viewed by many in the gaming studies field as an area of research priority. The present study focused on the potential risk and protective effects of user–avatar (game figure) relationship and physical activity (PA), respectively. To address these aims, a cross-sectional and a longitudinal mixed-methods design were combined (comprising both psychological and physiological assessments). A sample of 121 emerging adult gamers (18–29 years) residing in Australia, who played massively multiplayer online games, were assessed in relation to their IGD behaviours using the nine-item Internet Gaming Disorder Scale–Short Form. Additionally, the Proto-Self-Presence (PSP) scale was used to evaluate the extent to which gamers identified with the body of their avatar. Finally, a PA monitor (Fitbit Flex) measured levels of energy consumed during real-world daily activities (active minutes). A number of linear regressions and moderation analyses were conducted. Findings confirmed that PSP functioned as an IGD risk factor and that PA acted protectively, weakening the association between PSP and IGD behaviours. Implications of these findings are discussed in relation to IGD treatment and gaming development aspects.

Flow on the Internet : A longitudinal study of Internet addiction symptoms during adolescence

Wed 07 Apr 2021 14:01:16 AEST

Internet Addiction (IA) constitutes an excessive Internet use behavior with a significant impact on the user’s well-being. Online flow describes the users’ level of being absorbed by their online activity. The present study investigated age-related, gender, and flow effects on IA in adolescence. The sample comprised 648 adolescents who were assessed twice at age 16 and 18 years. IA was assessed using the Internet Addiction Test and online flow was assessed using the Online Flow Questionnaire. A three-level hierarchical model estimated age-related, gender, and online flow effects on IA symptoms and controlled for clustered random effects. IA symptoms decreased over time (for both genders) with a slower rate in males. Online flow was associated with IA symptoms and this remained consistent over time. Findings expand upon the available literature suggesting that IA symptoms could function as a development-related manifestation at the age of 16 years, while IA-related gender differences gradually increase between 16 and 18 years. Finally, the association between online flow and IA symptoms remained stable independent of age-related effects. The study highlights individual differences and provides directions for more targeted prevention and intervention initiatives for IA. © 2018 Informa UK Limited, trading as Taylor & Francis Group.

Redesigning the assessment of an entrepreneurship course in an information technology degree program : Embedding assessment for learning practices

Wed 07 Apr 2021 14:01:03 AEST

Entrepreneurship is a novel course in the curriculum for students in the Information Technology (IT) degree program at La Trobe University, Bundoora, Australia. In comparison to other IT-related courses, the Entrepreneurship course seeks to develop business management knowledge and skills; its learning design is thus different to that of other courses in the IT program. The concept of constructive alignment for curriculum renewal suggests that there are several components of good course design. In this paper, we use the principles of constructive alignment to analyze and redesign several components of the Entrepreneurship course. The focus is on reviewing and aligning the assessment tasks to ensure an effective evaluation and the achievement of student learning outcomes. Since assessment drives student learning, we describe the innovative assessment tasks that were implemented to enhance student learning, provide the rationale for the design of these tasks as supported by the current literature, and reflect on possible future improvements. The course redesign process and the constructive alignment and innovative assessment can be applied to other courses in the field, and more broadly to curriculum, teaching, and learning in higher education.

Feelings of the future

Wed 07 Apr 2021 14:01:02 AEST

Affective forecasting refers to the capacity to predict future feelings. Humans have been found to exhibit systematic affective forecasting biases that involve overestimation of the intensity and duration of future feelings. Although recent research has elucidated the proximate mechanisms underlying our ability to predict future feelings, explanations concerning the potential adaptive significance of these biases have attracted little attention. Here we consider the function of affective forecasts as signals of biological value, drivers of goal pursuit, and tools for eliciting collaboration. Although affective forecasting biases can have significant costs, for instance in terms of one's pursuit of happiness, they may ultimately serve adaptive functions.

Data analytics identify glycated haemoglobin co-markers for type 2 diabetes mellitus diagnosis

Wed 07 Apr 2021 14:00:56 AEST

Glycated haemoglobin (HbA1c) is being more commonly used as an alternative test for the identification of type 2 diabetes mellitus (T2DM) or to add to fasting blood glucose level and oral glucose tolerance test results, because it is easily obtained using point-of-care technology and represents long-term blood sugar levels. HbA1c cut-off values of 6.5% or above have been recommended for clinical use based on the presence of diabetic comorbidities from population studies. However, outcomes of large trials with a HbA1c of 6.5% as a cut-off have been inconsistent for a diagnosis of T2DM. This suggests that a HbA1c cut-off of 6.5% as a single marker may not be sensitive enough or be too simple and miss individuals at risk or with already overt, undiagnosed diabetes. In this study, data mining algorithms have been applied on a large clinical dataset to identify an optimal cut-off value for HbA1c and to identify whether additional biomarkers can be used together with HbA1c to enhance diagnostic accuracy of T2DM. T2DM classification accuracy increased if 8-hydroxy-2-deoxyguanosine (8-OhdG), an oxidative stress marker, was included in the algorithm from 78.71% for HbA1c at 6.5% to 86.64%. A similar result was obtained when interleukin-6 (IL-6) was included (accuracy=85.63%) but with a lower optimal HbA1c range between 5.73 and 6.22%. The application of data analytics to medical records from the Diabetes Screening programme demonstrates that data analytics, combined with large clinical datasets can be used to identify clinically appropriate cut-off values and identify novel biomarkers that when included improve the accuracy of T2DM diagnosis even when HbA1c levels are below or equal to the current cut-off of 6.5%. © 2016 Elsevier Ltd.

Redesigning the assessment of an entrepreneurship course in an information technology degree program : Embedding assessment for learning practices

Wed 07 Apr 2021 14:00:54 AEST

A new modified FMEA model for ranking the risk of maintenance waste considering hierarchy of root causes and effects

Wed 07 Apr 2021 14:00:32 AEST

Implementing sustainable manufacturing practice requires efficiency of the resource utilisation and activities which add value to the operations. From this point of view, development of an improved methodology to access the criticality of non- Added value (waste) is important and believed to support the realisation of sustainable manufacturing operation. While previous studies on improving methodology to support sustainable operation from product and process design are abundantly available in the references, the contribution from maintenance field is in contrary. The goal of this study is to modify the quality improvement tool, failure mode and effect analysis (FMEA) to access the criticality of waste in maintenance operation. In an attempt to realise the above goal, an empirical study to propose the theoretical and actual maintenance waste from industrial practice is undertaken. In order to assist maintenance 218 A. Sutrisno et al. decision maker to quantify criticality of maintenance waste occurrence, a new model to rank waste maintenance mode, called the waste priority number (WPN) is given. Illustrative on using model for practical purpose is given.. © 2015 Inderscience Enterprises Ltd.

A modified immune network optimization algorithm

Wed 07 Apr 2021 14:00:30 AEST

This study proposes a modified artificial immune network algorithm for function optimization problems based on idiotypic immune network theory. A hyper-cubic mutation operator was introduced to reduce the heavy computational cost of the traditional opt-AINet algorithm. Moreover, the new symmetrical mutation can effectively improve local search. To maintain population diversity, we also devised an immune selection mechanism based on density and fitness. The global convergence of the algorithm was deduced through the method of pure probability and iterative formula. Simulation results of benchmark function optimization show that the modified algorithm converges more effectively than other immune network algorithms.

Simplifying and improving ant-based clustering

Wed 07 Apr 2021 14:00:24 AEST

Ant-based clustering (ABC) is a data clustering approach inspired from cemetery formation activities observed in real ant colonies. Building upon the premise of collective intelligence, such an approach uses multiple ant-like agents and a mixture of heuristics, in order to create systems that are capable of clustering real-world data. Many recently proposed ABC systems have shown competitive results, but these systems are geared towards adding new heuristics, resulting in increasingly complex systems that are harder to understand and improve. In contrast to this direction, we demonstrate that a state-of-the-art ABC system can be systematically evaluated and then simplified. The streamlined model, which we call SABC, differs fundamentally from traditional ABC systems as it does not use the ant-colony and several key components. Yet, our empirical study shows that SABC performs more effectively and effciently than the state-of-the-art ABC system.

Steering approaches to Pareto-optimal multiobjective reinforcement learning

Wed 07 Apr 2021 14:00:22 AEST

For reinforcement learning tasks with multiple objectives, it may be advantageous to learn stochastic or non-stationary policies. This paper investigates two novel algorithms for learning non-stationary policies which produce Pareto-optimal behaviour (w-steering and Q-steering), by extending prior work based on the concept of geometric steering. Empirical results demonstrate that both new algorithms offer substantial performance improvements over stationary deterministic policies, while Q-steering significantly outperforms w-steering when the agent has no information about recurrent states within the environment. It is further demonstrated that Q-steering can be used interactively by providing a human decision-maker with a visualisation of the Pareto front and allowing them to adjust the agent’s target point during learning. To demonstrate broader applicability, the use of Q-steering in combination with function approximation is also illustrated on a task involving control of local battery storage for a residential solar power system.

Softmax exploration strategies for multiobjective reinforcement learning

Wed 07 Apr 2021 14:00:22 AEST

Despite growing interest over recent years in applying reinforcement learning to multiobjective problems, there has been little research into the applicability and effectiveness of exploration strategies within the multiobjective context. This work considers several widely-used approaches to exploration from the single-objective reinforcement learning literature, and examines their incorporation into multiobjective Q-learning. In particular this paper proposes two novel approaches which extend the softmax operator to work with vector-valued rewards. The performance of these exploration strategies is evaluated across a set of benchmark environments. Issues arising from the multiobjective formulation of these benchmarks which impact on the performance of the exploration strategies are identified. It is shown that of the techniques considered, the combination of the novel softmax–epsilon exploration with optimistic initialisation provides the most effective trade-off between exploration and exploitation.

A machine vision based automatic optical inspection system for measuring drilling quality of printed circuit boards

Wed 07 Apr 2021 13:57:15 AEST

In this paper, we develop and put into practice an automatic optical inspection (AOI) system based on machine vision to check the holes on a printed circuit board (PCB). We incorporate the hardware and software. For the hardware part, we combine a PC, the three-axis positioning system, a lighting device, and charge-coupled device cameras. For the software part, we utilize image registration, image segmentation, drill numbering, drill contrast, and defect displays to achieve this system. Results indicated that an accuracy of 5 mu m could be achieved in errors of the PCB holes allowing comparisons to be made. This is significant in inspecting the missing, the multi-hole, and the incorrect location of the holes. However, previous work only focuses on one or other feature of the holes. Our research is able to assess multiple features: missing holes, incorrectly located holes, and excessive holes. Equally, our results could be displayed as a bar chart and target plot. This has not been achieved before. These displays help users to analyze the causes of errors and immediately correct the problems. In addition, this AOI system is valuable for checking a large number of holes and finding out the defective ones on a PCB. Meanwhile, we apply a 0.1-mm image resolution, which is better than others used in industry. We set a detecting standard based on 2-mm diameter of circles to diagnose the quality of the holes within 10 s.

A multilevel longitudinal study of experiencing virtual presence in adolescence : The role of anxiety and openness to experience in the classroom

Wed 07 Apr 2021 13:57:15 AEST

Presence describes the feeling of reality and immersion that users of virtual/Internet environments have. Importantly, it has been suggested that there are individual and contextual differences regarding susceptibility to presence. These aspects of presence have been linked to both beneficial and disadvantageous uses of the Internet, such as online therapeutic applications and addictive Internet behaviours. In the present study, presence was studied in relation to individual anxiety symptoms and classroom-level openness to experience (OTE) using a normative sample of 648 adolescents aged between 16 and 18 years. Presence was assessed with the Presence II questionnaire, anxiety symptoms with the relevant subscales of the SCL-90-R, and OTE with the Five-Factor Questionnaire. A three-level hierarchical linear model was calculated. Results showed that experiencing presence in virtual environments dropped between the ages of 16 and 18 years. Additionally, although anxiety symptoms were associated with higher presence at 16 years, this association decreased with age. Results also demonstrated that adolescents in classrooms higher on OTE reported reduced level of experiencing presence. The practical and theoretical implications of these findings are discussed.

Characterizations of minimal elements of topical functions on semimodules with applications

Wed 07 Apr 2021 13:57:14 AEST

In this paper, we first give characterizations of the superdifferential of extended valued topical functions defined on a semimodule with values in a semifield. Next, we characterize minimal elements of the upper support set of extended valued topical functions. Finally, as an application, we present a necessary and sufficient condition for global maximum of the difference of two strictly topical functions defined on a semimodule. (C) 2017 Elsevier Inc. All rights reserved.

Improving authorship attribution in twitter through topic-based sampling

Wed 07 Apr 2021 13:57:13 AEST

Aliases are used as a means of anonymity on the Internet in environments such as IRC (internet relay chat), forums and micro-blogging websites such as Twitter. While there are genuine reasons for the use of aliases, such as journalists operating in politically oppressive countries, they are increasingly being used by cybercriminals and extremist organisations. In recent years, we have seen increased research on authorship attribution of Twitter messages, including authorship analysis of aliases. Previous studies have shown that anti-aliasing of randomly generated sub-aliases yields high accuracies when linking the sub-aliases, but become much less accurate when topic-based sub-aliases are used. N-gram methods have previously been demonstrated to perform better than other methods in this situation. This paper investigates the effect of topic-based sampling on authorship attribution accuracy for the popular micro-blogging website Twitter. Features are extracted using character n-grams, which accurately capture differences in authorship style. These features are analysed using support vector machines using a one-versus-all classifier. The predictive performance of the algorithm is then evaluated using two different sampling methodologies - authors that were sampled through a context-sensitive topic-based search and authors that were sampled randomly. Topic-based sampling of authors is found to produce more accurate authorship predictions. This paper presents several theories as to why this might be the case. © Springer International Publishing AG 2017.

Rock-burst occurrence prediction based on optimized naïve bayes models

Tue 30 Nov 2021 13:28:10 AEDT

Rock-burst is a common failure in hard rock related projects in civil and mining construction and therefore, proper classification and prediction of this phenomenon is of interest. This research presents the development of optimized naïve Bayes models, in predicting rock-burst failures in underground projects. The naïve Bayes models were optimized using four weight optimization techniques including forward, backward, particle swarm optimization, and evolutionary. An evolutionary random forest model was developed to identify the most significant input parameters. The maximum tangential stress, elastic energy index, and uniaxial tensile stress were then selected by the feature selection technique (i.e., evolutionary random forest) to develop the optimized naïve Bayes models. The performance of the models was assessed using various criteria as well as a simple ranking system. The results of this research showed that particle swarm optimization was the most effective technique in improving the accuracy of the naïve Bayes model for rock-burst prediction (cumulative ranking = 21), while the backward technique was the worst weight optimization technique (cumulative ranking = 11). All the optimized naïve Bayes models identified the maximum tangential stress as the most significant parameter in predicting rock-burst failures. The results of this research demonstrate that particle swarm optimization technique may improve the accuracy of naïve Bayes algorithms in predicting rock-burst occurrence. © 2013 IEEE.

Green underwater wireless communications using hybrid optical-acoustic technologies

Tue 30 Nov 2021 13:21:11 AEDT

Underwater wireless communication is a rapidly growing field, especially with the recent emergence of technologies such as autonomous underwater vehicles (AUVs) and remotely operated vehicles (ROVs). To support the high-bandwidth applications using these technologies, underwater optics has attracted significant attention, alongside its complementary technology - underwater acoustics. In this paper, we propose a hybrid opto-acoustic underwater wireless communication model that reduces network power consumption and supports high-data rate underwater applications by selecting appropriate communication links in response to varying traffic loads and dynamic weather conditions. Underwater optics offers high data rates and consumes less power. However, due to the severe absorption of light in the medium, the communication range is short in underwater optics. Conversely, acoustics suffers from low data rate and high power consumption, but provides longer communication ranges. Since most underwater equipment relies on battery power, energy-efficient communication is critical for reliable underwater communications. In this work, we derive analytical models for both underwater acoustics and optics, and calculate the required transmit power for reliable communications in various underwater communication environments. We then formulate an optimization problem that minimizes the network power consumption for carrying data from underwater nodes to surface sinks under varying traffic loads and weather conditions. The proposed optimization model can be solved offline periodically, hence the additional computational complexity to find the optimum solution for larger networks is not a limiting factor for practical applications. Our results indicate that the proposed technique yields up to 35% power savings compared to existing opto-acoustic solutions. © 2013 IEEE.

Robust image classification using a low-pass activation function and DCT augmentation

Tue 30 Nov 2021 13:14:11 AEDT

Convolutional Neural Network's (CNN's) performance disparity on clean and corrupted datasets has recently come under scrutiny. In this work, we analyse common corruptions in the frequency domain, i.e., High Frequency corruptions (HFc, e.g., noise) and Low Frequency corruptions (LFc, e.g., blur). Although a simple solution to HFc is low-pass filtering, ReLU - a widely used Activation Function (AF), does not have any filtering mechanism. In this work, we instill low-pass filtering into the AF (LP-ReLU) to improve robustness against HFc. To deal with LFc, we complement LP-ReLU with Discrete Cosine Transform based augmentation. LP-ReLU, coupled with DCT augmentation, enables a deep network to tackle the entire spectrum of corruption. We use CIFAR-10-C and Tiny ImageNet-C for evaluation and demonstrate improvements of 5% and 7.3% in accuracy respectively, compared to the State-Of-The-Art (SOTA). We further evaluate our method's stability on a variety of perturbations in CIFAR-10-P and Tiny ImageNet-P, achieving new SOTA in these experiments as well. To further strengthen our understanding regarding CNN's lack of robustness, a decision space visualisation process is proposed and presented in this work. © 2013 IEEE.

Bipolar radiofrequency ablation treatment of liver cancer employing monopolar needles : a comprehensive investigation on the efficacy of time-based switching

Tue 29 Jun 2021 17:30:47 AEST

Radiofrequency ablation (RFA) is a thermal ablative treatment method that is commonly used to treat liver cancer. However, the thermal coagulation zone generated using the conventional RFA system can only successfully treat tumours up to 3 cm in diameter. Switching bipolar RFA has been proposed as a way to increase the thermal coagulation zone. Presently, the understanding of the underlying thermal processes that takes place during switching bipolar RFA remains limited. Hence, the objective of this study is to provide a comprehensive understanding on the thermal ablative effects of time-based switching bipolar RFA on liver tissue. Five switch intervals, namely 50, 100, 150, 200 and 300 s were investigated using a two-compartment 3D finite element model. The study was performed using two pairs of RF electrodes in a four-probe configuration, where the electrodes were alternated based on their respective switch interval. The physics employed in the present study were verified against experimental data from the literature. Results obtained show that using a shorter switch interval can improve the homogeneity of temperature distribution within the tissue and increase the rate of temperature rise by delaying the occurrence of roll-off. The coagulation volume obtained was the largest using switch interval of 50 s, followed by 100, 150, 200 and 300 s. The present study demonstrated that the transient thermal response of switching bipolar RFA can be improved by using shorter switch intervals. © 2021 Elsevier Ltd

AI and IoT-Enabled smart exoskeleton system for rehabilitation of paralyzed people in connected communities

Tue 21 Sep 2021 13:03:11 AEST

In recent years, the number of cases of spinal cord injuries, stroke and other nervous impairments have led to an increase in the number of paralyzed patients worldwide. Rehabilitation that can aid and enhance the lives of such patients is the need of the hour. Exoskeletons have been found as one of the popular means of rehabilitation. The existing exoskeletons use techniques that impose limitations on adaptability, instant response and continuous control. Also most of them are expensive, bulky, and requires high level of training. To overcome all the above limitations, this paper introduces an Artificial Intelligence (AI) powered Smart and light weight Exoskeleton System (AI-IoT-SES) which receives data from various sensors, classifies them intelligently and generates the desired commands via Internet of Things (IoT) for rendering rehabilitation and support with the help of caretakers for paralyzed patients in smart and connected communities. In the proposed system, the signals collected from the exoskeleton sensors are processed using AI-assisted navigation module, and helps the caretakers in guiding, communicating and controlling the movements of the exoskeleton integrated to the patients. The navigation module uses AI and IoT enabled Simultaneous Localization and Mapping (SLAM). The casualties of a paralyzed person are reduced by commissioning the IoT platform to exchange data from the intelligent sensors with the remote location of the caretaker to monitor the real time movement and navigation of the exoskeleton. The automated exoskeleton detects and take decisions on navigation thereby improving the life conditions of such patients. The experimental results simulated using MATLAB shows that the proposed system is the ideal method for rendering rehabilitation and support for paralyzed patients in smart communities. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramanian” is provided in this record**

An adaptive and flexible brain energized full body exoskeleton with IoT edge for assisting the paralyzed patients

Tue 21 Sep 2021 12:56:10 AEST

The paralyzed population is increasing worldwide due to stroke, spinal code injury, post-polio, and other related diseases. Different assistive technologies are used to improve the physical and mental health of the affected patients. Exoskeletons have emerged as one of the most promising technology to provide movement and rehabilitation for the paralyzed. But exoskeletons are limited by the constraints of weight, flexibility, and adaptability. To resolve these issues, we propose an adaptive and flexible Brain Energized Full Body Exoskeleton (BFBE) for assisting the paralyzed people. This paper describes the design, control, and testing of BFBE with 15 degrees of freedom (DoF) for assisting the users in their daily activities. The flexibility is incorporated into the system by a modular design approach. The brain signals captured by the Electroencephalogram (EEG) sensors are used for controlling the movements of BFBE. The processing happens at the edge, reducing delay in decision making and the system is further integrated with an IoT module that helps to send an alert message to multiple caregivers in case of an emergency. The potential energy harvesting is used in the system to solve the power issues related to the exoskeleton. The stability in the gait cycle is ensured by using adaptive sensory feedback. The system validation is done by using six natural movements on ten different paralyzed persons. The system recognizes human intensions with an accuracy of 85%. The result shows that BFBE can be an efficient method for providing assistance and rehabilitation for paralyzed patients. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramanian” is provided in this record**

API : an index for quantifying a scholar's academic potential

Tue 21 Dec 2021 09:19:25 AEDT

In the context of big scholarly data, various metrics and indicators have been widely applied to evaluate the impact of scholars from different perspectives, such as publication counts, citations, ${h}$-index, and their variants. However, these indicators have limited capacity in characterizing prospective impacts or achievements of scholars. To solve this problem, we propose the Academic Potential Index (API) to quantify scholar's academic potential. Furthermore, an algorithm is devised to calculate the value of API. It should be noted that API is a dynamic index throughout scholar's academic career. By applying API to rank scholars, we can identify scholars who show their academic potentials during the early academic careers. With extensive experiments conducted based on the Microsoft Academic Graph dataset, it can be found that the proposed index evaluates scholars' academic potentials effectively and captures the variation tendency of their academic impacts. Besides, we also apply this index to identify rising stars in academia. Experimental results show that the proposed API can achieve superior performance in identifying potential scholars compared with three baseline methods. © 2019 IEEE.

Livestock data – is it there and is it FAIR? A systematic review of livestock farming datasets in Australia

Tue 12 Sep 2023 13:37:02 AEST

The global adoption of the FAIR principles for scientific data: findable, accessible, interoperable and reusable, has been relatively slow in agriculture, compared to other disciplines. A recent review of the literature showed that the use of precision farming technologies and the development and adoption of open data standards was particularly low in extensive livestock farming. However, a plethora of public datasets exist that have the potential to be used to inform precision farming decision tools. Using extensive livestock farming in Australia as example, we investigate the quantity and quality of datasets available via a systematic dataset review. This systematic review of datasets begins with a search of open data catalogues and querying these to find datasets. Software scripts are developed and used to query the Application Programming Interfaces (APIs) of many of the large data catalogues in Australia, while catalogues without public APIs are queried manually via available web portals. Following the systematic search, a combined list of all datasets is collated and tested for FAIRness and other quality metrics. The contribution of this work is the resulting overview of the state of open datasets within the livestock farming domain on the one hand, but also the development of a systematic dataset search strategy, reusable methods and software scripts. © 2021 Elsevier B.V.

Real-time dissemination of emergency warning messages in 5G enabled selfish vehicular social networks

Tue 10 Jan 2023 15:52:42 AEDT

This paper addresses the issues of selfishness, limited network resources, and their adverse effects on real-time dissemination of Emergency Warning Messages (EWMs) in modern Autonomous Moving Platforms (AMPs) such as Vehicular Social Networks (VSNs). For this purpose, we propose a social intelligence based identification mechanism to differentiate between a selfish and a cooperative node in the network. Therefore, we devise a crowdsensing based mechanism to calculate a tie-strength value based on several social metrics. Moreover, we design a recursive evolutionary algorithm for each node's reputation calculation and update. Given that, then we estimate each node's state-transition probability to select a super-spreader for rapid dissemination. In order to ensure a seamless and reliable dissemination process, we incorporate 5G network structure instead of conventional short range communication which is used in most vehicular networks at present. Finally, we design a real-time dissemination algorithm for EWMs and evaluate its performance in terms of network parameters such as delivery-ratio, delay, hop-count, and message-overhead for varying values of vehicular density, speed, and selfish nodes’ density based on realistic vehicular mobility traces. In addition, we present a comparative analysis of the performance of the proposed scheme with state-of-the-art dissemination schemes in VSNs. © 2020 Elsevier B.V.

An improved memetic approach for protein structure prediction incorporating maximal hydrophobic core estimation concept

Tue 03 Aug 2021 10:38:58 AEST

Protein Structure Prediction (PSP) from the primary amino acid sequence, even using a simplified Hydrophobic-Polar (HP) lattice model, continues to be extremely challenging. Finding an optimal conformation, even for a small sequence, by any of the currently known evolutionary approaches is computationally extensive and time consuming. Although Memetic Algorithms (MAs) have shown success in finding the optimal solution for PSP, no significant work on the incorporation of domain or problem specific knowledge into the search process to significantly improve their performance is reported. In this paper, we present an approach to incorporate such knowledge into the initial population to enhance the effectiveness of MA for PSP. The domain knowledge we propose to use is based on the concept of maximal ‘core’ formation by exploiting the fundamental property of the H residues to be at the core of the minimum energy optimal protein structure. A generic technique is proposed for estimating the maximal Hydrophobic core (H-core) in a protein sequence for 2D Square, 3D Cubic and a more complex and realistic 3D FCC (Face Centered Cubic) lattice models. Subsequently, the knowledge of this estimated core is incorporated in an MA. The experiments conducted using HP benchmark sequences for 2D Square, 3D Cubic and 3D FCC lattice models show that the proposed MA with the new core-based population initialization technique has superior performance to the existing methods in terms of convergence speed as well as minimal energy. © 2018 Elsevier B.V.

New gene selection algorithm using hypeboxes to improve performance of classifiers

Tue 01 Nov 2022 13:31:24 AEDT

The use of DNA microarray technology allows to measure the expression levels of thousands of genes in one single experiment which makes possible to apply classification techniques to classify tumours. However, the large number of genes and relatively small number of tumours in gene expression datasets may (and in some cases significantly) diminish the accuracy of many classifiers. Therefore, efficient gene selection algorithms are required to identify most informative genes or groups of genes to improve the performance of classifiers. In this paper, a new gene selection algorithm is developed using marginal hyberboxes of genes or groups of genes for each tumour type. Informative genes are defined using overlaps between hyberboxes. The results on six gene expression datasets demonstrate that the proposed algorithm is able to considerably reduce the number of genes and significantly improve the performance of classifiers. © 2020 Inderscience Enterprises Ltd.

Application of adaptive phase-field scaled boundary finite element method for functionally graded materials

Tue 01 Jun 2021 13:04:38 AEST

In this paper, an adaptive phase-field scaled boundary finite element method for fracture in functionally graded material (FGM) is presented. The model accounts for spatial variation in the material and fracture properties. The quadtree decomposition is adopted for refinement, and the refinement is based on an error indicator evaluated directly from the solutions of the scaled boundary finite element method. This combination makes it a suitable choice to study fracture using the phase field method, as it reduces the mesh burden. A few standard benchmark numerical examples are solved to demonstrate the improvement in computational efficiency in terms of the number of degrees of freedom. © 2021 World Scientific Publishing Company.

A distributed and anonymous data collection framework based on multilevel edge computing architecture

Thu 29 Sep 2022 16:59:22 AEST

Industrial Internet of Things applications demand trustworthiness in terms of quality of service (QoS), security, and privacy, to support the smooth transmission of data. To address these challenges, in this article, we propose a distributed and anonymous data collection (DaaC) framework based on a multilevel edge computing architecture. This framework distributes captured data among multiple level-one edge devices (LOEDs) to improve the QoS and minimize packet drop and end-to-end delay. Mobile sinks are used to collect data from LOEDs and upload to cloud servers. Before data collection, the mobile sinks are registered with a level-two edge-device to protect the underlying network. The privacy of mobile sinks is preserved through group-based signed data collection requests. Experimental results show that our proposed framework improves QoS through distributed data transmission. It also helps in protecting the underlying network through a registration scheme and preserves the privacy of mobile sinks through group-based data collection requests. © 2005-2012 IEEE.

Optimal placement of synchronized voltage traveling wave sensors in a radial distribution network

Thu 26 Aug 2021 14:46:31 AEST

A transmission line fault generates transient high frequency travelling waves (TWs) that propagate through the entire network. The fault location can be determined by recording the instants at which the incident waves arrive at various points in the network. In single end-based methods, the incident wave arrival time and its subsequent reflections from the fault point are used to identify the fault location. In heavily branched distribution networks, the magnitude of the traveling wave declines rapidly as it passes through multiple junctions that cause reflection and refraction to the signal. Therefore, detecting the first incident wave from a high impedance fault is a significant challenge in the electrical distribution networks, in particular, subsequent reflections from a temporarily fault may not be possible. Therefore, to identify a high impedance or temporary faults in a distribution network with many branches, loads, switching devices and distributed transformers, multiple observers are required to observe the entire network. A fully observable and locatable network requires at least one observer per branch or spur which is not a cost effective solution. This paper proposes a reasonable number of relatively low-cost voltage TW observers with GPS time-synchronization and radio communication to detect and timestamp the TW arrival at several points in the network. In this regard, a method to optimally place a given number of TW detectors to maximize the network observability and locatability is presented. Results show the robustness of the proposed method to detect high impedance and intermittent faults within distribution networks with a minimum number of observers. © 2013 IEEE.

Examination of effective VAr with respect to dynamic voltage stability in renewable rich power grids

Thu 26 Aug 2021 12:05:36 AEST

High penetrations of inverter-based renewable resources (IBRs) diminish the resilience that traditional power systems had due to constant research and developments for many years. In particular, dynamic voltage stability becomes one of the major concerns for transmission system operators due to the limited capabilities of IBRs (i.e., voltage and frequency regulation). A heavily loaded renewable-rich network is susceptible to fault-induced delayed voltage recovery (FIDVR) due to insufficient effective reactive power (E-VAr) in power grids. Hence, it is crucial to thoroughly scrutinize each VAr resources' participation in E-VAr under various operating conditions. Moreover, it is essential to investigate the influence of E-VAr on system post-fault performance. The E-VAr investigation would help in determining the optimal location and sizing of grid-connected IBRs and allow more renewable energy integration. Furthermore, it would enrich decision-making about adopting additional grid support devices. In this paper, a comprehensive assessment framework is utilized to assess the E-VAr of a power system with a large-scale photovoltaic power. Plant under different realistic operating conditions. Several indices quantifying the contribution of VAr resources and load bus voltage recovery assists to explore the transient response and voltage trajectories. The recovery indices help have a better understanding of the factors affecting E-VAr. The proposed framework has been tested in the New England (IEEE 39 bus system) through simulation by DIgSILENT Power Factory. © 2013 IEEE.

Cyberattack triage using incremental clustering for intrusion detection systems

Thu 25 Nov 2021 11:38:05 AEDT

Intrusion detection systems (IDSs) are devices or software applications that monitor networks or systems for malicious activities and signals alerts/alarms when such activity is discovered. However, an IDS may generate many false alerts which affect its accuracy. In this paper, we develop a cyberattack triage algorithm to detect these alerts (so-called outliers). The proposed algorithm is designed using the clustering, optimization and distance-based approaches. An optimization-based incremental clustering algorithm is proposed to find clusters of different types of cyberattacks. Using a special procedure, a set of clusters is divided into two subsets: normal and stable clusters. Then, outliers are found among stable clusters using an average distance between centroids of normal clusters. The proposed algorithm is evaluated using the well-known IDS data sets—Knowledge Discovery and Data mining Cup 1999 and UNSW-NB15—and compared with some other existing algorithms. Results show that the proposed algorithm has a high detection accuracy and its false negative rate is very low. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.

A Survey on Behavioral Pattern Mining from Sensor Data in Internet of Things

Thu 25 Nov 2021 11:18:25 AEDT

The deployment of large-scale wireless sensor networks (WSNs) for the Internet of Things (IoT) applications is increasing day-by-day, especially with the emergence of smart city services. The sensor data streams generated from these applications are largely dynamic, heterogeneous, and often geographically distributed over large areas. For high-value use in business, industry and services, these data streams must be mined to extract insightful knowledge, such as about monitoring (e.g., discovering certain behaviors over a deployed area) or network diagnostics (e.g., predicting faulty sensor nodes). However, due to the inherent constraints of sensor networks and application requirements, traditional data mining techniques cannot be directly used to mine IoT data streams efficiently and accurately in real-time. In the last decade, a number of works have been reported in the literature proposing behavioral pattern mining algorithms for sensor networks. This paper presents the technical challenges that need to be considered for mining sensor data. It then provides a thorough review of the mining techniques proposed in the recent literature to mine behavioral patterns from sensor data in IoT, and their characteristics and differences are highlighted and compared. We also propose a behavioral pattern mining framework for IoT and discuss possible future research directions in this area. © 2013 IEEE.

Venue topic model-enhanced joint graph modelling for citation recommendation in scholarly big data

Thu 25 Nov 2021 11:04:52 AEDT

Natural language processing technologies, such as topic models, have been proven to be effective for scholarly recommendation tasks with the ability to deal with content information. Recently, venue recommendation is becoming an increasingly important research task due to the unprecedented number of publication venues. However, traditional methods focus on either the author's local network or author-venue similarity, where the multiple relationships between scholars and venues are overlooked, especially the venue-venue interaction. To solve this problem, we propose an author topic model-enhanced joint graph modeling approach that consists of venue topic modeling, venue-specific topic influence modeling, and scholar preference modeling. We first model the venue topic with Latent Dirichlet Allocation. Then, we model the venue-specific topic influence in an asymmetric and low-dimensional way by considering the topic similarity between venues, the top-influence of venues, and the top-susceptibility of venues. The top-influence characterizes venues' capacity of exerting topic influence on other venues. The top-susceptibility captures venues' propensity of being topically influenced by other venues. Extensive experiments on two real-world datasets show that our proposed joint graph modeling approach outperforms the state-of-The-Art methods. © 2020 ACM.

Privacy protection and energy optimization for 5G-aided industrial internet of things

Thu 25 Aug 2022 14:46:48 AEST

The 5G is expected to revolutionize every sector of life by providing interconnectivity of everything everywhere at high speed. However, massively interconnected devices and fast data transmission will bring the challenge of privacy as well as energy deficiency. In today's fast-paced economy, almost every sector of the economy is dependent on energy resources. On the other hand, the energy sector is mainly dependent on fossil fuels and is constituting about 80% of energy globally. This massive extraction and combustion of fossil fuels lead to a lot of adverse impacts on health, environment, and economy. The newly emerging 5G technology has changed the existing phenomenon of life by connecting everything everywhere using IoT devices. 5G enabled IIoT devices has transformed everything from traditional to smart, e.g. smart city, smart healthcare, smart industry, smart manufacturing etc. However, massive I/O technologies for providing D2D connection has also created the issue of privacy that need to be addressed. Privacy is the fundamental right of every individual. 5G industries and organizations need to preserve it for their stability and competency. Therefore, privacy at all three levels (data, identity and location) need to be maintained. Further, energy optimization is a big challenge that needs to be addressed for leveraging the potential benefits of 5G and 5G aided IIoT. Billions of IIoT devices that are expected to communicate using the 5G network will consume a considerable amount of energy while energy resources are limited. Therefore, energy optimization is a future challenge faced by 5G industries that need to be addressed. To fill these gaps, we have provided a comprehensive framework that will help energy researchers and practitioners in better understanding of 5G aided industry 4.0 infrastructure and energy resource optimization by improving privacy. The proposed framework is evaluated using case studies and mathematical modelling. © 2020 Institute of Electrical and Electronics Engineers Inc.. All rights reserved.

Network representation learning: From traditional feature learning to deep learning

Thu 25 Aug 2022 14:45:03 AEST

Network representation learning (NRL) is an effective graph analytics technique and promotes users to deeply understand the hidden characteristics of graph data. It has been successfully applied in many real-world tasks related to network science, such as social network data processing, biological information processing, and recommender systems. Deep Learning is a powerful tool to learn data features. However, it is non-trivial to generalize deep learning to graph-structured data since it is different from the regular data such as pictures having spatial information and sounds having temporal information. Recently, researchers proposed many deep learning-based methods in the area of NRL. In this survey, we investigate classical NRL from traditional feature learning method to the deep learning-based model, analyze relationships between them, and summarize the latest progress. Finally, we discuss open issues considering NRL and point out the future directions in this field. © 2020 Institute of Electrical and Electronics Engineers Inc.. All rights reserved.

Missing value imputation via clusterwise linear regression

Thu 24 Nov 2022 14:08:28 AEDT

In this paper a new method of preprocessing incomplete data is introduced. The method is based on clusterwise linear regression and it combines two well-known approaches for missing value imputation: linear regression and clustering. The idea is to approximate missing values using only those data points that are somewhat similar to the incomplete data point. A similar idea is used also in clustering based imputation methods. Nevertheless, here the linear regression approach is used within each cluster to accurately predict the missing values, and this is done simultaneously to clustering. The proposed method is tested using some synthetic and real-world data sets and compared with other algorithms for missing value imputations. Numerical results demonstrate that the proposed method produces the most accurate imputations in MCAR and MAR data sets with a clear structure and the percentages of missing data no more than 25%

Efficient high-resolution video compression scheme using background and foreground layers

Thu 24 Mar 2022 09:49:05 AEDT

Video coding using dynamic background frame achieves better compression compared to the traditional techniques by encoding background and foreground separately. This process reduces coding bits for the overall frame significantly; however, encoding background still requires many bits that can be compressed further for achieving better coding efficiency. The cuboid coding framework has been proven to be one of the most effective methods of image compression which exploits homogeneous pixel correlation within a frame and has better alignment with object boundary compared to traditional block-based coding. In a video sequence, the cuboid-based frame partitioning varies with the changes of the foreground. However, since the background remains static for a group of pictures, the cuboid coding exploits better spatial pixel homogeneity. In this work, the impact of cuboid coding on the background frame for high-resolution videos (Ultra-High-Definition (UHD) and 360-degree videos) is investigated using the multilayer framework of SHVC. After the cuboid partitioning, the method of coarse frame generation has been improved with a novel idea by keeping human-visual sensitive information. Unlike the traditional SHVC scheme, in the proposed method, cuboid coded background and the foreground are encoded in separate layers in an implicit manner. Simulation results show that the proposed video coding method achieves an average BD-Rate reduction of 26.69% and BD-PSNR gain of 1.51 dB against SHVC with significant encoding time reduction for both UHD and 360 videos. It also achieves an average of 13.88% BD-Rate reduction and 0.78 dB BD-PSNR gain compared to the existing relevant method proposed by X. Hoang Van. © 2013 IEEE.

Privacy-aware data fusion and prediction with spatial-temporal context for smart city industrial environment

Thu 20 Oct 2022 14:27:37 AEDT

As one of the cyber-physical-social systems that plays a key role in people's daily activities, a smart city is producing a considerable amount of industrial data associated with transportation, healthcare, business, social activities, and so on. Effectively and efficiently fusing and mining such data from multiple sources can contribute much to the development and improvements of various smart city applications. However, the industrial data collected from the smart city are often sensitive and contain partial user privacy such as spatial-temporal context information. Therefore, it is becoming a necessity to secure user privacy hidden in the smart city data before these data are integrated together for further mining, analyses, and prediction. However, due to the inherent tradeoff between data privacy and data availability, it is often a challenging task to protect users' context privacy while guaranteeing accurate data analysis and prediction results after data fusion. Considering this challenge, a novel privacy-aware data fusion and prediction approach for the smart city industrial environment is put forward in this article, which is based on the classic locality-sensitive hashing technique. At last, our proposal is evaluated by a set of experiments based on a real-world dataset. Experimental results show better prediction performances of our approach compared to other competitive ones. © 2005-2012 IEEE. *Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Shaoning Pang” is provided in this record**

A unified model predictive voltage and current control for microgrids with distributed fuzzy cooperative secondary control

Thu 18 May 2023 15:07:42 AEST

A microgrid formed by a cluster of parallel distributed generation (DG) units is capable of operating in either islanded mode or grid-connected mode. Traditionally, by using model predictive control algorithms, these two operation modes can be achieved with two separate and different cost functions, which brings in control complexity and hence, compromises system reliability. In this article, a unified model predictive voltage and current control strategy is proposed for both islanded and grid-connected operations and their smooth transition. The cost function is kept unified with voltage and current taken into account without altering the control architecture. It can be used for high-quality voltage supply at the primary control level and for bidirectional power flow at the tertiary control level. In addition, by only using DGs' own and neighboring information, a distributed fuzzy cooperative algorithm is developed at the secondary layer to mitigate the voltage and frequency deviations inherent from the power droop. The fuzzy controller can optimize the secondary control coefficients for further voltage quality improvement. Comprehensive tests under various scenarios demonstrate the merits of the proposed control strategy over traditional methods.

Unidirectional ablation minimizes unwanted thermal damage and promotes better thermal ablation efficacy in time-based switching bipolar radiofrequency ablation

Thu 17 Nov 2022 15:08:09 AEDT

Switching bipolar radiofrequency ablation (bRFA) is a thermal treatment modality used for liver cancer treatment that is capable of producing larger, more confluent and more regular thermal coagulation. When implemented in the no-touch mode, switching bRFA can prevent tumour track seeding; a medical phenomenon defined by the deposition of cancer cells along the insertion track. Nevertheless, the no-touch mode was found to yield significant unwanted thermal damage as a result of the electrodes’ position outside the tumour. It is postulated that the unwanted thermal damage can be minimized if ablation can be directed such that it focuses only within the tumour domain. As it turns out, this can be achieved by partially insulating the active tip of the RF electrodes such that electric current flows in and out of the tissue only through the non-insulated section of the electrode. This concept is known as unidirectional ablation and has been shown to produce the desired effect in monopolar RFA. In this paper, computational models based on a well-established mathematical framework for modelling RFA was developed to investigate if unidirectional ablation can minimize unwanted thermal damage during time-based switching bRFA. From the numerical results, unidirectional ablation was shown to produce treatment efficacy of nearly 100%, while at the same time, minimizing the amount of unwanted thermal damage. Nevertheless, this effect was observed only when the switch interval of the time-based protocol was set to 50 s. An extended switch interval negated the benefits of unidirectional ablation. © 2021 Elsevier Ltd

An efficient force-feedback hand exoskeleton for haptic applications

Thu 17 Nov 2022 14:53:56 AEDT

In this paper, a study on wearable exoskeleton devices which are capable of delivering sensation to the fingers while interacting with the virtual objects in virtual reality environment has been conducted. A force-controllable hand exoskeleton system is proposed, which is able to apply force feedback to the fingertip while allowing natural finger motions. The linkage structure was inspired by the skeletal structure of a human finger. Moreover, a series elastic actuator (SEA) mechanism, which consisted of a linear motor, a spring and a potentiometer, was presented as an actuating system. The force transmission through linkage has been investigated to ensure the force feedback ability at the fingertip. By using a PID controller, the proposed actuator module could generate the desired force in two different modes: free mode and interaction mode. The experimental results show that the proposed system could effectively deliver forces to the fingertips. © 2021, The Author(s), under exclusive licence to Springer Nature Singapore Pte Ltd.

Fuzzy logic and gradient descent-based optimal adaptive robust controller with inverted pendulum verification

Thu 17 Nov 2022 09:21:40 AEDT

This paper develops an adaptive robust combination of feedback linearization (FL) and sliding mode controller (SMC) based on fuzzy rules and gradient descent laws. The new suggested control algorithm is tested to stabilize a fourth-order under-actuated nonlinear inverted pendulum system. More precisely, the reliable feedback linearization approach and the robust SMC controller are combined to design a stable control effort. In order to enhance the performance of the suggested controller, an adaptation technique as long as fuzzy rules are applied to update the control gains and the boundary layer parameter. Then, a novel evolutionary algorithm termed multi-objective ant lion optimizer (MOALO) is implemented to determine the control coefficients. The analysis and results conducted on the inverted pendulum system demonstrate the desired performance of the proposed control scheme by providing an optimal smooth control input, suitable tracking performance, and proper time responses. © 2021 Elsevier Ltd

Adaptive droop control using adaptive virtual impedance for microgrids with variable PV outputs and load demands

Thu 17 Nov 2022 09:18:53 AEDT

In microgrids, intermittency of renewable energy sources (RES) and uncertain state-of-charge (SoC) of energy storage systems (ESS) can cause power deficiency to some distributed generation units (DGs). In this case, DGs with power deficiency may not meet the power demand, resulting in voltage collapse or frequency divergence. Unfortunately, this is seldom considered in inverter control design in existing literature. Thus, in-depth investigation into the microgrid performance under renewable energy resource fluctuations and appropriate control methods are urgently needed. In this article, an adaptive droop and adaptive virtual impedance control strategy is proposed. Unlike conventional droop control where the droop coefficients are fixed by assuming the DGs can always meet the load demand, the droop coefficients here are adjusted according to actual solar PV power output. In this way, proper power sharing among DGs can be achieved under renewable energy variation. Furthermore, the impact of varying DG capacities on system stability is mathematically investigated. An adaptive virtual impedance is then incorporated into the adaptive droop method to deal with the system instability caused by renewable energy variations. The proposed strategy is analyzed theoretically and validated in MATLAB/Simulink simulation and laboratory experiments. The results demonstrate the advantages of the proposed method over conventional approaches under various scenarios. © 1982-2012 IEEE.

Forced oscillation in power systems with converter controlled-based resources- a survey with case studies

Thu 17 Mar 2022 12:30:05 AEDT

In future power systems, conventional synchronous generators will be replaced by converter controlled-based generations (CCGs), i.e., wind and solar generations, and battery energy storage systems. Thus, the paradigm shift in power systems will lead to the inferior system strength and inertia scarcity. Therefore, the problems of forced oscillation (FO) will emerge with new features of the CCGs. The state-of-the-art review in this paper emphasizes previous strategies for FO detection, source identification, and mitigation. Moreover, the effect of FO is investigated in a power system with CCGs. In its conclusion, this paper also highlights important findings and provides suggestions for subsequent research in this important topic of future power systems. © 2013 IEEE.

Potential-based multiobjective reinforcement learning approaches to low-impact agents for AI safety

Thu 13 Apr 2023 14:39:07 AEST

The concept of impact-minimisation has previously been proposed as an approach to addressing the safety concerns that can arise from utility-maximising agents. An impact-minimising agent takes into account the potential impact of its actions on the state of the environment when selecting actions, so as to avoid unacceptable side-effects. This paper proposes and empirically evaluates an implementation of impact-minimisation within the framework of multiobjective reinforcement learning. The key contributions are a novel potential-based approach to specifying a measure of impact, and an examination of a variety of non-linear action-selection operators so as to achieve an acceptable trade-off between achieving the agent's primary task and minimising environmental impact. These experiments also highlight a previously unreported issue with noisy estimates for multiobjective agents using non-linear action-selection, which has broader implications for the application of multiobjective reinforcement learning. © 2021

A secured framework for SDN-based edge computing in IoT-enabled healthcare system

Thu 11 Nov 2021 11:13:48 AEDT

The Internet of Things (IoT) consists of resource-constrained smart devices capable to sense and process data. It connects a huge number of smart sensing devices, i.e., things, and heterogeneous networks. The IoT is incorporated into different applications, such as smart health, smart home, smart grid, etc. The concept of smart healthcare has emerged in different countries, where pilot projects of healthcare facilities are analyzed. In IoT-enabled healthcare systems, the security of IoT devices and associated data is very important, whereas Edge computing is a promising architecture that solves their computational and processing problems. Edge computing is economical and has the potential to provide low latency data services by improving the communication and computation speed of IoT devices in a healthcare system. In Edge-based IoT-enabled healthcare systems, load balancing, network optimization, and efficient resource utilization are accurately performed using artificial intelligence (AI), i.e., intelligent software-defined network (SDN) controller. SDN-based Edge computing is helpful in the efficient utilization of limited resources of IoT devices. However, these low powered devices and associated data (private sensitive data of patients) are prone to various security threats. Therefore, in this paper, we design a secure framework for SDN-based Edge computing in IoT-enabled healthcare system. In the proposed framework, the IoT devices are authenticated by the Edge servers using a lightweight authentication scheme. After authentication, these devices collect data from the patients and send them to the Edge servers for storage, processing, and analyses. The Edge servers are connected with an SDN controller, which performs load balancing, network optimization, and efficient resource utilization in the healthcare system. The proposed framework is evaluated using computer-based simulations. The results demonstrate that the proposed framework provides better solutions for IoT-enabled healthcare systems. © 2013 IEEE. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Venki Balasubramaniam” is provided in this record**

A lightweight integrity protection scheme for low latency smart grid applications

Thu 09 Dec 2021 15:56:51 AEDT

The substation communication protocol used in smart grid allows the transmission of messages without integrity protection for applications that require very low communication latency. This leaves the real-time measurements taken by phasor measurement units (PMUs) vulnerable to man-in-the-middle attacks, and hence makes high voltage to medium voltage (HV/MV) substations vulnerable to cyber-attacks. In this paper, a lightweight and secure integrity protection algorithm has been proposed to maintain the integrity of PMU data, which fills the missing integrity protection in the IEC 61850-90-5 standard, when the MAC identifier is declared 0. The rigorous security analysis proves the security of the proposed integrity protection method against ciphertext-only attacks and known/chosen plaintext attacks. A comparison with existing integrity protection methods shows that our method is much faster, and is also the only integrity protection scheme that meets the strict timing requirement. Not only the proposed method can be used in power protection applications, but it also can be used in emerging anomaly detection scenarios, where a fast integrity check coupled with low latency communications is used for multiple rounds of message exchanges. This paper is an extension of work originally reported in Proceedings of 14th International Conference on Security and Cryptography (Jolfaei and Kant, 2017).

Reusing artifact-centric business process models : a behavioral consistent specialization approach

Thu 09 Dec 2021 15:23:36 AEDT

Process reuse is one of the important research areas that address efficiency issues in business process modeling. Similar to software reuse, business processes should be able to be componentized and specialized in order to enable flexible process expansion and customization. Current activity/control-flow centric workflow modeling approaches face difficulty in supporting highly flexible process reuse, limited by their procedural nature. In comparison, the emerging artifact-centric workflow modeling approach well fits into these reuse requirements. Beyond the classic class level reuse in existing object-oriented approaches, process reuse faces the challenge of handling synchronization dependencies among artifact lifecycles as parts of a business process. In this article, we propose a theoretical framework for business process specialization that comprises an artifact-centric business process model, a set of methods to design and construct a specialized business process model from a base model, and a set of behavioral consistency criteria to help check the consistency between the two process models. © 2020, Springer-Verlag GmbH Austria, part of Springer Nature.

Mobility based network lifetime in wireless sensor networks: A review

Thu 07 Jul 2022 14:39:49 AEST

Increasingly emerging technologies in micro-electromechanical systems and wireless communications allows mobile wireless sensor networks (MWSNs) to be a more and more powerful mean in many applications such as habitat and environmental monitoring, traffic observing, battlefield surveillance, smart homes and smart cities. Nevertheless, due to sensor battery constraints, energy-efficiently operating an MWSN is paramount importance in those applications; and a plethora of approaches have been proposed to elongate the network longevity at most possible. Therefore, this paper provides a comprehensive review on the developed methods that exploit mobility of sensor nodes and/or sink(s) to effectively maximize the lifetime of an MWSN. The survey systematically classifies the algorithms into categories where the MWSN is equipped with mobile sensor nodes, one mobile sink or multiple mobile sinks. How to drive the mobile sink(s) for energy efficiency in the network is also fully reviewed and reported. © 2020

A scalable framework for healthcare monitoring application using the Internet of Medical Things

Thu 02 Jun 2022 14:52:58 AEST

Internet of Things (IoT) is finding application in many areas, particularly in health care where an IoT can be effectively used in the form of an Internet of Medical Things (IoMT) to monitor the patients remotely. The quality of life of the patients and health care outcomes can be improved with the deployment of an IoMT because health care professionals can monitor conditions; access the electronic medical records and communicates with each other. This remote monitoring and consultations might reduce the traditional stressful and costly exercise of frequent hospitalization. Also, the rising costs of health care in many developed countries have influenced the introduction of the Healthcare Monitoring Application (HMA) to their existing health care practices. To materialize the HMA concepts for successful deployment for civilian and commercial use with ease, application developers can benefit from a generic, scalable framework that provides significant components for building an HMA. In this chapter, a generic maintainable HMA is advanced by amalgamating the advantages of event-driven and the layered architecture. The proposed framework is used to establish an HMA with an end-to-end Assistive Care Loop Framework (ACLF) to provide a real-time alarm and assistance to monitor pregnant women. © 2020 John Wiley & Sons, Ltd.

Rectified softmax loss with all-sided cost sensitivity for age estimation

Thu 02 Dec 2021 16:23:57 AEDT

In Convolutional Neural Network (ConvNet) based age estimation algorithms, softmax loss is usually chosen as the loss function directly, and the problems of Cost Sensitivity (CS), such as class imbalance and misclassification cost difference between different classes, are not considered. Focus on these problems, this paper constructs a rectified softmax loss function with all-sided CS, and proposes a novel cost-sensitive ConvNet based age estimation algorithm. Firstly, a loss function is established for each age category to solve the imbalance of the number of training samples. Then, a cost matrix is defined to reflect the cost difference caused by misclassification between different classes, thus constructing a new cost-sensitive error function. Finally, the above methods are merged to construct a rectified softmax loss function for ConvNet model, and a corresponding Back Propagation (BP) training scheme is designed to enable ConvNet network to learn robust face representation for age estimation during the training phase. Simultaneously, the rectified softmax loss is theoretically proved that it satisfies the general conditions of the loss function used for classification. The effectiveness of the proposed method is verified by experiments on face image datasets of different races. © 2013 IEEE.

Online dispute resolution in mediating EHR disputes : a case study on the impact of emotional intelligence

Thu 02 Dec 2021 16:07:49 AEDT

An Electronic Health Record (EHR) is an individual’s record of all health events that enables critical information to be documented and shared electronically amongst health care providers and patients. The introduction of an EHR, particularly a patient-accessible EHR, can be expected to lead to an escalation of enquiries, complaints and ultimately, disputes. Prevailing opinion is that Online Dispute Resolution (ODR) systems can help with the mediation of certain types of disputes electronically, particularly systems which deploy Artificial Intelligence (AI) to reduce the need for a human mediator. However, disputes regarding health tend to invoke emotional responses from patients that may conceivably impact ODR efficacy. This raises an interesting question on the influence of emotional intelligence (EI) in the process of mediation. Using a phenomenological research methodology simulating doctor–patient disputes mediated with an AI Smart ODR system in place of a human mediator, we found an association between EI and the propensity for a participant to change their previously asserted claims. Our results indicate participants with lower EI tend to prolong resolution compared to those with higher EI. Future research include trialling larger scale ODR systems for specific cohorts of patients in the area of health related dispute resolution are advanced. © 2019 Informa UK Limited, trading as Taylor & Francis Group.

TOSNet : a topic-based optimal subnetwork identification in academic networks

Thu 01 Jul 2021 14:53:44 AEST

Subnetwork identification plays a significant role in analyzing, managing, and comprehending the structure and functions in big networks. Numerous approaches have been proposed to solve the problem of subnetwork identification as well as community detection. Most of the methods focus on detecting communities by considering node attributes, edge information, or both. This study focuses on discovering subnetworks containing researchers with similar or related areas of interest or research topics. A topic- aware subnetwork identification is essential to discover potential researchers on particular research topics and provide qualitywork. Thus, we propose a topic-based optimal subnetwork identification approach (TOSNet). Based on some fundamental characteristics, this paper addresses the following problems: 1)How to discover topic-based subnetworks with a vigorous collaboration intensity? 2) How to rank the discovered subnetworks and single out one optimal subnetwork? We evaluate the performance of the proposed method against baseline methods by adopting the modularity measure, assess the accuracy based on the size of the identified subnetworks, and check the scalability for different sizes of benchmark networks. The experimental findings indicate that our approach shows excellent performance in identifying contextual subnetworks that maintain intensive collaboration amongst researchers for a particular research topic. © 2020 Institute of Electrical and Electronics Engineers Inc.. All rights reserved.

RaSEC : an intelligent framework for reliable and secure multilevel edge computing in industrial environments

Mon 25 Jul 2022 13:33:08 AEST

Industrial applications generate big data with redundant information that is transmitted over heterogeneous networks. The transmission of big data with redundant information not only increases the overall end-to-end delay but also increases the computational load on servers which affects the performance of industrial applications. To address these challenges, we propose an intelligent framework named Reliable and Secure multi-level Edge Computing (RaSEC), which operates in three phases. In the first phase, level-one edge devices apply a lightweight aggregation technique on the generated data. This technique not only reduces the size of the generated data but also helps in preserving the privacy of data sources. In the second phase, a multistep process is used to register level-two edge devices (LTEDs) with high-level edge devices (HLEDs). Due to the registration process, only legitimate LTEDs can forward data to the HLEDs, and as a result, the computational load on HLEDs decreases. In the third phase, the HLEDs use a convolutional neural network to detect the presence of moving objects in the data forwarded by LTEDs. If a movement is detected, the data is uploaded to the cloud servers for further analysis; otherwise, the data is discarded to minimize the use of computational resources on cloud computing platforms. The proposed framework reduces the response time by forwarding useful information to the cloud servers and can be utilized by various industrial applications. Our theoretical and experimental results confirm the resiliency of our framework with respect to security and privacy threats. © 1972-2012 IEEE.

Reduced switch multilevel inverter topologies for renewable energy sources

Mon 24 Jan 2022 15:46:14 AEDT

This article proposes two generalized multilevel inverter configurations that reduce the number of switching devices, isolated DC sources, and total standing voltage on power switches, making them suitable for renewable energy sources. The main topology is a multilevel inverter that handles two isolated DC sources with ten power switches to create 25 voltage levels. Based on the main proposed topology, two generalized multilevel inverters are introduced to provide flexibility in the design and to minimize the number of elements. The optimal topologies for both extensive multilevel inverters are derived from different design objectives such as minimizing the number of elements (gate drivers, DC sources), achieving a large number of levels, and minimizing the total standing voltage. The main advantages of the proposed topologies are a reduced number of elements compared to those required by other existing multilevel inverter topologies. The power loss analysis and standalone PV application of the proposed topologies are discussed. Experimental results are presented for the proposed topology to demonstrate its correct operation. © 2013 IEEE.

Comparisons between impedance-based and time-based switching bipolar radiofrequency ablation for the treatment of liver cancer

Mon 18 Oct 2021 16:35:19 AEDT

Switching bipolar radiofrequency ablation (bRFA) is a cancer treatment technique that activates multiple pairs of electrodes alternately based on a predefined criterion. Various criteria can be used to trigger the switch, such as time (ablation duration) and tissue impedance. In a recent study on time-based switching bRFA, it was determined that a shorter switch interval could produce better treatment outcome than when a longer switch interval was used, which reduces tissue charring and roll-off induced cooling. In this study, it was hypothesized that a more efficacious bRFA treatment can be attained by employing impedance-based switching. This is because ablation per pair can be maximized since there will be no interruption to RF energy delivery until roll-off occurs. This was investigated using a two-compartment 3D computational model. Results showed that impedance-based switching bRFA outperformed time-based switching when the switch interval of the latter is 100 s or higher. When compared to the time-based switching with switch interval of 50 s, the impedance-based model is inferior. It remains to be investigated whether the impedance-based protocol is better than the time-based protocol for a switch interval of 50 s due to the inverse relationship between ablation and treatment efficacies. It was suggested that the choice of impedance-based or time-based switching could ultimately be patient-dependent. © 2021 Elsevier Ltd

An efficient hybrid system for anomaly detection in social networks

Mon 17 May 2021 13:51:30 AEST

Anomaly detection has been an essential and dynamic research area in the data mining. A wide range of applications including different social medias have adopted different state-of-the-art methods to identify anomaly for ensuring user’s security and privacy. The social network refers to a forum used by different groups of people to express their thoughts, communicate with each other, and share the content needed. This social networks also facilitate abnormal activities, spread fake news, rumours, misinformation, unsolicited messages, and propaganda post malicious links. Therefore, detection of abnormalities is one of the important data analysis activities for the identification of normal or abnormal users on the social networks. In this paper, we have developed a hybrid anomaly detection method named DT-SVMNB that cascades several machine learning algorithms including decision tree (C5.0), Support Vector Machine (SVM) and Naïve Bayesian classifier (NBC) for classifying normal and abnormal users in social networks. We have extracted a list of unique features derived from users’ profile and contents. Using two kinds of dataset with the selected features, the proposed machine learning model called DT-SVMNB is trained. Our model classifies users as depressed one or suicidal one in the social network. We have conducted an experiment of our model using synthetic and real datasets from social network. The performance analysis demonstrates around 98% accuracy which proves the effectiveness and efficiency of our proposed system. © 2021, The Author(s).

A new global index for short term voltage stability assessment

Mon 17 May 2021 11:52:30 AEST

The utility scale of non-conventional generators (NCGs), such as wind and photovoltaic (PV) plants, are competitive alternatives to synchronous machines (SMs) for power generation. Higher penetration of NCGs has been respondent of causing several recent incidents leading up to voltage collapse in power systems due to the distinct characteristics of NCGs under different operating conditions. Consequently, the so-called system strength has been reduced with higher NCGs penetration. A number of indices have been developed to quantify system strength from the short-term voltage stability (STVS) perspective. None of the indices capture the overall performances of power systems on dynamic voltage recovery. In this paper, an improvement in one of the STVS indices namely, the Voltage Recovery Index (VRI), is proposed to overcome shortcomings in the original index. Moreover, the improved index is globalized to establish a new index defined as system voltage recovery index (VRIsys) to quantify STVS at the system level. The amended VRI and developed VRIsys are used in systematic simulations to quantify the impact and interaction of various factors that could affect system strength. The assessment was conducted using time-domain simulation with direct connected induction motors (DCIMs) and a proliferation of converter-based technologies on both the generation and load sides, namely, NCGs and Variable Speed Drives (VSDs), respectively. © 2013 IEEE.

Adversarial network with multiple classifiers for open set domain adaptation

Mon 13 Dec 2021 16:00:13 AEDT

Domain adaptation aims to transfer knowledge from a domain with adequate labeled samples to a domain with scarce labeled samples. Prior research has introduced various open set domain adaptation settings in the literature to extend the applications of domain adaptation methods in real-world scenarios. This paper focuses on the type of open set domain adaptation setting where the target domain has both private ('unknown classes') label space and the shared ('known classes') label space. However, the source domain only has the 'known classes' label space. Prevalent distribution-matching domain adaptation methods are inadequate in such a setting that demands adaptation from a smaller source domain to a larger and diverse target domain with more classes. For addressing this specific open set domain adaptation setting, prior research introduces a domain adversarial model that uses a fixed threshold for distinguishing known from unknown target samples and lacks at handling negative transfers. We extend their adversarial model and propose a novel adversarial domain adaptation model with multiple auxiliary classifiers. The proposed multi-classifier structure introduces a weighting module that evaluates distinctive domain characteristics for assigning the target samples with weights which are more representative to whether they are likely to belong to the known and unknown classes to encourage positive transfers during adversarial training and simultaneously reduces the domain gap between the shared classes of the source and target domains. A thorough experimental investigation shows that our proposed method outperforms existing domain adaptation methods on a number of domain adaptation datasets. © 1999-2012 IEEE.

Canonical duality theory and algorithm for solving bilevel knapsack problems with applications

Mon 12 Apr 2021 13:30:15 AEST

A novel canonical duality theory (CDT) is presented for solving general bilevel mixed integer nonlinear optimization governed by linear and quadratic knapsack problems. It shows that the challenging knapsack problems can be solved analytically in term of their canonical dual solutions. The existence and uniqueness of these analytical solutions are proved. NP-hardness of the knapsack problems is discussed. A powerful CDT algorithm combined with an alternative iteration and a volume reduction method is proposed for solving the NP-hard bilevel knapsack problems. Application is illustrated by benchmark problems in optimal topology design. The performance and novelty of the proposed method are compared with the popular commercial codes. © 2013 IEEE.

Shifu2 : a network representation learning based model for advisor-advisee relationship mining

Mon 07 Jun 2021 10:42:30 AEST

The advisor-advisee relationship represents direct knowledge heritage, and such relationship may not be readily available from academic libraries and search engines. This work aims to discover advisor-advisee relationships hidden behind scientific collaboration networks. For this purpose, we propose a novel model based on Network Representation Learning (NRL), namely Shifu2, which takes the collaboration network as input and the identified advisor-advisee relationship as output. In contrast to existing NRL models, Shifu2 considers not only the network structure but also the semantic information of nodes and edges. Shifu2 encodes nodes and edges into low-dimensional vectors respectively, both of which are then utilized to identify advisor-advisee relationships. Experimental results illustrate improved stability and effectiveness of the proposed model over state-of-the-art methods. In addition, we generate a large-scale academic genealogy dataset by taking advantage of Shifu2. © 1989-2012 IEEE.

A critical review of intrusion detection systems in the internet of things : techniques, deployment strategy, validation strategy, attacks, public datasets and challenges

Mon 07 Jun 2021 10:21:30 AEST

The Internet of Things (IoT) has been rapidly evolving towards making a greater impact on everyday life to large industrial systems. Unfortunately, this has attracted the attention of cybercriminals who made IoT a target of malicious activities, opening the door to a possible attack on the end nodes. To this end, Numerous IoT intrusion detection Systems (IDS) have been proposed in the literature to tackle attacks on the IoT ecosystem, which can be broadly classified based on detection technique, validation strategy, and deployment strategy. This survey paper presents a comprehensive review of contemporary IoT IDS and an overview of techniques, deployment Strategy, validation strategy and datasets that are commonly applied for building IDS. We also review how existing IoT IDS detect intrusive attacks and secure communications on the IoT. It also presents the classification of IoT attacks and discusses future research challenges to counter such IoT attacks to make IoT more secure. These purposes help IoT security researchers by uniting, contrasting, and compiling scattered research efforts. Consequently, we provide a unique IoT IDS taxonomy, which sheds light on IoT IDS techniques, their advantages and disadvantages, IoT attacks that exploit IoT communication systems, corresponding advanced IDS and detection capabilities to detect IoT attacks. © 2021, The Author(s).

Big data and predictive analytics in healthcare in Bangladesh: regulatory challenges

Mon 01 Nov 2021 11:48:12 AEDT

Big data analytics and artificial intelligence are revolutionizing the global healthcare industry. As the world accumulates unfathomable volumes of data and health technology grows more and more critical to the advancement of medicine, policymakers and regulators are faced with tough challenges around data security and data privacy. This paper reviews existing regulatory frameworks for artificial intelligence-based medical devices and health data privacy in Bangladesh. The study is legal research employing a comparative approach where data is collected from primary and secondary legal materials and filtered based on policies relating to medical data privacy and medical device regulation of Bangladesh. Such policies are then compared with benchmark policies of the European Union and the USA to test the adequacy of the present regulatory framework of Bangladesh and identify the gaps in the current regulation. The study highlights the gaps in policy and regulation in Bangladesh that are hampering the widespread adoption of big data analytics and artificial intelligence in the industry. Despite the vast benefits that big data would bring to Bangladesh's healthcare industry, it lacks the proper data governance and legal framework necessary to gain consumer trust and move forward. Policymakers and regulators must work collaboratively with clinicians, patients and industry to adopt a new regulatory framework that harnesses the potential of big data but ensures adequate privacy and security of personal data. The article opens valuable insight to regulators, academicians, researchers and legal practitioners regarding the present regulatory loopholes in Bangladesh involving exploiting the promise of big data in the medical field. The study concludes with the recommendation for future research into the area of privacy as it relates to artificial intelligence-based medical devices should consult the patients' perspective by employing quantitative analysis research methodology. © 2021 The Author(s)

Narrative-based interactive learning environments from modelling reasoning

Fri 21 Jul 2023 09:59:27 AEST

Narrative and story telling has a long history of use in structuring, organising and communicating human experience. This paper describes a narrative based interactive intelligent learning environment which aims to elucidate practical reasoning using interactive emergent narratives that can be used in training novices in decision making. Its design is based on an approach to generating narrative from knowledge that has been modelled in specific decision/reasoning domains. The approach uses a narrative model that is guided partially by inference and contextual information contained in the particular knowledge representation used, the Generic/Actual argument model of structured reasoning. The approach is described with examples in the area of critical care nursing training and positive learning outcomes are reported. © International Forum of Educational Technology & Society (IFETS).

Development of flexible haptic forceps based on the electrohydraulic transmission system

Fri 15 Sep 2023 16:59:49 AEST