- Title
- Automatic building extraction from LIDAR data covering complex urban scenes
- Creator
- Awrangjeb, Mohammad; Lu, Guojun; Fraser, Clive
- Date
- 2014
- Type
- Text; Conference proceedings
- Identifier
- http://researchonline.federation.edu.au/vital/access/HandleResolver/1959.17/155284
- Identifier
- vital:11229
- Identifier
-
https://doi.org/10.5194/isprsarchives-XL-3-25-2014
- Identifier
- ISBN:2194-9034
- Abstract
- This paper presents a new method for segmentation of LIDAR point cloud data for automatic building extraction. Using the ground height from a DEM (Digital Elevation Model), the non-ground points (mainly buildings and trees) are separated from the ground points. Points on walls are removed from the set of non-ground points by applying the following two approaches: If a plane fitted at a point and its neighbourhood is perpendicular to a fictitious horizontal plane, then this point is designated as a wall point. When LIDAR points are projected on a dense grid, points within a narrow area close to an imaginary vertical line on the wall should fall into the same grid cell. If three or more points fall into the same cell, then the intermediate points are removed as wall points. The remaining non-ground points are then divided into clusters based on height and local neighbourhood. One or more clusters are initialised based on the maximum height of the points and then each cluster is extended by applying height and neighbourhood constraints. Planar roof segments are extracted from each cluster of points following a region-growing technique. Planes are initialised using coplanar points as seed points and then grown using plane compatibility tests. If the estimated height of a point is similar to its LIDAR generated height, or if its normal distance to a plane is within a predefined limit, then the point is added to the plane. Once all the planar segments are extracted, the common points between the neghbouring planes are assigned to the appropriate planes based on the plane intersection line, locality and the angle between the normal at a common point and the corresponding plane. A rule-based procedure is applied to remove tree planes which are small in size and randomly oriented. The neighbouring planes are then merged to obtain individual building boundaries, which are regularised based on long line segments. Experimental results on ISPRS benchmark data sets show that the proposed method offers higher building detection and roof plane extraction rates than many existing methods, especially in complex urban scenes.
- Relation
- ISPRS Technical Commission III Symposium; Zurich, Switzerland; 5th-7th September 2014; published in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences Vol. XL-3, p. 25-32; http://purl.org/au-research/grants/arc/DE120101778
- Rights
- Copyright © The Author(s). This is an open access article distributed under the Creative Common Attribution 3.0 License (http://creativecommons.org/licenses/by/3.0/). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
- Rights
- Open Access
- Rights
- This metadata is freely available under a CCO license
- Subject
- LIDAR; Point cloud; Segmentation; Building; Detection; Roof; Plane; Extraction
- Full Text
- Reviewed
- Hits: 4600
- Visitors: 4798
- Downloads: 242
| Thumbnail | File | Description | Size | Format | |||
|---|---|---|---|---|---|---|---|
| View Details Download | SOURCE1 | Published version | 4 MB | Adobe Acrobat PDF | View Details Download |