Prediction of blast-induced ground vibration at a limestone quarry : an artificial intelligence approach
- Arthur, Clement, Bhatawdekar, Ramesh, Mohamad, Edy, Sabri, Mohanad, Bohra, Manish, Khandelwal, Manoj, Kwon, Sangki
- Authors: Arthur, Clement , Bhatawdekar, Ramesh , Mohamad, Edy , Sabri, Mohanad , Bohra, Manish , Khandelwal, Manoj , Kwon, Sangki
- Date: 2022
- Type: Text , Journal article
- Relation: Applied Sciences (Switzerland) Vol. 12, no. 18 (2022), p.
- Full Text:
- Reviewed:
- Description: Ground vibration is one of the most unfavourable environmental effects of blasting activities, which can cause serious damage to neighboring homes and structures. As a result, effective forecasting of their severity is critical to controlling and reducing their recurrence. There are several conventional vibration predictor equations available proposed by different researchers but most of them are based on only two parameters, i.e., explosive charge used per delay and distance between blast face to the monitoring point. It is a well-known fact that blasting results are influenced by a number of blast design parameters, such as burden, spacing, powder factor, etc. but these are not being considered in any of the available conventional predictors and due to that they show a high error in predicting blast vibrations. Nowadays, artificial intelligence has been widely used in blast engineering. Thus, three artificial intelligence approaches, namely Gaussian process regression (GPR), extreme learning machine (ELM) and backpropagation neural network (BPNN) were used in this study to estimate ground vibration caused by blasting in Shree Cement Ras Limestone Mine in India. To achieve that aim, 101 blasting datasets with powder factor, average depth, distance, spacing, burden, charge weight, and stemming length as input parameters were collected from the mine site. For comparison purposes, a simple multivariate regression analysis (MVRA) model as well as, a nonparametric regression-based technique known as multivariate adaptive regression splines (MARS) was also constructed using the same datasets. This study serves as a foundational study for the comparison of GPR, BPNN, ELM, MARS and MVRA to ascertain their respective predictive performances. Eighty-one (81) datasets representing 80% of the total blasting datasets were used to construct and train the various predictive models while 20 data samples (20%) were utilized for evaluating the predictive capabilities of the developed predictive models. Using the testing datasets, major indicators of performance, namely mean squared error (MSE), variance accounted for (VAF), correlation coefficient (R) and coefficient of determination (R2) were compared as statistical evaluators of model performance. This study revealed that the GPR model exhibited superior predictive capability in comparison to the MARS, BPNN, ELM and MVRA. The GPR model showed the highest VAF, R and R2 values of 99.1728%, 0.9985 and 0.9971 respectively and the lowest MSE of 0.0903. As a result, the blast engineer can employ GPR as an effective and appropriate method for forecasting blast-induced ground vibration. © 2022 by the authors.
- Authors: Arthur, Clement , Bhatawdekar, Ramesh , Mohamad, Edy , Sabri, Mohanad , Bohra, Manish , Khandelwal, Manoj , Kwon, Sangki
- Date: 2022
- Type: Text , Journal article
- Relation: Applied Sciences (Switzerland) Vol. 12, no. 18 (2022), p.
- Full Text:
- Reviewed:
- Description: Ground vibration is one of the most unfavourable environmental effects of blasting activities, which can cause serious damage to neighboring homes and structures. As a result, effective forecasting of their severity is critical to controlling and reducing their recurrence. There are several conventional vibration predictor equations available proposed by different researchers but most of them are based on only two parameters, i.e., explosive charge used per delay and distance between blast face to the monitoring point. It is a well-known fact that blasting results are influenced by a number of blast design parameters, such as burden, spacing, powder factor, etc. but these are not being considered in any of the available conventional predictors and due to that they show a high error in predicting blast vibrations. Nowadays, artificial intelligence has been widely used in blast engineering. Thus, three artificial intelligence approaches, namely Gaussian process regression (GPR), extreme learning machine (ELM) and backpropagation neural network (BPNN) were used in this study to estimate ground vibration caused by blasting in Shree Cement Ras Limestone Mine in India. To achieve that aim, 101 blasting datasets with powder factor, average depth, distance, spacing, burden, charge weight, and stemming length as input parameters were collected from the mine site. For comparison purposes, a simple multivariate regression analysis (MVRA) model as well as, a nonparametric regression-based technique known as multivariate adaptive regression splines (MARS) was also constructed using the same datasets. This study serves as a foundational study for the comparison of GPR, BPNN, ELM, MARS and MVRA to ascertain their respective predictive performances. Eighty-one (81) datasets representing 80% of the total blasting datasets were used to construct and train the various predictive models while 20 data samples (20%) were utilized for evaluating the predictive capabilities of the developed predictive models. Using the testing datasets, major indicators of performance, namely mean squared error (MSE), variance accounted for (VAF), correlation coefficient (R) and coefficient of determination (R2) were compared as statistical evaluators of model performance. This study revealed that the GPR model exhibited superior predictive capability in comparison to the MARS, BPNN, ELM and MVRA. The GPR model showed the highest VAF, R and R2 values of 99.1728%, 0.9985 and 0.9971 respectively and the lowest MSE of 0.0903. As a result, the blast engineer can employ GPR as an effective and appropriate method for forecasting blast-induced ground vibration. © 2022 by the authors.
The effect of the petrography, mineralogy, and physical properties of limestone on Mode I fracture toughness under dry and saturated conditions
- Safari Farrokhad, Sajad, Lashkaripour, Gholam, Hafezi Moghaddas, Nasser, Aligholi, Saeed, Sabri, Mohanad
- Authors: Safari Farrokhad, Sajad , Lashkaripour, Gholam , Hafezi Moghaddas, Nasser , Aligholi, Saeed , Sabri, Mohanad
- Date: 2022
- Type: Text , Journal article
- Relation: Applied Sciences (Switzerland) Vol. 12, no. 18 (2022), p.
- Full Text:
- Reviewed:
- Description: Determining the fracture toughness of rock materials is a challenging, costly, and time-consuming task, as fabricating a sharp crack in rock specimens will lead to failure of the specimen, and preparing specimens for determining the rock fracture toughness requires special equipment. In this paper, the relationship between mode I fracture toughness (KIC) with the rock index properties, mineralogy, and petrography of limestone is investigated using simple nonlinear and simple/multiple linear regression analyses to provide alternative methods for estimating the fracture toughness of limestones. The cracked chevron notched Brazilian disk (CCNBD) method was applied to 30 limestones with different petrographic and mineralogical characteristics under both dry and saturated conditions. Moreover, the index properties of the same rocks, including the density, porosity, electrical resistivity, P and S wave velocities, Schmidt rebound hardness, and point load index, were determined. According to the statistical analyses, a classification based on the petrography of the studied rocks was required for predicting the fracture toughness from index properties. By classifying the limestones based on petrography, reliable relationships with high correlations can be introduced for estimating the fracture toughness of different limestones using simple tests. © 2022 by the authors.
- Authors: Safari Farrokhad, Sajad , Lashkaripour, Gholam , Hafezi Moghaddas, Nasser , Aligholi, Saeed , Sabri, Mohanad
- Date: 2022
- Type: Text , Journal article
- Relation: Applied Sciences (Switzerland) Vol. 12, no. 18 (2022), p.
- Full Text:
- Reviewed:
- Description: Determining the fracture toughness of rock materials is a challenging, costly, and time-consuming task, as fabricating a sharp crack in rock specimens will lead to failure of the specimen, and preparing specimens for determining the rock fracture toughness requires special equipment. In this paper, the relationship between mode I fracture toughness (KIC) with the rock index properties, mineralogy, and petrography of limestone is investigated using simple nonlinear and simple/multiple linear regression analyses to provide alternative methods for estimating the fracture toughness of limestones. The cracked chevron notched Brazilian disk (CCNBD) method was applied to 30 limestones with different petrographic and mineralogical characteristics under both dry and saturated conditions. Moreover, the index properties of the same rocks, including the density, porosity, electrical resistivity, P and S wave velocities, Schmidt rebound hardness, and point load index, were determined. According to the statistical analyses, a classification based on the petrography of the studied rocks was required for predicting the fracture toughness from index properties. By classifying the limestones based on petrography, reliable relationships with high correlations can be introduced for estimating the fracture toughness of different limestones using simple tests. © 2022 by the authors.
- «
- ‹
- 1
- ›
- »