Description:
Timor Leste which emerged as a sovereign nation in 2002, is one of the most oil dependent countries in the world but with limited oil reserves. In 2005 it set up a Petroleum Fund to provide a stable source of revenues for the budget over the long term and to preserve intergenerational equity. Ten years later, the petroleum fund balance fell for the first time due to falling output, lower oil prices and lower returns on investment. With its oil production expected to cease in 2023 and withdrawals from the fund far exceeding the estimated sustainable income level it is imperative that revenues are spent wisely. This study focuses on examining the pattern of oil revenue expenditures and concludes that expenditures on veterans' payments and large scale infrastructure projects have thwarted the stated aims of the fund particularly that of preserving intergenerational equity. The paper concludes by examining the policy implications of the findings. •Timor is highly dependent on oil but has limited reserves.•Withdrawals from its Petroleum Fund far exceeds its estimated sustainable income.•Veterans' payments and infrastucture projects thwarted intergenerational equity.•Changes in expenditure are needed to foster intergenerational equity.
Description:
Background and objectives: Recently, there have been calls for RFA to be implemented in the bipolar mode for cancer treatment due to the benefits it offers over the monopolar mode. These include the ability to prevent skin burns at the grounding pad and to avoid tumour track seeding. The usage of bipolar RFA in clinical practice remains uncommon however, as not many research studies have been carried out on bipolar RFA. As such, there is still uncertainty in understanding the effects of the different RF probe configurations on the treatment outcome of RFA. This paper demonstrates that the electrode lengths have a strong influence on the mechanics of bipolar RFA. The information obtained here may lead to further optimization of the system for subsequent uses in the hospitals. Methods: A 2D model in the axisymmetric coordinates was developed to simulate the electro-thermophysiological responses of the tissue during a single probe bipolar RFA. Two different probe configurations were considered, namely the configuration where the active electrode is longer than the ground and the configuration where the ground electrode is longer than the active. The mathematical model was first verified with an existing experimental study found in the literature. Results: Results from the simulations showed that heating is confined only to the region around the shorter electrode, regardless of whether the shorter electrode is the active or the ground. Consequently, thermal coagulation also occurs in the region surrounding the shorter electrode. This opened up the possibility for a better customized treatment through the development of RF probes with adjustable electrode lengths. Conclusions: The electrode length was found to play a significant role on the outcome of single probe bipolar RFA. In particular, the length of the shorter electrode becomes the limiting factor that influences the mechanics of single probe bipolar RFA. Results from this study can be used to further develop and optimize bipolar RFA as an effective and reliable cancer treatment technique. (C) 2019 Elsevier B.V. All rights reserved.
Description:
The importance of outbound markets to a host country has increased scholars' interest in understanding motivational factors. Motivation is a basic determinant of tourists' behaviour and has a fundamental role in tourism. The awareness of motivational differences among tourists from main generating markets is a prerequisite for effective and successful destination marketing programs. However, cross-cultural motivation comparisons of tourists from different cultural backgrounds has received relatively little research attention. In addition, there has not been a content analysis undertaken on this topic. Therefore, the aim of this research was to examine and synthesise previous studies on cross-cultural tourist motivation comparison, reveal the gaps in the literature and indicate the future research trends. A review of 71 publications covering a period of 30 years, from 1988 to 2017, was conducted. This study focuses on both subject areas and research methods used. The findings of this content analysis identified a recent growth in cross-cultural comparison studies. The analysis also revealed an increase in more advanced analysis including multiple variables such as motivations, satisfaction, segmentation of visitors, intention behaviours, and information search behaviour. The analysis of nationalities compared in the reviewed studies indicated the shift of research interest towards Asian countries. In the case of research methods, quantitative design is more common for cross-cultural motivation studies.
Description:
The substation communication protocol used in smart grid allows the transmission of messages without integrity protection for applications that require very low communication latency. This leaves the real-time measurements taken by phasor measurement units (PMUs) vulnerable to man-in-the-middle attacks, and hence makes high voltage to medium voltage (HV/MV) substations vulnerable to cyber-attacks. In this paper, a lightweight and secure integrity protection algorithm has been proposed to maintain the integrity of PMU data, which fills the missing integrity protection in the IEC 61850-90-5 standard, when the MAC identifier is declared 0. The rigorous security analysis proves the security of the proposed integrity protection method against ciphertext-only attacks and known/chosen plaintext attacks. A comparison with existing integrity protection methods shows that our method is much faster, and is also the only integrity protection scheme that meets the strict timing requirement. Not only the proposed method can be used in power protection applications, but it also can be used in emerging anomaly detection scenarios, where a fast integrity check coupled with low latency communications is used for multiple rounds of message exchanges. This paper is an extension of work originally reported in Proceedings of 14th International Conference on Security and Cryptography (Jolfaei and Kant, 2017).
Description:
The substation communication protocol used in smart grid allows the transmission of messages without integrity protection for applications that require very low communication latency. This leaves the real-time measurements taken by phasor measurement units (PMUs) vulnerable to man-in-the-middle attacks, and hence makes high voltage to medium voltage (HV/MV) substations vulnerable to cyber-attacks. In this paper, a lightweight and secure integrity protection algorithm has been proposed to maintain the integrity of PMU data, which fills the missing integrity protection in the IEC 61850-90-5 standard, when the MAC identifier is declared 0. The rigorous security analysis proves the security of the proposed integrity protection method against ciphertext-only attacks and known/chosen plaintext attacks. A comparison with existing integrity protection methods shows that our method is much faster, and is also the only integrity protection scheme that meets the strict timing requirement. Not only the proposed method can be used in power protection applications, but it also can be used in emerging anomaly detection scenarios, where a fast integrity check coupled with low latency communications is used for multiple rounds of message exchanges. This paper is an extension of work originally reported in Proceedings of 14th International Conference on Security and Cryptography (Jolfaei and Kant, 2017).
Description:
A quadtree-polygon scaled boundary finite element-based approach for image-based modelling of concrete fracture at the mesoscale is developed. Digital images representing the two-phase mesostructure of concrete, which comprises of coarse aggregates and mortar are either generated using a take-and-place algorithm with a user-defined aggregate volume ratio or obtained from X-ray computed tomography as an input. The digital images are automatically discretised for analysis by applying a balanced quadtree decomposition in combination with a smoothing operation. The scaled boundary finite element method is applied to model the constituents in the concrete mesostructure. A quadtree formulation within the framework of the scaled boundary finite element method is advantageous in that the displacement compatibility between the cells are automatically preserved even in the presence of hanging nodes. Moreover, the geometric flexibility of the scaled boundary finite element method facilitates the use of arbitrary sided polygons, allowing better representation of the aggregate boundaries. The computational burden is significantly reduced as there are only finite number of cell types in a balanced quadtree mesh. The cells in the mesh are connected to each other using cohesive interface elements with appropriate softening laws to model the fracture of the mesostructure. Parametric studies are carried out on concrete specimens subjected to uniaxial tension to investigate the effects of various parameters e.g. aggregate size distribution, porosity and aggregate volume ratio on the fracture of concrete at the meso-scale. Mesoscale fracture of concrete specimens obtained from X-ray computed tomography scans are carried out to demonstrate its feasibility.
Description:
A quadtree-polygon scaled boundary finite element-based approach for image-based modelling of concrete fracture at the mesoscale is developed. Digital images representing the two-phase mesostructure of concrete, which comprises of coarse aggregates and mortar are either generated using a take-and-place algorithm with a user-defined aggregate volume ratio or obtained from X-ray computed tomography as an input. The digital images are automatically discretised for analysis by applying a balanced quadtree decomposition in combination with a smoothing operation. The scaled boundary finite element method is applied to model the constituents in the concrete mesostructure. A quadtree formulation within the framework of the scaled boundary finite element method is advantageous in that the displacement compatibility between the cells are automatically preserved even in the presence of hanging nodes. Moreover, the geometric flexibility of the scaled boundary finite element method facilitates the use of arbitrary sided polygons, allowing better representation of the aggregate boundaries. The computational burden is significantly reduced as there are only finite number of cell types in a balanced quadtree mesh. The cells in the mesh are connected to each other using cohesive interface elements with appropriate softening laws to model the fracture of the mesostructure. Parametric studies are carried out on concrete specimens subjected to uniaxial tension to investigate the effects of various parameters e.g. aggregate size distribution, porosity and aggregate volume ratio on the fracture of concrete at the meso-scale. Mesoscale fracture of concrete specimens obtained from X-ray computed tomography scans are carried out to demonstrate its feasibility.
Description:
Objectives: To review the incidence of abrasion injuries sustained on artificial turf playing fields and the level of evidence existing on player perceptions of abrasion injuries on these surfaces. Design: Systematic review. Method: A systematic search was performed using SPORTDiscus, Medline, Web of Science, Scopus and Science Direct databases. Inclusion criteria included: abrasion type injuries measured; conducted on artificial/synthetic turf; type of sport reported; peer-reviewed original research; English language search terms, but no language restrictions. A quality assessment was conducted using the Newcastle-Ottawa quality scale. Results: The search yielded 76 potential articles, with 25 meeting all inclusion criteria. Twenty articles were injury-based and five were perception–based. The differences in injury definition and the lack of details of the playing surfaces produced varying results on the rate of injuries on artificial turf. Regardless of the condition of the surface, the level of play, or the sport, players perceived the fear of abrasion injuries as a major disadvantage of artificial turf surfaces. Conclusions: The review highlighted the current disparity that exists between players’ perceptions of abrasion injuries and the level of evidence of abrasion injury risk on artificial turf playing surfaces. There is a need for the inclusion of greater detail of playing surfaces’ specifications and condition, and an injury definition sufficiently sensitive to better measure abrasion injury incidence and severity. Without this more detailed information, it is likely that the strongly perceived risk of abrasion injuries will continue as a barrier to the adoption of artificial playing surfaces.
Description:
Objectives: To review the incidence of abrasion injuries sustained on artificial turf playing fields and the level of evidence existing on player perceptions of abrasion injuries on these surfaces. Design: Systematic review. Method: A systematic search was performed using SPORTDiscus, Medline, Web of Science, Scopus and Science Direct databases. Inclusion criteria included: abrasion type injuries measured; conducted on artificial/synthetic turf; type of sport reported; peer-reviewed original research; English language search terms, but no language restrictions. A quality assessment was conducted using the Newcastle-Ottawa quality scale. Results: The search yielded 76 potential articles, with 25 meeting all inclusion criteria. Twenty articles were injury-based and five were perception–based. The differences in injury definition and the lack of details of the playing surfaces produced varying results on the rate of injuries on artificial turf. Regardless of the condition of the surface, the level of play, or the sport, players perceived the fear of abrasion injuries as a major disadvantage of artificial turf surfaces. Conclusions: The review highlighted the current disparity that exists between players’ perceptions of abrasion injuries and the level of evidence of abrasion injury risk on artificial turf playing surfaces. There is a need for the inclusion of greater detail of playing surfaces’ specifications and condition, and an injury definition sufficiently sensitive to better measure abrasion injury incidence and severity. Without this more detailed information, it is likely that the strongly perceived risk of abrasion injuries will continue as a barrier to the adoption of artificial playing surfaces.
Description:
Objectives: To assess the utility and functionality of the X-Patch® as a measurement tool to study head impact exposure in Australian Football. Accuracy, precision, reliability and validity were examined. Designs: Laboratory tests and prospective observational study. Methods: Laboratory tests on X-Patch® were undertaken using an instrumented Hybrid III head and neck and linear impactor. Differences between X-Patch® and reference data were analysed. Australian Football players wore the X-Patch® devices and games were video-recorded. Video recordings were analysed qualitatively for head impact events and these were correlated with X-Patch® head acceleration events. Wearability of the X-Patch® was assessed using the Comfort Rating Scale for Wearable Computers. Results: Laboratory head impacts, performed at multiple impact sites and velocities, identified significant correlations between headform-measured and device-measured kinematic parameters (p < 0.05 for all). On average, the X-Patch®-recorded peak linear acceleration (PLA) was 17% greater than the reference PLA, 28% less for peak rotational acceleration (PRA) and 101% greater for the Head Injury Criterion (HIC). For video analysis, 118 head acceleration events (HAE) were included with PLA ≥30 g across 53 players. Video recordings of X-Patch®-measured HAEs (PLA ≥30 g) determined that 31.4% were direct head impacts, 9.3% were indirect impacts, 44.1% were unknown or unclear and 15.3% were neither direct nor indirect head impacts. The X-Patch® system was deemed wearable by 95–100% of respondents. Conclusions: This study reinforces evidence that use of the current X-Patch® devices should be limited to research only and in conjunction with video analysis.
Description:
Annual ryegrass is one of the most serious, costly weeds of winter cropping systems in Australia. To determine whether its competition-mediated plant defence mechanisms effect on wheat grain quality, wheat (cv. Yitpi) and annual ryegrass were grown under two levels of CO2 (400 ppm; (a[CO2]) vs 700 ppm; (e[CO2]), two levels of water (well-watered vs drought) and two types of competition (wheat only; (W), and wheatxannual ryegrass; (W x R) with four replicates. The competitionx[CO2] interaction had a significant effect on wheat grain protein content, where it was increased in W x R under both e[CO2] (+ 17%) and a[CO2] (+ 21%). Grain yield, total grain reducing power and phenolic content were significantly affected by [CO2] x drought x competition. In a summary, annual ryegrass competition significantly altered the wheat grain quality under both [CO2] levels (depending on the soil water level), while also decreasing the grain yield.
Description:
Annual ryegrass is one of the most serious, costly weeds of winter cropping systems in Australia. To determine whether its competition-mediated plant defence mechanisms effect on wheat grain quality, wheat (cv. Yitpi) and annual ryegrass were grown under two levels of CO2 (400 ppm; (a[CO2]) vs 700 ppm; (e[CO2]), two levels of water (well-watered vs drought) and two types of competition (wheat only; (W), and wheatxannual ryegrass; (W x R) with four replicates. The competitionx[CO2] interaction had a significant effect on wheat grain protein content, where it was increased in W x R under both e[CO2] (+ 17%) and a[CO2] (+ 21%). Grain yield, total grain reducing power and phenolic content were significantly affected by [CO2] x drought x competition. In a summary, annual ryegrass competition significantly altered the wheat grain quality under both [CO2] levels (depending on the soil water level), while also decreasing the grain yield.
Description:
Arsenic (As) is an emerging contaminant on a global scale posing threat to environmental and human health. The relatively brief history of the applications of biochar and bone char has mapped the endeavors to remove As from water to a considerable extent. This critical review attempts to provide a comprehensive overview for the first time on the potential of bio- and bone-char in the immobilization of inorganic As in water. It seeks to offer a rational assessment of what is existing and what needs to be done in future research as an implication for As toxicity of human health risks through acute and chronic exposure to As contaminated water. Bio- and bone-char are recognized as promising alternatives to activated carbon due to their lower production and activation cost. The surface modification via chemical methods has been adopted to improve the adsorption capacity for anionic As species. Surface complexation, ion exchange, precipitation and electrostatic interactions are the main mechanisms involved in the adsorption of As onto the char surface. However, arsenic-bio-bone char interactions along with their chemical bonding for the removal of As in aqueous solution is still a subject of debate. Hence, the proposed mechanisms need to be scrutinized further using advanced analytical techniques such as synchrotron-based X-ray. Moving this technology from laboratory phase to field scale applications is an urgent necessity in order to establish a sustainable As mitigation in drinking water on a global scale.
Description:
Arsenic (As) is an emerging contaminant on a global scale posing threat to environmental and human health. The relatively brief history of the applications of biochar and bone char has mapped the endeavors to remove As from water to a considerable extent. This critical review attempts to provide a comprehensive overview for the first time on the potential of bio- and bone-char in the immobilization of inorganic As in water. It seeks to offer a rational assessment of what is existing and what needs to be done in future research as an implication for As toxicity of human health risks through acute and chronic exposure to As contaminated water. Bio- and bone-char are recognized as promising alternatives to activated carbon due to their lower production and activation cost. The surface modification via chemical methods has been adopted to improve the adsorption capacity for anionic As species. Surface complexation, ion exchange, precipitation and electrostatic interactions are the main mechanisms involved in the adsorption of As onto the char surface. However, arsenic-bio-bone char interactions along with their chemical bonding for the removal of As in aqueous solution is still a subject of debate. Hence, the proposed mechanisms need to be scrutinized further using advanced analytical techniques such as synchrotron-based X-ray. Moving this technology from laboratory phase to field scale applications is an urgent necessity in order to establish a sustainable As mitigation in drinking water on a global scale.
Description:
Millions of people around the world suffer from or prone to health problems caused by high concentration of fluoride in drinking water sources. One of the environmentally friendly and cost-effective ways for removing fluoride is the use of bone char. In this review, the structural properties and binding affinity of fluoride ions from different water sources was critically discussed. The effect of experimental conditions on enhancing the adsorption capacity of fluoride ions using bone char samples was addressed. It appears that surface properties, and conditions of the bone char production such as temperature and residence time play an important role in designing the optimal fluoride removal process. The optimum temperature for fluoride removal seems to be in the range of 500–700 °C and a residence time of 2 h. Applying various equilibrium adsorption isotherms for understanding fluoride adsorption mechanism was presented. The effect of bone char modification with different elements were discussed and recommendations for a further increase in the removal efficiency was proposed. Cost of bone char production and large-scale treatment systems were also discussed based on information available from scientific and commercial sources. Challenges with existing domestic defluoridation designs were highlighted and suggestions for new conceptual designs were provided.
Description:
Millions of people around the world suffer from or prone to health problems caused by high concentration of fluoride in drinking water sources. One of the environmentally friendly and cost-effective ways for removing fluoride is the use of bone char. In this review, the structural properties and binding affinity of fluoride ions from different water sources was critically discussed. The effect of experimental conditions on enhancing the adsorption capacity of fluoride ions using bone char samples was addressed. It appears that surface properties, and conditions of the bone char production such as temperature and residence time play an important role in designing the optimal fluoride removal process. The optimum temperature for fluoride removal seems to be in the range of 500–700 °C and a residence time of 2 h. Applying various equilibrium adsorption isotherms for understanding fluoride adsorption mechanism was presented. The effect of bone char modification with different elements were discussed and recommendations for a further increase in the removal efficiency was proposed. Cost of bone char production and large-scale treatment systems were also discussed based on information available from scientific and commercial sources. Challenges with existing domestic defluoridation designs were highlighted and suggestions for new conceptual designs were provided.
Description:
Increasing energy demands and more stringent legislation relating to pollutants such as nitrogen oxide (NO x ) and carbon monoxide (CO) from fossil fuels have accelerated the use of biofuels such as biodiesel. However, current limitations of using biodiesel as an alternative fuel for CI engines include a higher viscosity and higher NO x emissions. This is a major issue that could be improved by blending biodiesel with alcohols. This paper investigates the effect of a butanol-acetone mixture (BA) as an additive blended with biodiesel to improve the latter's properties. Macroscopic spray characteristics (spray penetration, spray cone angle and spray volume) were measured in constant volume vessel (CVV) at two injection pressures. A high-speed camera was used to record spray images. The spray's edge was determined using an automatic threshold calculation algorithm to locate the spray outline (edge) from the binary images. In addition, an engine test was carried out experimentally on a single-cylinder diesel engine. The engine's performance was measured using in-cylinder pressure, brake power (BP) and specific fuel consumption (SFC). Emission characteristics NO x CO and UHC were also measured. Neat biodiesel and three blends of biodiesel with up to 30% added BA were tested. The experimental data were analyzed via ANOVA to evaluate whether variations in parameters due to the different fuels were significant. The results showed that BA can enhance the spray characteristics of biodiesel by increasing both the spray penetration length and the contact surface area, thereby improving air-fuel mixing. The peak in-cylinder pressure for 30% BA was comparable to neat diesel and higher than that of neat biodiesel. Brake power (BP) was slightly improved for 10% BA at an engine speed of 2000 rpm while SFC was not significantly higher for any of the BA-biodiesel blends because of the smaller heating value of BA. Comparing the effect on emissions of adding BA to biodiesel, increasing the amount of BA reduced NO x and CO (7%) and (40%) respectively compared to neat biodiesel, but increased UHC.
Description:
Aim: The aim of this review was to identify and synthesise published accounts of recognising and responding to patient deterioration in the presence of deterioration antecedents. Design: The systematic review canvassed four electronic databases/ search engines for studies of adult ward patients who had altered physiological parameters before developing major adverse events. Synthesis Methods: The findings were synthesised using a narrative approach. Results: Clinical deterioration can be missed by nurses, even with adequate charting. Delays in recognising and responding to patient deterioration remains an international patient safety concern, and strategies to enhance recognition of patient deterioration have not achieved consistent improvements. The lack of significant and sustained improvement through targeted training suggests the problem may be rooted in human behaviour and local ward culture. Nurses play a pivotal role in recognising and responding to patient deterioration; however, patient records do not facilitate tracking of all nurse decisions and actions, and any undocumented care cannot be easily captured by auditing processes. Conclusion: Failure to recognise clinical deterioration was evident even with adequate charting. It is not clear if nurses do not recognise clinical deterioration because they failed to interpret the signs of deterioration or they made a conscious decision not to escalate based on their clinical judgement or they lacked attention at the time of the event. Whatever the reason, focus is warranted for nurses' decisionmaking after the recording of clinical deterioration signs and the role of human factors in delayed recognition, before maximum benefit of any strategy can be achieved.
Description:
Pulp and paper wastewaters are challenging to treat due to their variability, complexity and toxicity. Membrane Bioreactor’s (MBR’s) provide high-quality filtrates but are subject to periods of low filterability / high capillary suction time (CST) which potentially limit their use in this application. There is a paucity of published literature concerning long-term operational issues in full-scale, industrial MBR’s. We hypothesised that either changes of bacterial population, alteration/reduction of bacterial metabolism or bacterial production of extra-cellular polymers (ESPs) increased CST and reduced filterability. This study, conducted over two years at the 16.4MLD Gippsland Water Factory, was structured to inform this bacterial centric hypothesis. However, no shifts in bacterial population were seen as causative of high CST and microbial stress levels and biological activity were observed to be low during high CST and no sign of toxicity was found. The strongest correlator with CST was the concentration of colloidal Total Organic Carbon of the mixed liquor suspended solids (MLSS) supernatant (following centrifugation). The carbonaceous colloids accumulated in the supernatant were named ‘Non-Centrifugable Total Organic Carbon’ (NCTOC). Their accumulation in the MLSS was found be due to their biologically refractory nature and their retention by the MBR membrane. The accumulation of NCTOC typically followed a period where the influent had a high colour and a high sodium to calcium ratio, which is consistent with a pulping by-product called ‘Black Liquor’. Additional experiments with Black Liquor allowed us to conclude that high CST can be produced by addition of Black Liquor.
Description:
Pulp and paper wastewaters are challenging to treat due to their variability, complexity and toxicity. Membrane Bioreactor’s (MBR’s) provide high-quality filtrates but are subject to periods of low filterability / high capillary suction time (CST) which potentially limit their use in this application. There is a paucity of published literature concerning long-term operational issues in full-scale, industrial MBR’s. We hypothesised that either changes of bacterial population, alteration/reduction of bacterial metabolism or bacterial production of extra-cellular polymers (ESPs) increased CST and reduced filterability. This study, conducted over two years at the 16.4MLD Gippsland Water Factory, was structured to inform this bacterial centric hypothesis. However, no shifts in bacterial population were seen as causative of high CST and microbial stress levels and biological activity were observed to be low during high CST and no sign of toxicity was found. The strongest correlator with CST was the concentration of colloidal Total Organic Carbon of the mixed liquor suspended solids (MLSS) supernatant (following centrifugation). The carbonaceous colloids accumulated in the supernatant were named ‘Non-Centrifugable Total Organic Carbon’ (NCTOC). Their accumulation in the MLSS was found be due to their biologically refractory nature and their retention by the MBR membrane. The accumulation of NCTOC typically followed a period where the influent had a high colour and a high sodium to calcium ratio, which is consistent with a pulping by-product called ‘Black Liquor’. Additional experiments with Black Liquor allowed us to conclude that high CST can be produced by addition of Black Liquor.
Description:
Hydrocarbon production and development of carbonate reservoirs mainly depend on fractures that cross wells. Therefore, quantification of their characteristics has a crucial role in reservoir management. In this research, bedding planes, faults and different types of fractures of a Cenomanian-Turonian carbonate reservoir in the Persian Gulf were studied. Image logs including the oil-based mud image (OBMI) and the ultrasonic borehole image (UBI) were used. The results from conventional petrophysical log suites were compared to the image logs results. Based on the image logs, structural characteristics of bedding planes were reconstructed by estimating their strike, dip, dip direction and layer thickness. Fracture types and their distribution and the geometry in the well were determined. Also, fault zone geometry and type of faults were evaluated. The results indicate that majority of the bedding planes have a N58W strike with an average dip of 18° towards NE. Furthermore, both tensile and shear fractures were distinguished, although shear fractures dominated and the 328/36SW and 29/45NW were found to be the prevalent orientation of fractures. Based on petrophysical logs analyses, four facies groups are distinguished and two statistical relationships are proposed for estimation of discontinuities. The proposed index for evaluation of fractures using petrophysical logs shows good performance and it could be used for wells when no image log is available. Especially in offshore reservoirs, lack of outcrop and unavailability of image logs of old wells lead to unknown fractures characteristics which will be addressed by the suggested equations.