Inchoate fault detection framework: adaptive selection of wavelet nodes and cumulant orders
- Authors: Yaqub, Muhammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2012
- Type: Text , Journal article
- Relation: IEEE Transactions on Instrumentation and Measurement Vol. 61, no. 3 (2012), p. 685-695
- Full Text:
- Reviewed:
- Description: Inchoate fault detection for machine health monitoring (MHM) demands high level of fault classification accuracy under poor signal-to-noise ratio (SNR) which persists in most industrial environment. Vibration signals are extensively used in signature matching for abnormality detection and diagnosis. In order to guarantee improved performance under poor SNR, feature extraction based on statistical parameters which are immune to Gaussian noise becomes inevitable. This paper proposes a novel framework for adaptive feature extraction based on higher order cumulants (HOCs) and wavelet transform (WT) (AFHCW) for MHM. Features extracted based on HOCs have the tendency to mitigate the impact of Gaussian noise. WT provides better time and frequency domain analysis for the nonstationary signals such as vibration in which spectral contents vary with respect to time. In AFHCW, stationary WT is used to ensure linear processing on the vibration data prior to feature extraction, and it helps in mitigating the impact of poor SNR. K-nearest neighbor classifier is used to categorize the type of the fault. Simulation studies show that the proposed scheme outperforms the existing techniques in terms of classification accuracy under poor SNR.
Machine health monitoring based on stationary wavelet transform and fourth-order cumulants
- Authors: Yaqub, Muhammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2012
- Type: Text , Journal article
- Relation: International Review of Electrical Engineering Vol. 6, no. 1 (2012), p. 238-248
- Full Text: false
- Reviewed:
- Description: Early stage faults detection for machine health monitoring demands high level of fault classification accuracy under poor signal-to-noise ratio (SNR). Vibration signal which is used for signature matching in case of abnormality detection and diagnosis, requires robust tools such as wavelet transform (WT) for time-frequency analysis. WT is specifically used to deal with nonstationary signals. In order to guarantee improved performance under poor SNR, this paper proposes a scheme for feature extraction based on fourth-order cumulant and stationary wavelet transform (FoCSWT). Higher order cumulants have the tendency to mitigate the impact of Gaussian noise. Fourth-order cumulant corresponds to the "peakedness" of the random distribution and the fault detection capability quantifies it as the most dominant cumulant among higher order statistics. Stationary wavelet transform is used to avoid down-sampling on the vibration data prior to feature extraction which gives better estimation of statistical parameters of the data distribution and gives performance enhancement in terms of fault classification accuracy. Simulation studies show that FoCSWT outperforms the existing techniques in terms of fault detection accuracies under poor SNR.
Priority based expansion of neighborhood size for heterogeneous traffic routing in WSN
- Authors: Rizal, Muhammad Nur , Gondal, Iqbal , Haghighi, P. Delir , Qiu, Bin
- Date: 2012
- Type: Text , Conference paper
- Relation: 9th ACM International Symposium on Performance Evaluation of Wireless Ad Hoc, Sensor, and Ubiquitous Networks, PE-WASUN 2012 p. 101-106
- Full Text: false
- Reviewed:
- Description: This paper presents a new routing scheme that adapts to the requirements of heterogeneous traffic. The proposed scheme introduces further improvements to our developed ExtTeGAR algorithm. The aim of the scheme is to achieve low latency and to satisfy multiple quality of service (QoS) in various network conditions. In doing so, the proposed approach exploits multiple nodes’ attributes such as energy, distance to the base station (BS), history of hop delay of data to neighbors and probability of link availability to determine the best node for delivering different traffic requirements. The contribution of the scheme is its ability to differentiate the required data-related to each type of traffic and give different priorities to different data categories so that each type of traffic classification ensures to meet the demands of the application requirements. The proposed scheme uses a distance-based and a location-aware approach to create a shortest path for type of packets with given deadlines and it provides adaptability to increase the transmission range to expand the neighborhood sizes for data delivery continuation. The paper shows that the proposed scheme outperforms an existing QoS routing algorithm (SPEED) in various application scenarios and different network sizes.
Priority based expansion of neighbourhood size for heterogeneous traffic routing in WSN
- Authors: Rizal, Muhammad Nur , Gondal, Iqbal , Delir Haghighi, Pari , Qiu, Bin
- Date: 2012
- Type: Text , Conference paper
- Relation: ACM International Symposium on Performance Evaluation of Wireless Ad-Hoc, Sensor, and Ubiquitous Networks p. 101 - 106
- Full Text: false
- Reviewed:
Smart phone based machine condition monitoring system
- Authors: Gondal, Iqbal , Yaqub, Muhammad , Hua, Xueliang
- Date: 2012
- Type: Text , Conference paper
- Relation: 19th International Conference on Neural Information Processing p. 488-497
- Full Text: false
- Reviewed:
- Description: Machine condition monitoring has gained momentum over the years and becoming an essential component in the today’s industrial units. A cost effective machine condition monitoring system is need of the hour for predictive maintenance. In this paper, we have developed a machine condition monitoring system using smart phone, thanks to the rapidly growing smart-phone market both in scalability and computational power. In spite of certain hardware limitations, this paper proposes a machine condition monitoring system which has the tendency to acquire data, build the fault diagnostic model and determine the type of the fault in the case of unknown fault signatures. Results for the fault detection accuracy are presented which validate the prospects of the proposed framework in future condition monitoring services.
Unitary anomaly detection for ubiquitous safety in machine health monitoring
- Authors: Amar, Muhammad , Gondal, Iqbal , Wilson, Campbell
- Date: 2012
- Type: Text , Conference paper
- Relation: 19th International Conference on Neural Information Processing (INCONIP) p. 361-368
- Full Text: false
- Reviewed:
- Description: Safety has always been of vital concern in both industrial and home applications. Ensuring safety often requires certain quantifications regarding the inclusive behavior of the system under observation in order to determine deviations from normal behavior. In machine health monitoring, the vibration signal is of great importance for such measurements because it includes abundant information from several machine parts and surroundings that can influence machine behavior. This paper proposes a unitary anomaly detection technique (UAD) that, upon observation of abnormal behavior in the vibration signal, can trigger an alarm with an adjustable threshold in order to meet different safety requirements. The normalized amplitude of spectral contents of the quasi stationary time vibration signal are divided into frequency bins, and the summed amplitudes frequencies over bin are used as features. From a training set consisting of normal vibration signals, Gaussian distribution models are obtained for each feature, which are then used for anomaly detection.
A new resource distribution model for improved QoS in an integrated WiMAX/WiFi architecture
- Authors: Rabbani, Md , Kamruzzaman, Joarder , Gondal, Iqbal , Ahmad, Iftekhar
- Date: 2011
- Type: Text , Conference paper
- Full Text: false
- Reviewed:
Action recognition using spatio-temporal distance classifier correlation filter
- Authors: Anwaar-Ul Haq , Gondal, Iqbal , Murshed, Manzur
- Date: 2011
- Type: Text , Conference proceedings
- Relation: 2011 International Conference on Digital Image Computing Techniques and Applications (DICTA), Noosa, QLD, 6th-8th Dec, 2011
- Full Text: false
- Reviewed:
- Description: The problem of recognizing human actions is characterized by complex dynamics and strong variations in their executions. Despite this inconvenience, space-time correlations provide valuable clues for their discrimination. Therefore, space-time correlators like emph{Maximum Average Correlation Height} (MACH) filters have successfully been used for action recognition with encouraging results. However, their utility is challenged due to number of factors: (i) these filters are trained only for one class at a time and separate filters are required for each class increasing computational overhead, (ii) these filters simply take average of similar action instances and behave no better than average filters and (iii) misaligned action datasets create problems for these filters as they are not shift-invariant. In this paper, we address these issues by posing action recognition as a multi-class discrimination problem and propose a emph{single} 3D frequency domain filter, named Action ST-DCCF for multiple action classes that mitigates inherent discrepancies of correlation filters. It presents a different interpretation of correlation filters as a method of applying spatio-temporal transformation to the data rather than simply minimizing correlation energy across all possible shifts. Experiments on a variety of action datasets are performed to evaluate our approach. Experimental results are comparable to the existing action recognition approaches.
- Description: The problem of recognizing human actions is characterized by complex dynamics and strong variations in their executions. Despite this inconvenience, space-time correlations provide valuable clues for their discrimination. Therefore, space-time correlators like \emph{Maximum Average Correlation Height} (MACH) filters have successfully been used for action recognition with encouraging results. However, their utility is challenged due to number of factors: (i) these filters are trained only for one class at a time and separate filters are required for each class increasing computational overhead, (ii) these filters simply take average of similar action instances and behave no better than average filters and (iii) misaligned action datasets create problems for these filters as they are not shift-invariant. In this paper, we address these issues by posing action recognition as a multi-class discrimination problem and propose a \emph{single} 3D frequency domain filter, named Action ST-DCCF for multiple action classes that mitigates inherent discrepancies of correlation filters. It presents a different interpretation of correlation filters as a method of applying spatio-temporal transformation to the data rather than simply minimizing correlation energy across all possible shifts. Experiments on a variety of action datasets are performed to evaluate our approach. Experimental results are comparable to the existing action recognition approaches.
CODAR: Congestion and delay aware routing to detect time critical events
- Authors: Bhuiyan, Mohammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Full Text: false
- Reviewed:
- Description: Reliability and timeliness are two essential requirements of successful detection of critical events in Wireless Sensor Networks (WSNs). The base station (BS) is particularly interested about reliable and timely collection of data sent by the nodes close to the ongoing event, and at that time, the data sent by other nodes have little importance. In this paper, we propose Congestion and Delay Aware Routing (CODAR) protocol that tries to route data in congestion and delay aware manners. If congestion occurs, it also mitigates congestion by utilizing an accurate data-rate adjustment. Each node collects control information from neighbours and works in a distributed manner. CODAR also puts emphasis on successful collection of these control information which eventually provides desirable performance. Experimental results show that CODAR is capable of avoiding and mitigating congestion effectively, and performs better than similar known techniques in terms of reliable and timely event detection.
Contextual action recognition in multi-sensor nighttime video sequences
- Authors: Anwaar-Ul, Haq , Gondal, Iqbal , Murshed, Manzur
- Date: 2011
- Type: Text , Conference paper
- Relation: Proceedings of the 2011 Digital Image Computing: Techniques and Applications (DICTA 2011), Noosa 6th-8th Dec, 2011 p. 256-261
- Full Text: false
- Reviewed:
- Description: Contextual information is important for interpreting human actions especially when actions exhibit interactive relationship with their context. Contextual clues become even more crucial when videos are captured in unfavorable conditions like extreme low light nighttime scenarios. These conditions encourage the use of multi-senor imagery and context enhancement. In this paper, we explore the importance of contextual knowledge for recognizing human actions in multi-sensor nighttime videos. Information fusion is utilized for encapsulating visual information about actions and their context. Space-time action information is contained using 3D fourier transform of fused action silhouette volume. In parallel, SIFT context images are extracted and fused using principal component analysis based feature fusion for each action class. Contextual dissimilarity is penalized by minimizing context SIFT flow energy. The action dataset comprises multi-sensor night vision video data from infra-red and visible spectrum. Experimental results show that fused contextual action information boost action recognition performance as compared to the baseline action recognition approac
Dual-channel based energy efficient event clustering and data gathering in WSNs
- Authors: Bhuiyan, Mohammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: 17th Asia Pacific Conference on Communications, APCC 2011; Sabah, Malaysia; 2nd-5th October 2011 p. 241-246
- Full Text: false
- Reviewed:
- Description: Wireless sensor networks (WSNs), now-a-days, are deployed in environmental data collection as well as in critical event monitoring. Successful data collection requires reliability while reliable event detection necessitates timeliness. Simultaneous data gathering and event monitoring is not well studied in literature. In this paper, we propose a system model that works on homogeneous data gathering WSNs. When an event occurs, an event cluster with a different transmission channel is formed and both data gathering and event monitoring are performed at the same time. The proposed model has a novel routing strategy with a built-in congestion control technique to provide timely delivery of event data. Experimental results show that the proposed method performs better than known similar techniques in terms of reliable data gathering and reliable timely event monitoring. It also enhances the network lifetime significantly compared to other existing methods.
Dynamic dwell timer for hybrid vertical handover in 4G coupled networks
- Authors: Haider, Ammar , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Full Text: false
- Reviewed:
Dynamic resource allocation for improved QoS in WiMAX/WiFi integration
- Authors: Rabbani, Md , Kamruzzaman, Joarder , Gondal, Iqbal , Ahmad, Iftekhar , Hassan, Md Rafiul
- Date: 2011
- Type: Text , Journal article
- Relation: Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing 2011 (Studies in Computational Intelligence series) Vol. 368, no. 2011 (2011), p. 141-156
- Full Text: false
- Reviewed:
- Description: Wireless access technology has come a long way in its relatively short but remarkable lifetime, which has so far been led by WiFi technology. WiFi enjoys a high penetration in the market.Most of the electronic gadgets such as laptop, notepad, mobile set, etc., boast the provision ofWiFi. Currently most WiFi hotspots are connected to the Internet via wired connections (e.g., Ethernet), and the deployment cost of wired connection is high. On the other hand, since WiMAX can provide a high coverage area and transmission bandwidth, it is very suitable for the backbone networks of WiFi. WiMAX can also provide the better QoS needed for many 4G applications. WiMAX devices, however, are not as common as WiFi devices and it is also expensive to deploy aWiMAX-only infrastructure. An integrated WiMAX/WiFi architecture (using WiMAX as backhaul connection for WiFi) can support 4G applications with QoS assurance and mobility, and provide high-speed broadband services in rural, regional and urban areas while reducing the backhaul cost. WiMAX and WiFi have different MAC mechanisms to handle QoS. WiMAX MAC architecture is connection-oriented providing the platform for strong QoS control. In contrast,WiFi MAC is not connection-oriented, hence can provide only best effort services. Delivering improved QoS in an integrated WiMAX/WiFi architecture poses a serious technological challenge. The paper depicts a converged architecture of WiMAX and WiFi, and then proposes an adaptive resource distribution model for the access points. The resource distribution model ultimately allocates more time slots to those connections that need more instantaneous resources to meet QoS requirements. A dynamic splitting technique is also presented that divides the total transmission period into downlink and uplink transmission by taking the minimum data rate requirements of the connections into account. This ultimately improves the utilization of the available resources, and the QoS of the connections. Simulation results show that the proposed schemes significantly outperform the other existing resource sharing schemes, in terms of maintaining QoS of different traffic classes in an integratedWiMAX/WiFi architecture
Dynamic sensor selection for target tracking in wireless sensor networks
- Authors: Armaghani, Farzaneh , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: IEEE 74th Vehicular Technology Conference, VTC Fall 2011; San Francisco, United States; 5th-8th September 2011 p. 1-6
- Full Text: false
- Reviewed:
- Description: Optimum selection of sensors in target tracking applications has a great potential to maintain right trade-off between energy consumption and quality of tracking. In this paper, we propose a dynamic sensor selection scheme to achieve energy efficiency while ensuring the required quality of tracking. To this end, relative information utility projection of a target on sensors' observation is used in niche overlap measurements. Niche overlap measures are used to assess the similarity in information utilities where information utility is inversely proportional to error in target's state estimation based on prior distribution. The proposed scheme is a greedy approach in which sensor nodes are selected such that the overall niche overlap of all the selected nodes is maximized until the required level of accuracy is achieved. Our simulation results show significant improvement in tracking accuracy and network's lifetime over the existing methods.
Envelope-Wavelet Packet Transform for Machine Condition Monitoring
- Authors: Yaqub, Muhammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: 2011 International Conference on Control, Automation, Robotics and Vision (ICCARV); Venice, Italy; 23rd-25th November 2011; published in Proceedings of the World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering Vol. 5, p. 1597-1603
- Full Text:
- Reviewed:
- Description: Wavelet transform has been extensively used in machine fault diagnosis and prognosis owing to its strength to deal with non-stationary signals. The existing Wavelet transform based schemes for fault diagnosis employ wavelet decomposition of the entire vibration frequency which not only involve huge computational overhead in extracting the features but also increases the dimensionality of the feature vector. This increase in the dimensionality has the tendency to 'over-fit' the training data and could mislead the fault diagnostic model. In this paper a novel technique, envelope wavelet packet transform (EWPT) is proposed in which features are extracted based on wavelet packet transform of the filtered envelope signal rather than the overall vibration signal. It not only reduces the computational overhead in terms of reduced number of wavelet decomposition levels and features but also improves the fault detection accuracy. Analytical expressions are provided for the optimal frequency resolution and decomposition level selection in EWPT. Experimental results with both actual and simulated machine fault data demonstrate significant gain in fault detection ability by EWPT at reduced complexity compared to existing techniques.
I-MAC: energy efficient intelligent MAC protocol for wireless sensor networks
- Authors: Bhuiyan, Mohammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: 17th Asia Pacific Conference on Communications, APCC 2011; Sabah, Malaysia; 2nd-5th October 2011 p. 133-138
- Full Text: false
- Reviewed:
- Description: Energy efficiency is a vital aspect of resource constrained wireless sensor networks (WSNs). All protocols designed for WSNs must be energy aware in order to prolong the network lifetime. In this paper, we have designed a novel MAC layer protocol (I-MAC: Intelligent MAC) for WSNs. By exercising intelligent sleep and wake-up schedule, I-MAC saves energy of the resource constrained sensor nodes greatly. At the same time, I-MAC does not compromise its operational performances. Both analytical study and simulation prove that I-MAC is not only highly energy efficient but also its operational performances are better than similar protocols.
Machine fault severity estimation based on adaptive wavelet nodes selection and SVM
- Authors: Yaqub, Muhammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: IEEE International Conference on Mechatronics and Automation (ICMA),Beijing 7 August 2011 to 10 August 2011) p. 1951-1956
- Full Text: false
- Reviewed:
- Description: The study is focused on estimating the severity level of the bearing faults which helps in determining the residual life of the equipment and planned maintenance. A novel technique, adaptive severity estimation model (ASEM) is proposed based on adaptive selection of wavelet decomposition nodes and support vector machines. Vibration data from multiple severity levels are used to build the fault estimation model. An adaptive criterion for wavelet decomposition node selection is developed which helps ASEM to achieve robustness in estimating fault severity under varying signal to noise ratio (SNR), a key demand in industrial environment. The simulated data with known severity level is used to parameterize the estimation model. The fault severity estimation performance of ASEM is also validated for the real vibration data and its robustness is gauged under varying SNR conditions.
Multiple-points fault signature's dynamics modeling for bearing defect frequencies
- Authors: Yaqub, Muhammad , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: 2011 International Conference on Control, Automation, Robotics and Vision (ICCARV); Venice, Italy; 23rd-25th November 2011; published in Proceedings of the World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering Vol. 5, p. 2548-2553
- Full Text:
- Reviewed:
- Description: Occurrence of a multiple-points fault in machine operations could result in exhibiting complex fault signatures, which could result in lowering fault diagnosis accuracy. In this study, a multiple-points defect model (MPDM) is proposed which can simulate fault signature-s dynamics for n-points bearing faults. Furthermore, this study identifies that in case of multiple-points fault in the rotary machine, the location of the dominant component of defect frequency shifts depending upon the relative location of the fault points which could mislead the fault diagnostic model to inaccurate detections. Analytical and experimental results are presented to characterize and validate the variation in the dominant component of defect frequency. Based on envelop detection analysis, a modification is recommended in the existing fault diagnostic models to consider the multiples of defect frequency rather than only considering the frequency spectrum at the defect frequency in order to incorporate the impact of multiple points fault.
On dynamic scene geometry for view-invariant action matching
- Authors: Ul-Haq, Anwaar , Gondal, Iqbal , Murshed, Manzur
- Date: 2011
- Type: Text , Conference paper
- Relation: 24th IEEE Conference on Computer Vision and Pattern Recognition (CVPR) p. 3305-3312
- Full Text: false
- Reviewed:
- Description: Variation in viewpoints poses significant challenges to action recognition. One popular way of encoding view-invariant action representation is based on the exploitation of epipolar geometry between different views of the same action. Majority of representative work considers detection of landmark points and their tracking by assuming that motion trajectories for all landmark points on human body are available throughout the course of an action. Unfortunately, due to occlusion and noise, detection and tracking of these landmarks is not always robust. To facilitate it, some of the work assumes that such trajectories are manually marked which is a clear drawback and lacks automation introduced by computer vision. In this paper, we address this problem by proposing view invariant action matching score based on epipolar geometry between actor silhouettes, without tracking and explicit point correspondences. In addition, we explore multi-body epipolar constraint which facilitates to work on original action volumes without any pre-processing. We show that multi-body fundamental matrix captures the geometry of dynamic action scenes and helps devising an action matching score across different views without any prior segmentation of actors. Extensive experimentation on challenging view invariant action datasets shows that our approach not only removes long standing assumptions but also achieves significant improvement in recognition accuracy and retrieval.
Optimally parameterized wavelet packet transform for incipient machine fault diagnosis
- Authors: Yaqub, Muhammad Farrukh , Gondal, Iqbal , Kamruzzaman, Joarder
- Date: 2011
- Type: Text , Conference paper
- Relation: 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011
- Full Text: false
- Reviewed:
- Description: Vibration signals used for abnormality detection in machine health monitoring (MHM) are non-stationary in nature. Wavelet packet transform is extensively used in the literature for comprehensive analysis of non-stationary vibration signal but these techniques work only for a specific application lacking in some generalized methodology for selecting appropriate wavelet decomposition level and nodes for optimal performance. This study proposes a framework for inchoate fault detection by selecting the optimal wavelet decomposition level and nodes, named Optimally Parameterized Wavelet Packet Transform (OPWPT). OPWPT uses support vector machine to build the fault diagnostic model. Results in comparison with the existing schemes validate that OPWPT enhances the fault detection accuracy significantly in case of incipient faults when vibration signatures are very weak and overall signal to noise ratio is very poor.