A comparative analysis of the motivational factors of Chinese and non-Chinese tourists visiting Melbourne
- Authors: Soldatenko, Daria
- Date: 2021
- Type: Text , Thesis , PhD
- Full Text:
- Description: This study is devoted to a comparison of motivational factors of travellers from China and non-Chinese countries visiting the same destination (Melbourne). Given the importance of the Chinese market to Australia, it seems important to explore this market in terms of motivational factors and understand its specifics and peculiarities. In addition, the topicality of such research was revealed through a content analysis of cross-cultural push/pull motivational studies in tourism relating to nationalities. Leiper’s model of tourist’s pre-trip psychological process (2004) was adapted and modified in terms of push and pull factors that combine not only needs and destination attributes, but also include a number of additional factors, such as information about recreation possibilities of visiting places, expectation about potential experiences during the trip, as well as means, namely money, time and absence of other constraints. The model enables an understanding of the linkages and relationships between the various motivational variables and their influence on destination choice. This study employs quantitative methods to examine and compare the motivational factors of two studied samples. Data were collected through an online survey, which was provided in two languages (English and Chinese). The data analysis was undertaken in Statistical Package for the Social Sciences (SPSS) - 26.0 software by the means of various descriptive and inferential statistical techniques, such as Principal Component Analysis (PCA), Independent T-tests, Multiple regression analysis, and Canonical correlation analysis. In addition, the relationships between motivational variables in a proposed model were examined by using Partial Least Squares Structural Equation Modelling (PLS-SEM). The present study revealed a number of differences in trip characteristics and tourist motivational factors between the Chinese and non-Chinese samples. The differences identified between the two target markets are closely related to traits of individualist and collectivist cultures. This conclusion verifies the findings of previous tourism research that culture influences travel behaviour. The knowledge of cultural differences in motivation is very important for enhancing the efficiency and effectiveness of international tourism marketing. In addition, customising the services, products, and marketing programs for specific markets results in a high level of tourist satisfaction, and that in turn, leads to an increase in financial benefits associated with customer satisfaction and loyalty. This research has both theoretical and practical scientific significance. One significant contribution of this research is the development of a model of interrelated motivational factors in the travel decision-making process that enables the identification of the most influential motivational factors in travel decisions. The relationships between the push and pull factors, such as motivations, destination attributes, information sources, expectations and constraints, and their influence on destination choice, were examined. In the present study, a close positive relationship between personal motivations and destination attributes, as well as a significant influence of information sources on expectations and destination choice were found. Such results highlight the importance of properly developed advertising and promotion strategies with special attention to their contents, emphasising particular push and pull factors for particular tourist markets or segments. In addition, the current study identified possible product bundles of tourists’ motivations and destination attributes and segmentation of visitors to Melbourne that might present valuable information for destination practitioners and marketers, as successful matching of push and pull factors is a prerequisite for effective and successful actions on attraction and retention of visitors. Identified similarities and differences between Chinese and non-Chinese samples in terms of their demographic profiles, trip characteristics, motivations for travelling, preferences of destination attributes, information source usage, trip expectations, constraints for travelling, and their evaluation of destination choice criteria provided useful information for developing specifically customised tourist products and services, as well as promotion programs, that are tailored to each market. Moreover, from theoretical perspective, the present study adds new depth to understanding the nature of motivational factors, affecting the travel decision-making process, and causal relationships among them. Thus, the study contributes to advancing both tourist behaviour research as well as tourism decision-making literature. In addition, this research identifies and addresses the gap in empirical research investigating tourists' behaviour patterns across economically and culturally different countries. As comparative motivational research of tourists from China and non-Chinese countries travelling to Australia had yet to be undertaken, this study might be considered important because it provides valuable information for targeting the main source countries for Australia. Such research may be especially valuable in post-COVID times when international borders open up and carefully planned marketing will be needed.
- Description: Doctor of Philosophy
- Authors: Soldatenko, Daria
- Date: 2021
- Type: Text , Thesis , PhD
- Full Text:
- Description: This study is devoted to a comparison of motivational factors of travellers from China and non-Chinese countries visiting the same destination (Melbourne). Given the importance of the Chinese market to Australia, it seems important to explore this market in terms of motivational factors and understand its specifics and peculiarities. In addition, the topicality of such research was revealed through a content analysis of cross-cultural push/pull motivational studies in tourism relating to nationalities. Leiper’s model of tourist’s pre-trip psychological process (2004) was adapted and modified in terms of push and pull factors that combine not only needs and destination attributes, but also include a number of additional factors, such as information about recreation possibilities of visiting places, expectation about potential experiences during the trip, as well as means, namely money, time and absence of other constraints. The model enables an understanding of the linkages and relationships between the various motivational variables and their influence on destination choice. This study employs quantitative methods to examine and compare the motivational factors of two studied samples. Data were collected through an online survey, which was provided in two languages (English and Chinese). The data analysis was undertaken in Statistical Package for the Social Sciences (SPSS) - 26.0 software by the means of various descriptive and inferential statistical techniques, such as Principal Component Analysis (PCA), Independent T-tests, Multiple regression analysis, and Canonical correlation analysis. In addition, the relationships between motivational variables in a proposed model were examined by using Partial Least Squares Structural Equation Modelling (PLS-SEM). The present study revealed a number of differences in trip characteristics and tourist motivational factors between the Chinese and non-Chinese samples. The differences identified between the two target markets are closely related to traits of individualist and collectivist cultures. This conclusion verifies the findings of previous tourism research that culture influences travel behaviour. The knowledge of cultural differences in motivation is very important for enhancing the efficiency and effectiveness of international tourism marketing. In addition, customising the services, products, and marketing programs for specific markets results in a high level of tourist satisfaction, and that in turn, leads to an increase in financial benefits associated with customer satisfaction and loyalty. This research has both theoretical and practical scientific significance. One significant contribution of this research is the development of a model of interrelated motivational factors in the travel decision-making process that enables the identification of the most influential motivational factors in travel decisions. The relationships between the push and pull factors, such as motivations, destination attributes, information sources, expectations and constraints, and their influence on destination choice, were examined. In the present study, a close positive relationship between personal motivations and destination attributes, as well as a significant influence of information sources on expectations and destination choice were found. Such results highlight the importance of properly developed advertising and promotion strategies with special attention to their contents, emphasising particular push and pull factors for particular tourist markets or segments. In addition, the current study identified possible product bundles of tourists’ motivations and destination attributes and segmentation of visitors to Melbourne that might present valuable information for destination practitioners and marketers, as successful matching of push and pull factors is a prerequisite for effective and successful actions on attraction and retention of visitors. Identified similarities and differences between Chinese and non-Chinese samples in terms of their demographic profiles, trip characteristics, motivations for travelling, preferences of destination attributes, information source usage, trip expectations, constraints for travelling, and their evaluation of destination choice criteria provided useful information for developing specifically customised tourist products and services, as well as promotion programs, that are tailored to each market. Moreover, from theoretical perspective, the present study adds new depth to understanding the nature of motivational factors, affecting the travel decision-making process, and causal relationships among them. Thus, the study contributes to advancing both tourist behaviour research as well as tourism decision-making literature. In addition, this research identifies and addresses the gap in empirical research investigating tourists' behaviour patterns across economically and culturally different countries. As comparative motivational research of tourists from China and non-Chinese countries travelling to Australia had yet to be undertaken, this study might be considered important because it provides valuable information for targeting the main source countries for Australia. Such research may be especially valuable in post-COVID times when international borders open up and carefully planned marketing will be needed.
- Description: Doctor of Philosophy
A comprehensive profile of elite tennis and strategies to enhance match play performance
- Authors: Hornery, Daniel
- Date: 2006
- Type: Text , Thesis , PhD
- Full Text:
- Description: "This dissertation illustrates an interdisciplinary sport science approach to further understand the interaction between physiology and performance in tennis. An integral theme throughout the experimental phases was the emphasis on obtaining information from actual competitive scenarios or settings that simulated a match environment. [...] This study extended the work of similar investigations through the multifaceted methods in which performance was quantified. Overall the thesis provides unique insight into the physiological demands of professional tournament tennis and the constraints these impose on performance. Furthermore, evidence was accrued to support some of the common preparatory and in-match behaviours used by players to enhance performance."
- Description: Doctor of Philosophy
- Authors: Hornery, Daniel
- Date: 2006
- Type: Text , Thesis , PhD
- Full Text:
- Description: "This dissertation illustrates an interdisciplinary sport science approach to further understand the interaction between physiology and performance in tennis. An integral theme throughout the experimental phases was the emphasis on obtaining information from actual competitive scenarios or settings that simulated a match environment. [...] This study extended the work of similar investigations through the multifaceted methods in which performance was quantified. Overall the thesis provides unique insight into the physiological demands of professional tournament tennis and the constraints these impose on performance. Furthermore, evidence was accrued to support some of the common preparatory and in-match behaviours used by players to enhance performance."
- Description: Doctor of Philosophy
A computational story model based on a story grammar that represents conflict
- Authors: Hall, Richard
- Date: 2002
- Type: Text , Thesis , PhD
- Full Text: false
- Description: "The work in this thesis investigates whether a computational story model can be formulated that can overcome the limitations of existing story models and also interact with stories in multiple ways, similar to the ways in which people interact with them."
- Description: Doctor of Philosophy
- Authors: Hall, Richard
- Date: 2002
- Type: Text , Thesis , PhD
- Full Text: false
- Description: "The work in this thesis investigates whether a computational story model can be formulated that can overcome the limitations of existing story models and also interact with stories in multiple ways, similar to the ways in which people interact with them."
- Description: Doctor of Philosophy
A computer-mediated framework to facilitate group consensus based on a shared understanding ConSULT
- Authors: Afshar, Faezeh
- Date: 2004
- Type: Text , Thesis , Masters , PhD
- Full Text: false
- Description: "Group decision-making usually involves a process of discussion and evaluation of alternatives. Important aspects of a group decision support system are: freedom to participate; the ability to explicitly present points of view; the ability to augment or oppose views by supporting evidence and reasoning; and the ability to use and consider other additional views .... The overall aim of this work is to develop an approach that can alleviate some of the problems associated with group commuication and consensus decision-making by effectively supporting group discussions towards consensus. Towards achieving this goal we have developed an approach called ConSULT (Consensus based on a Shared Understanding of a Leading Topic) as a computer-mediated framework to allow argumentation, collection and evaluation of discussion and group decision-making. This approach employs existing theories and techniques in computer-mediated communication, argumentation, Delphi and voting." -- Abstract.
- Description: Master of Information Technology
- Description: "Group decision-making usually involves a process of discussion and evaluation of alternatives. Important aspects of a group decision support system are: freedom to participate; the ability to explicitly present points of view; the ability to augment or oppose views by supporting evidence and reasoning; and the ability to use and consider other additional views .... The overall aim of this work is to develop an approach that can alleviate some of the problems associated with group commuication and consensus decision-making by effectively supporting group discussions towards consensus. Towards achieveing this goal we have developed an approach called ConSULT (Consensus based on a Shared Understanding of a Leading Topic) as a computer-mediated framework to allow argumentation, collection and evaluation of discussion and group decision-making. This approach employs existing theories and techniques in computer-mediated communication, argumentation, Delphi and voting." -- Abstract.
- Authors: Afshar, Faezeh
- Date: 2004
- Type: Text , Thesis , Masters , PhD
- Full Text: false
- Description: "Group decision-making usually involves a process of discussion and evaluation of alternatives. Important aspects of a group decision support system are: freedom to participate; the ability to explicitly present points of view; the ability to augment or oppose views by supporting evidence and reasoning; and the ability to use and consider other additional views .... The overall aim of this work is to develop an approach that can alleviate some of the problems associated with group commuication and consensus decision-making by effectively supporting group discussions towards consensus. Towards achieving this goal we have developed an approach called ConSULT (Consensus based on a Shared Understanding of a Leading Topic) as a computer-mediated framework to allow argumentation, collection and evaluation of discussion and group decision-making. This approach employs existing theories and techniques in computer-mediated communication, argumentation, Delphi and voting." -- Abstract.
- Description: Master of Information Technology
- Description: "Group decision-making usually involves a process of discussion and evaluation of alternatives. Important aspects of a group decision support system are: freedom to participate; the ability to explicitly present points of view; the ability to augment or oppose views by supporting evidence and reasoning; and the ability to use and consider other additional views .... The overall aim of this work is to develop an approach that can alleviate some of the problems associated with group commuication and consensus decision-making by effectively supporting group discussions towards consensus. Towards achieveing this goal we have developed an approach called ConSULT (Consensus based on a Shared Understanding of a Leading Topic) as a computer-mediated framework to allow argumentation, collection and evaluation of discussion and group decision-making. This approach employs existing theories and techniques in computer-mediated communication, argumentation, Delphi and voting." -- Abstract.
A conceptual framework for a theory of liquidity
- Authors: Culham, James
- Date: 2018
- Type: Text , Thesis , Masters , PhD
- Full Text:
- Description: This study contributes to the understanding of liquidity in two ways. First, it considers the multifaceted nature of liquidity and its relationship with money. Second, it constructs a conceptual framework for a theory of liquidity. The first contribution is achieved by clarifying and categorising the various forms of liquidity to identify those overlooked by the existing literature. The second contribution consists of a realist critique of the literature on liquidity and money to highlight the strengths and weaknesses of each theoretical approach. The study reflects on the attempts to analyse liquidity using moneyless models of perfect barter with the assumption that every commodity exhibits perfect saleability; an assumption that removes any need for a medium of exchange and, moreover, crowds out all other forms of liquidity. It is concluded that, because liquidity is a social and monetary phenomenon, it cannot be analysed with models populated by a representative agent consuming a single commodity. Furthermore, this conclusion is not altered by the introduction of ‘financial frictions’, which are fundamentally at odds with the nature of money. Instead, the clarification of the nature of liquidity forms the basis for an interpretation of Keynes’s theory of liquidity preference that emphasises its reliance on liquidity in general, not money in particular. The study introduces the terms redemption liquidity and exchange liquidity to explain the trade-off that underpins the theory of liquidity preference. Properly interpreted, the theory of liquidity preference can then address many of the deficiencies prevalent in the dominant theories of the rate of interest. The study therefore has implications for monetary policy and asset pricing.
- Description: Doctor of Philosophy
- Authors: Culham, James
- Date: 2018
- Type: Text , Thesis , Masters , PhD
- Full Text:
- Description: This study contributes to the understanding of liquidity in two ways. First, it considers the multifaceted nature of liquidity and its relationship with money. Second, it constructs a conceptual framework for a theory of liquidity. The first contribution is achieved by clarifying and categorising the various forms of liquidity to identify those overlooked by the existing literature. The second contribution consists of a realist critique of the literature on liquidity and money to highlight the strengths and weaknesses of each theoretical approach. The study reflects on the attempts to analyse liquidity using moneyless models of perfect barter with the assumption that every commodity exhibits perfect saleability; an assumption that removes any need for a medium of exchange and, moreover, crowds out all other forms of liquidity. It is concluded that, because liquidity is a social and monetary phenomenon, it cannot be analysed with models populated by a representative agent consuming a single commodity. Furthermore, this conclusion is not altered by the introduction of ‘financial frictions’, which are fundamentally at odds with the nature of money. Instead, the clarification of the nature of liquidity forms the basis for an interpretation of Keynes’s theory of liquidity preference that emphasises its reliance on liquidity in general, not money in particular. The study introduces the terms redemption liquidity and exchange liquidity to explain the trade-off that underpins the theory of liquidity preference. Properly interpreted, the theory of liquidity preference can then address many of the deficiencies prevalent in the dominant theories of the rate of interest. The study therefore has implications for monetary policy and asset pricing.
- Description: Doctor of Philosophy
A conceptual model of physical performance in Australian Football
- Authors: Mooney, Mitchell
- Date: 2013
- Type: Text , Thesis , PhD
- Full Text:
- Description: Objective: The objective of this project was to identify the relative influence of valid physical parameters to elite Australian Football performance. Methods: Data was collected on match performance variables (i.e. coaches’ votes, number of ball disposals, champion data rank), match exercise intensity measures (m∙min-1, m∙min-1 above and below 15 km∙h-1 and Load™∙min-1) and physical capacities (yo-yo intermittent recovery test level 2, maximum oxygen uptake, running economy, relative aerobic intensity, maximal aerobic speed and maximal accumulated oxygen deficit) on elite and recreational Australian footballers. These variables were modelled to determine the logical sequence and relative importance towards match performance. Results: The results indicate a sequential physical path to Australian Football performance. The yo-yo intermittent recovery test (level 2) performance influenced match exercise intensity (m∙min-1 >15 km∙h-1& Load™∙min-1) which in turn, affected Australian Football performance (number of ball disposals and coaches’ votes). This sequence was altered by experience, playing position and neuromuscular fatigue. The number of interchange rotations also influenced match exercise intensity throughout the match. Furthermore, the yo-yo intermittent recovery test (level 2) was found to be determined by a complex interaction of physical capacities. However, yo-yo intermittent recovery (level 2) performance was most influenced by maximum oxygen uptake, relative aerobic intensity and maximum aerobic speed. Conclusion: This dissertation showed Australian Football performance is a complex and dynamic system influenced by many variables interacting with each other in a sequential path. Sports scientists and coaches may utilise this information as a framework to evaluate Australian Football performance matches.
- Description: Doctor of Philosophy
- Authors: Mooney, Mitchell
- Date: 2013
- Type: Text , Thesis , PhD
- Full Text:
- Description: Objective: The objective of this project was to identify the relative influence of valid physical parameters to elite Australian Football performance. Methods: Data was collected on match performance variables (i.e. coaches’ votes, number of ball disposals, champion data rank), match exercise intensity measures (m∙min-1, m∙min-1 above and below 15 km∙h-1 and Load™∙min-1) and physical capacities (yo-yo intermittent recovery test level 2, maximum oxygen uptake, running economy, relative aerobic intensity, maximal aerobic speed and maximal accumulated oxygen deficit) on elite and recreational Australian footballers. These variables were modelled to determine the logical sequence and relative importance towards match performance. Results: The results indicate a sequential physical path to Australian Football performance. The yo-yo intermittent recovery test (level 2) performance influenced match exercise intensity (m∙min-1 >15 km∙h-1& Load™∙min-1) which in turn, affected Australian Football performance (number of ball disposals and coaches’ votes). This sequence was altered by experience, playing position and neuromuscular fatigue. The number of interchange rotations also influenced match exercise intensity throughout the match. Furthermore, the yo-yo intermittent recovery test (level 2) was found to be determined by a complex interaction of physical capacities. However, yo-yo intermittent recovery (level 2) performance was most influenced by maximum oxygen uptake, relative aerobic intensity and maximum aerobic speed. Conclusion: This dissertation showed Australian Football performance is a complex and dynamic system influenced by many variables interacting with each other in a sequential path. Sports scientists and coaches may utilise this information as a framework to evaluate Australian Football performance matches.
- Description: Doctor of Philosophy
A conceptual re-alignment of methodology underpinning tax effect accounting : An Australian exploration of the contemporary normalising effect
- Authors: Morton, Elizabeth
- Date: 2016
- Type: Text , Thesis , PhD
- Full Text:
- Description: This research examines the presence and effectiveness of the ‘normalising effect’, traditionally offered as the main justification for tax effect accounting’s (TEA) adoption. TEA can be seen as a technical facet of accounting practice, ‘normalising’ the timing differences between the accounting and taxation systems. That is, income tax is recognised according to when transactions are recognised for accounting purposes in order to ‘normalise’ reported profits, thereby reflecting an income statement focus. It has been contended that this will improve the usefulness of financial reports by ‘correcting’ misleading and ‘unreal’ fluctuations in income tax. Australia’s adoption of AIFRS in 2005 entailed a major conceptual re-alignment of the methodology underpinning TEA, moving away from the income statement focus in favour of a balance sheet focus. This implied a different normalisation emphasis. It is within this contemporary setting, based on a study of 90 companies over the two regulatory periods between 2002 and 2011 (AGAAP and AIFRS), that a quantitative measure of the presence and effectiveness of the normalising effect was undertaken, additionally considering the subsequent balance sheet impact. Effective normalisation was revealed during the AGAAP period, whilst only effective after the removal of loss makers during the AIFRS period. These findings suggest that the relaxation of recognition criteria under AIFRS may have had a meaningful impact on the effectiveness of the new standard. However, when normalisation was given a more narrow definition in light of prima facie tax, deferred taxes had a more substantial impact, particularly during the AIFRS period. Such findings are consistent with the notion thatTEA enables reported tax to be ‘as if’ it were a function of accounting, without a substantial build up on the balance sheet as a consequence. These findings have implications for evaluating the efficacy of TEA and comprehending the nature of contemporary financial statements.
- Description: Doctor of Philosophy
- Authors: Morton, Elizabeth
- Date: 2016
- Type: Text , Thesis , PhD
- Full Text:
- Description: This research examines the presence and effectiveness of the ‘normalising effect’, traditionally offered as the main justification for tax effect accounting’s (TEA) adoption. TEA can be seen as a technical facet of accounting practice, ‘normalising’ the timing differences between the accounting and taxation systems. That is, income tax is recognised according to when transactions are recognised for accounting purposes in order to ‘normalise’ reported profits, thereby reflecting an income statement focus. It has been contended that this will improve the usefulness of financial reports by ‘correcting’ misleading and ‘unreal’ fluctuations in income tax. Australia’s adoption of AIFRS in 2005 entailed a major conceptual re-alignment of the methodology underpinning TEA, moving away from the income statement focus in favour of a balance sheet focus. This implied a different normalisation emphasis. It is within this contemporary setting, based on a study of 90 companies over the two regulatory periods between 2002 and 2011 (AGAAP and AIFRS), that a quantitative measure of the presence and effectiveness of the normalising effect was undertaken, additionally considering the subsequent balance sheet impact. Effective normalisation was revealed during the AGAAP period, whilst only effective after the removal of loss makers during the AIFRS period. These findings suggest that the relaxation of recognition criteria under AIFRS may have had a meaningful impact on the effectiveness of the new standard. However, when normalisation was given a more narrow definition in light of prima facie tax, deferred taxes had a more substantial impact, particularly during the AIFRS period. Such findings are consistent with the notion thatTEA enables reported tax to be ‘as if’ it were a function of accounting, without a substantial build up on the balance sheet as a consequence. These findings have implications for evaluating the efficacy of TEA and comprehending the nature of contemporary financial statements.
- Description: Doctor of Philosophy
A continuous flow elevator to lift ore vertically for deep mine haulage using a cable disc elevator
- Authors: Webb, Colin
- Date: 2020
- Type: Text , Thesis , PhD
- Full Text:
- Description: Vertical continuous ore haulage with elevators in mining for deep haulage is virtually non-existent. In this, research investigations concentrated on a cable disc elevator. The problem of using a cable disc elevator is the friction between the elevator fixed tube and the moving ore on the disc. This research establishes the friction forces existing as the elevator cable and discs are elevated up a stationary tube. Then the focus is to find a way to eliminate that friction. The method involved developing three test rigs: Test Rig 1 measures static friction with the ore placed on a disc in a tube mounted on load cells to measure the resistance with the ore on the disc lifted by a counterweight. This is relevant for an elevator that has stopped under load. Test Rig 2 measures the dynamic friction in an operational 5-inch elevator with the tube on the lifting side held stationary by load cells when the cable discs are lifting the ore. Test Rig 3 eliminates friction in the lifting tube by using a pipe conveyor that travels vertically at the same speed as the cable disc elevator to contain the ore on the cable disc elevator. The cable disc elevator does all the ore lifting. The research generated results for static and dynamic friction for gravel, granite and coal. Cable tension required for ore lift of 1000 metres and the maximum hoisting distance for some existing cables are calculated. Implications of this research are that the cable disc elevator has the potential to haul from depths greater than existing elevators, has a small footprint in a mine, and with some further development could eliminate the need for truck haulage in open cut and underground mining from the mine.
- Description: Doctor of Philosophy
- Authors: Webb, Colin
- Date: 2020
- Type: Text , Thesis , PhD
- Full Text:
- Description: Vertical continuous ore haulage with elevators in mining for deep haulage is virtually non-existent. In this, research investigations concentrated on a cable disc elevator. The problem of using a cable disc elevator is the friction between the elevator fixed tube and the moving ore on the disc. This research establishes the friction forces existing as the elevator cable and discs are elevated up a stationary tube. Then the focus is to find a way to eliminate that friction. The method involved developing three test rigs: Test Rig 1 measures static friction with the ore placed on a disc in a tube mounted on load cells to measure the resistance with the ore on the disc lifted by a counterweight. This is relevant for an elevator that has stopped under load. Test Rig 2 measures the dynamic friction in an operational 5-inch elevator with the tube on the lifting side held stationary by load cells when the cable discs are lifting the ore. Test Rig 3 eliminates friction in the lifting tube by using a pipe conveyor that travels vertically at the same speed as the cable disc elevator to contain the ore on the cable disc elevator. The cable disc elevator does all the ore lifting. The research generated results for static and dynamic friction for gravel, granite and coal. Cable tension required for ore lift of 1000 metres and the maximum hoisting distance for some existing cables are calculated. Implications of this research are that the cable disc elevator has the potential to haul from depths greater than existing elevators, has a small footprint in a mine, and with some further development could eliminate the need for truck haulage in open cut and underground mining from the mine.
- Description: Doctor of Philosophy
A cost analysis of accidents and injuries in the open cut coalmining industry
- Authors: Esson, Ken
- Date: 1992
- Type: Text , Thesis , Masters
- Full Text: false
- Description: Following a study of back injuries in the Queensland Coal Industry, there arose several questions that needed further research. One of these was the cost of accident and injuries, and the impact of this cost would have on an organisation. The project's research involved a comprehensive study of literature pertaining to the cost of accidents and injuries. This included both insured and uninsured costs. The following four classifications of accidents were researched; first aid treatments; first aid doctor treatments; lost time injury cases; and equipment accident damage cases. A coal mine was selected for the pilot study and, data was collected on the four classifications over a complete year. This means a year that has no out standing accident cases or liablilities. The research was then considered to determine its support for the acceptance or rejection of the hypothesis whic postulates that the current methods used to analyse the cost of accidents or injuries in the coal mining industry are inadequate. As a result of the above condsiderations, a number of key points are put forward in support of the acceptance of the hypothesis. The research established costs both insured and uninsured for the four classifications under review. Then a calculation of a weighted ratio of uninsured costs was made. The paper concludes by making certain recommendations and supporting the need for further research into accident costing within the coal mining fraternity.
- Description: Masters in Applied Science in Occupational Health and Safety
- Authors: Esson, Ken
- Date: 1992
- Type: Text , Thesis , Masters
- Full Text: false
- Description: Following a study of back injuries in the Queensland Coal Industry, there arose several questions that needed further research. One of these was the cost of accident and injuries, and the impact of this cost would have on an organisation. The project's research involved a comprehensive study of literature pertaining to the cost of accidents and injuries. This included both insured and uninsured costs. The following four classifications of accidents were researched; first aid treatments; first aid doctor treatments; lost time injury cases; and equipment accident damage cases. A coal mine was selected for the pilot study and, data was collected on the four classifications over a complete year. This means a year that has no out standing accident cases or liablilities. The research was then considered to determine its support for the acceptance or rejection of the hypothesis whic postulates that the current methods used to analyse the cost of accidents or injuries in the coal mining industry are inadequate. As a result of the above condsiderations, a number of key points are put forward in support of the acceptance of the hypothesis. The research established costs both insured and uninsured for the four classifications under review. Then a calculation of a weighted ratio of uninsured costs was made. The paper concludes by making certain recommendations and supporting the need for further research into accident costing within the coal mining fraternity.
- Description: Masters in Applied Science in Occupational Health and Safety
A critical ethnographic study of older people participating in their health care in acute hospital environments
- Authors: Penney, Wendy
- Date: 2005
- Type: Text , Thesis , PhD
- Full Text:
- Description: "While consumer participation is the focus of 21st century health policy, little is known about this concept from the perspectives of people who require acute hospital services. [...]This project set out to explore older people's perspective of participating in their care. Adopting critical ethnographic method, field work included observation of the inpatient experience. Following discharge home people were interviewed about their experiences including what helped and what hindered participation in their care. Similarly nurses involved in [...] a hospital experience were invited to be involved in individual and focus group discussions aimed at defining how they believed they facilitated people to participate as well as barriers that prevent this style of care."
- Description: Doctor of Philosophy
- Authors: Penney, Wendy
- Date: 2005
- Type: Text , Thesis , PhD
- Full Text:
- Description: "While consumer participation is the focus of 21st century health policy, little is known about this concept from the perspectives of people who require acute hospital services. [...]This project set out to explore older people's perspective of participating in their care. Adopting critical ethnographic method, field work included observation of the inpatient experience. Following discharge home people were interviewed about their experiences including what helped and what hindered participation in their care. Similarly nurses involved in [...] a hospital experience were invited to be involved in individual and focus group discussions aimed at defining how they believed they facilitated people to participate as well as barriers that prevent this style of care."
- Description: Doctor of Philosophy
A critical study of the production of nampla (Thai fish sauce)
- Authors: Laixuthai, Parichart
- Date: 1997
- Type: Text , Thesis , Masters
- Full Text:
- Description: Masters of Applied Science
- Authors: Laixuthai, Parichart
- Date: 1997
- Type: Text , Thesis , Masters
- Full Text:
- Description: Masters of Applied Science
A differential scanning calorimetry study of some metal 2,4 pentanedionates
- Authors: Murray, John
- Date: 1987
- Type: Text , Thesis , Masters
- Full Text: false
- Description: The sublimation enthalpy of beryllium (II), aluminium (III), chromium (III), iron (III), cobalt (III), nickel (II), copper (II), oxovanadium (IV) and zirconium (IV) 2,4 -pentanedionate complexes has been determined by vacuum Differential Scanning Calorimetry (DSC), subsequent to benzoic acid being proposed as calibrant for this technique. In conjunction with existing thermochemical data for these complexes, metal-ligand homolytic bond dissociation energies are calculated and are rationalized in terms of the ionic size of the coordinated meta and the crystal field stabilization energies for the complex. Old and new methods for the determination of sublimation enthalpy are reviewed and the present data collectively reveal the versatility and precision of DSC fort the direct determination of sublimation enthalpies of metal complexes. The new sublimation enthalpy data presented for metal 2-4- pentanedionate complexes effectively ends the controversy associated with the previously reported corresponding data/
- Description: Master of Applied Science
- Authors: Murray, John
- Date: 1987
- Type: Text , Thesis , Masters
- Full Text: false
- Description: The sublimation enthalpy of beryllium (II), aluminium (III), chromium (III), iron (III), cobalt (III), nickel (II), copper (II), oxovanadium (IV) and zirconium (IV) 2,4 -pentanedionate complexes has been determined by vacuum Differential Scanning Calorimetry (DSC), subsequent to benzoic acid being proposed as calibrant for this technique. In conjunction with existing thermochemical data for these complexes, metal-ligand homolytic bond dissociation energies are calculated and are rationalized in terms of the ionic size of the coordinated meta and the crystal field stabilization energies for the complex. Old and new methods for the determination of sublimation enthalpy are reviewed and the present data collectively reveal the versatility and precision of DSC fort the direct determination of sublimation enthalpies of metal complexes. The new sublimation enthalpy data presented for metal 2-4- pentanedionate complexes effectively ends the controversy associated with the previously reported corresponding data/
- Description: Master of Applied Science
A financial stress index to model and forecast financial stress in Australia
- Authors: Mukulu, Sandra
- Date: 2017
- Type: Text , Thesis , PhD
- Full Text:
- Description: The series of financial crises that cascaded through and rocked much of the world over the past decade created opportunities to draw meaning from the pattern of countries succumbing to crisis and those who appear to be wholly or partially immune. This thesis examines the case of Australia, a developed country that has seldom experienced an endogenous crisis in the last few decades, but has experienced crisis by contagion. This study designs a financial stress index to measure and forecast the health of the Australian economy and proposes a custom-made stress index to: Gauge the potential for a crisis; and Signal when a timely intervention may minimise fear and contagion losses in the Australian financial market. Financial and economic data is used to design indicators for stress in the banking sector and equity, currency and bond markets. Further, this study explores how movements in equity markets of key trading partners of Australia can be used to predict movements in the Australian equity market. The variance-equal weights (VEW) and principal components approach (PCA) are used to subsume 22 stress indicators into a composite stress index. The VEW and PCA stress indexes were examined to determine monitoring and their forecasting capabilities. It was found that the VEW stress index performed better than the PCA stress index, because it provided more consistent estimates for the level of Australian financial stress. Although, both models show some promise, each model fell short of giving adequate forecasts in financial stress especially at the peak time of the 2007-2009 GFC. Thus, more research is needed to understand the complex nature of financial crisis, how crises develop and the techniques that can be used to predict the onset of financial crises.
- Description: Doctor of Philosophy
- Authors: Mukulu, Sandra
- Date: 2017
- Type: Text , Thesis , PhD
- Full Text:
- Description: The series of financial crises that cascaded through and rocked much of the world over the past decade created opportunities to draw meaning from the pattern of countries succumbing to crisis and those who appear to be wholly or partially immune. This thesis examines the case of Australia, a developed country that has seldom experienced an endogenous crisis in the last few decades, but has experienced crisis by contagion. This study designs a financial stress index to measure and forecast the health of the Australian economy and proposes a custom-made stress index to: Gauge the potential for a crisis; and Signal when a timely intervention may minimise fear and contagion losses in the Australian financial market. Financial and economic data is used to design indicators for stress in the banking sector and equity, currency and bond markets. Further, this study explores how movements in equity markets of key trading partners of Australia can be used to predict movements in the Australian equity market. The variance-equal weights (VEW) and principal components approach (PCA) are used to subsume 22 stress indicators into a composite stress index. The VEW and PCA stress indexes were examined to determine monitoring and their forecasting capabilities. It was found that the VEW stress index performed better than the PCA stress index, because it provided more consistent estimates for the level of Australian financial stress. Although, both models show some promise, each model fell short of giving adequate forecasts in financial stress especially at the peak time of the 2007-2009 GFC. Thus, more research is needed to understand the complex nature of financial crisis, how crises develop and the techniques that can be used to predict the onset of financial crises.
- Description: Doctor of Philosophy
A framework for adoption decision process for blockchain technology - an institutional and actor-network theory perspective
- Authors: Kaushik, Shipra
- Date: 2023
- Type: Text , Thesis , PhD
- Full Text:
- Description: Blockchain has been the most promising technology of the recent times. Originated from bitcoin, a blockchain technology use case has now been explored across almost every industry. It provides several novel technological features like transparency, disintermediation, immutability, trust among stakeholders and decentralisation. Despite so many advantages, the overview of challenges around blockchain adoption has revealed that there is a scarcity of understanding about the process of blockchain adoption decisions. Several organisations have failed to take advantage of blockchain's potential due to uneven adoption across industries and regions. Whether to use blockchain in their business is a difficult decision for many organisations. To fill this gap, this study examined the adoption decision process of blockchain in organisations. Firstly, there is a need of framework that details the steps in the blockchain adoption decision process, including tasks involved and the rationales for the actions taken. This understanding will help the potential adopters to make a successful decision to adopt blockchain technology for their organisation. Secondly, very few studies have examined the factors that influence the stakeholders’ interactions and dynamics while making technology adoption decisions, especially in blockchain based applications. When systems are designed to protect privacy or obscure actors intentionally, such as blockchain platforms, it can be challenging to identify them and understand their roles. Blockchain being an inter-organisational technology, primarily depends on the involvement of internal and external stakeholders. Thus, this study explored the actors involved in the adoption decision process and their roles while aligning other actors towards blockchain adoption. Thirdly, as these actors act as stakeholders while making decision, they act as rational individuals. Therefore, this study also explored their rationales while they are involved in technology adoption decisions to have an effective outcome of the decision-making process. To achieve these objectives, this study utilises Innovation Translation approach derived from Actor-Network Theory and Institutional Theory for technology adoption. The study has utilised a three- round qualitative Delphi method through semi structured interviews to gather views from a panel of experts from organisations who have experienced the blockchain adoption decision process for their business. The targeted experts for this study were categorized as Adopters, Non-Adopters (dropped the idea) and Consultants using selective purposive sampling. The first two rounds were exploratory in nature, and to extend the validity of the responses gathered, the final round was a confirmatory round of interviews. For this study, the saturation was seen with ten experts in the panel for round 2 and round 3. For the pilot study eight participants agreed to be part of the panel. The interviews were recorded, transcribed and analysed using thematic analysis in the NVivo tool. The analysis confirmed the use of Innovation Translation approach in literature for understanding the actors and their roles, by giving a rich interpretation of the results in understanding the crucial interactions among the actors and drawing useful findings. The interpretation also provided an insight into the institutionalisation of blockchain by exploring the institutional pressures. The study has confirmed the existence of many pressures that existed for other technologies, remain for blockchain adoption too like hype, curiosity, competitiveness, business value, cost and time but has explored new institutional pressures with blockchain adoption decision process like understanding among consultants and adopting organisations, and process participations needs. Utilising Institutional Theory for blockchain technology has also revealed a fourth pressure that is exerted by the technology itself like maturity, consensus, network dominancy and technological features that are primarily seen as blockchain being an inter-organisational and a new technology that has not been accepted widely in organisations. Achieving the objectives of this study, the study has proposed a consolidated framework for the blockchain adoption decision process from an exploratory view. The first of its kind in literature, that elaborates on the stages involved in blockchain adoption decision process, identify the actors and explains their role at each stage and how those roles evolve and also provides an insight into the institutionalisation of blockchain by exploring the pressures. These gaps, objectives, method, analysis, and contributions are further discussed in this thesis comprehensively.
- Description: Doctor of Philosophy
- Authors: Kaushik, Shipra
- Date: 2023
- Type: Text , Thesis , PhD
- Full Text:
- Description: Blockchain has been the most promising technology of the recent times. Originated from bitcoin, a blockchain technology use case has now been explored across almost every industry. It provides several novel technological features like transparency, disintermediation, immutability, trust among stakeholders and decentralisation. Despite so many advantages, the overview of challenges around blockchain adoption has revealed that there is a scarcity of understanding about the process of blockchain adoption decisions. Several organisations have failed to take advantage of blockchain's potential due to uneven adoption across industries and regions. Whether to use blockchain in their business is a difficult decision for many organisations. To fill this gap, this study examined the adoption decision process of blockchain in organisations. Firstly, there is a need of framework that details the steps in the blockchain adoption decision process, including tasks involved and the rationales for the actions taken. This understanding will help the potential adopters to make a successful decision to adopt blockchain technology for their organisation. Secondly, very few studies have examined the factors that influence the stakeholders’ interactions and dynamics while making technology adoption decisions, especially in blockchain based applications. When systems are designed to protect privacy or obscure actors intentionally, such as blockchain platforms, it can be challenging to identify them and understand their roles. Blockchain being an inter-organisational technology, primarily depends on the involvement of internal and external stakeholders. Thus, this study explored the actors involved in the adoption decision process and their roles while aligning other actors towards blockchain adoption. Thirdly, as these actors act as stakeholders while making decision, they act as rational individuals. Therefore, this study also explored their rationales while they are involved in technology adoption decisions to have an effective outcome of the decision-making process. To achieve these objectives, this study utilises Innovation Translation approach derived from Actor-Network Theory and Institutional Theory for technology adoption. The study has utilised a three- round qualitative Delphi method through semi structured interviews to gather views from a panel of experts from organisations who have experienced the blockchain adoption decision process for their business. The targeted experts for this study were categorized as Adopters, Non-Adopters (dropped the idea) and Consultants using selective purposive sampling. The first two rounds were exploratory in nature, and to extend the validity of the responses gathered, the final round was a confirmatory round of interviews. For this study, the saturation was seen with ten experts in the panel for round 2 and round 3. For the pilot study eight participants agreed to be part of the panel. The interviews were recorded, transcribed and analysed using thematic analysis in the NVivo tool. The analysis confirmed the use of Innovation Translation approach in literature for understanding the actors and their roles, by giving a rich interpretation of the results in understanding the crucial interactions among the actors and drawing useful findings. The interpretation also provided an insight into the institutionalisation of blockchain by exploring the institutional pressures. The study has confirmed the existence of many pressures that existed for other technologies, remain for blockchain adoption too like hype, curiosity, competitiveness, business value, cost and time but has explored new institutional pressures with blockchain adoption decision process like understanding among consultants and adopting organisations, and process participations needs. Utilising Institutional Theory for blockchain technology has also revealed a fourth pressure that is exerted by the technology itself like maturity, consensus, network dominancy and technological features that are primarily seen as blockchain being an inter-organisational and a new technology that has not been accepted widely in organisations. Achieving the objectives of this study, the study has proposed a consolidated framework for the blockchain adoption decision process from an exploratory view. The first of its kind in literature, that elaborates on the stages involved in blockchain adoption decision process, identify the actors and explains their role at each stage and how those roles evolve and also provides an insight into the institutionalisation of blockchain by exploring the pressures. These gaps, objectives, method, analysis, and contributions are further discussed in this thesis comprehensively.
- Description: Doctor of Philosophy
A framework for sustainability performance assessment for manufacturing processes
- Authors: Singh, Karmjit
- Date: 2019
- Type: Text , Thesis , PhD
- Full Text:
- Description: Sustainable manufacturing methods make it possible to develop products in ways which minimize negative environmental impacts, conserve energy and save natural resources whilst being economically sound. The concepts of sustainability in manufacturing being are still fairly broad, in scope, and need to be more focused and firmly established at the process, machine or factory levels. This project proposes a structure for manufacturing with a main objective to develop a sustainability framework which encompasses various production processes. Structured information models for the seamless flow of information across the design and manufacturing domains, for selected manufacturing processes, are defined. The thesis work identifies key performance indicators (KPIs) for the assessment of manufacturing sustainability and performs analysis of selected unit manufacturing processes and their sub-processes with the aim of proposing a methodology for determining science-based measurements of the manufacturing processes affecting these KPIs. The theoretical foundations established are then used to develop a model that could evaluate sustainability of selected manufacturing processes and their respective process plans providing a basis for inter-process comparison and selection of the most sustainable process plan. The proposed framework is presented in form of a manufacturing planning computer-based package which is designed to to consider different influencing factors such as product information, part geometry, material related physical and processing properties and the manufacturing equipment operating data. The thesis presents a number of case studies which have been published in international journals. The case studies present estimates of the manufacturing sustainability KPIs for a number of production methods. These estimates have been verified with available shop floor data. The work in the thesis makes it possible to establish manufacturing industry equipped to deal the challenges of the future when sustainability will be the major factor up on which the quality of success will be determined.
- Description: Doctor of Philosophy
- Authors: Singh, Karmjit
- Date: 2019
- Type: Text , Thesis , PhD
- Full Text:
- Description: Sustainable manufacturing methods make it possible to develop products in ways which minimize negative environmental impacts, conserve energy and save natural resources whilst being economically sound. The concepts of sustainability in manufacturing being are still fairly broad, in scope, and need to be more focused and firmly established at the process, machine or factory levels. This project proposes a structure for manufacturing with a main objective to develop a sustainability framework which encompasses various production processes. Structured information models for the seamless flow of information across the design and manufacturing domains, for selected manufacturing processes, are defined. The thesis work identifies key performance indicators (KPIs) for the assessment of manufacturing sustainability and performs analysis of selected unit manufacturing processes and their sub-processes with the aim of proposing a methodology for determining science-based measurements of the manufacturing processes affecting these KPIs. The theoretical foundations established are then used to develop a model that could evaluate sustainability of selected manufacturing processes and their respective process plans providing a basis for inter-process comparison and selection of the most sustainable process plan. The proposed framework is presented in form of a manufacturing planning computer-based package which is designed to to consider different influencing factors such as product information, part geometry, material related physical and processing properties and the manufacturing equipment operating data. The thesis presents a number of case studies which have been published in international journals. The case studies present estimates of the manufacturing sustainability KPIs for a number of production methods. These estimates have been verified with available shop floor data. The work in the thesis makes it possible to establish manufacturing industry equipped to deal the challenges of the future when sustainability will be the major factor up on which the quality of success will be determined.
- Description: Doctor of Philosophy
A fuzzy derivative and dynamical systems
- Authors: Mammadov, Musa
- Date: 2002
- Type: Text , Thesis , PhD
- Full Text:
- Description: "The purpose of this thesis is to develop and study new techniques for the mathematical modeling of dynamical systems and to apply these techniques to data classification problems. This approach is based on the notion of a fuzzy derivative. The main aim of the thesis is to examine this notion in data classification."
- Description: Doctor of Philosophy
- Authors: Mammadov, Musa
- Date: 2002
- Type: Text , Thesis , PhD
- Full Text:
- Description: "The purpose of this thesis is to develop and study new techniques for the mathematical modeling of dynamical systems and to apply these techniques to data classification problems. This approach is based on the notion of a fuzzy derivative. The main aim of the thesis is to examine this notion in data classification."
- Description: Doctor of Philosophy
A good sheep run. Letters from New South Wales in Scottish newspapers between 1820 and 1850 with potential to influence decisions on emigration
- Authors: Hannaford, Graham
- Date: 2020
- Type: Text , Thesis , PhD
- Full Text:
- Description: The primary aim of this thesis is to contribute to ongoing historical research into migration to and settlement in Australia by Scots. It achieves this by identifying and examining letters sent from the colonies in New South Wales which were printed in historic Scottish newspapers between 1820 and 1850. In examining the material, this thesis argues that the letters had potential to influence emigration decisions by Scots. The study shows some of the ways in which New South Wales was reported in the Scottish press and compares those reports with conditions in Scotland at the time. The comparisons and analyses of the letters, with consideration of their authors and likely readers as well as the newspapers in which they were printed demonstrate that the letters did have potential to influence emigration decisions. Its particular contribution to knowledge arises from demonstrating how mostly private letters which became publicly available through publication in newspapers had potential to influence emigrants’ decisions about moving to Australia. Rather than claiming direct evidence of the publication of particular letters as having influenced emigration, it shows how reporting of conditions in Australia when set into a context of contemporary events and conditions in Scotland had potential to influence decisions. It is grounded in the body of historical research about colonial Australia and sits within this Australian historiographical context. Given the motivations and attractions of Scots to colonial Australia this thesis also engages with techniques and theoretical approaches associated with Scottish diaspora studies, an area of research that often emphasises other Scottish migration patterns to Canada, New Zealand and the USA. When considered together both of these historiographical approaches lend themselves to primary source material analysis and a methodological approach that this doctoral study uses to examine the motivations of Scots who migrated to colonial Australia.
- Description: Doctor of Philosophy
- Authors: Hannaford, Graham
- Date: 2020
- Type: Text , Thesis , PhD
- Full Text:
- Description: The primary aim of this thesis is to contribute to ongoing historical research into migration to and settlement in Australia by Scots. It achieves this by identifying and examining letters sent from the colonies in New South Wales which were printed in historic Scottish newspapers between 1820 and 1850. In examining the material, this thesis argues that the letters had potential to influence emigration decisions by Scots. The study shows some of the ways in which New South Wales was reported in the Scottish press and compares those reports with conditions in Scotland at the time. The comparisons and analyses of the letters, with consideration of their authors and likely readers as well as the newspapers in which they were printed demonstrate that the letters did have potential to influence emigration decisions. Its particular contribution to knowledge arises from demonstrating how mostly private letters which became publicly available through publication in newspapers had potential to influence emigrants’ decisions about moving to Australia. Rather than claiming direct evidence of the publication of particular letters as having influenced emigration, it shows how reporting of conditions in Australia when set into a context of contemporary events and conditions in Scotland had potential to influence decisions. It is grounded in the body of historical research about colonial Australia and sits within this Australian historiographical context. Given the motivations and attractions of Scots to colonial Australia this thesis also engages with techniques and theoretical approaches associated with Scottish diaspora studies, an area of research that often emphasises other Scottish migration patterns to Canada, New Zealand and the USA. When considered together both of these historiographical approaches lend themselves to primary source material analysis and a methodological approach that this doctoral study uses to examine the motivations of Scots who migrated to colonial Australia.
- Description: Doctor of Philosophy
A great leap forward : EFL curriculum, globalization and reconstructionism - a case study in North East China
- Authors: Zhang, Xiaohong
- Date: 2009
- Type: Text , Thesis , PhD
- Full Text:
- Description: I have used the name, The Great Leap Forward in relation to my study of English as a Foreign Language (EFL) curriculum reform as I have linked economic, political and social developments of the late 20th and early 21st centuries in China with education developments that have occurred at the same time as the reform has been implemented.
- Description: Doctor of Philosophy
- Authors: Zhang, Xiaohong
- Date: 2009
- Type: Text , Thesis , PhD
- Full Text:
- Description: I have used the name, The Great Leap Forward in relation to my study of English as a Foreign Language (EFL) curriculum reform as I have linked economic, political and social developments of the late 20th and early 21st centuries in China with education developments that have occurred at the same time as the reform has been implemented.
- Description: Doctor of Philosophy
A hand made wood object : Studio investigation into transformed nature
- Authors: Rein, Jeannette
- Date: 2016
- Type: Text , Thesis , Masters
- Full Text:
- Description: This research explores the importance of retaining traditional hand skills in terms of their relevance to contemporary and future art practice. I examine the hand made and the process of transforming timber into a wooden sculptural form. I investigate how the artist thinks with the material, and how this process gives the artist the ‘sight’ to identify new and original possibilities. Furthermore, I explore how the transformative approach perpetuates new knowledge, and how skills are modified and adapted to suit the changes. I describe this as a dialogic process. The research examines the correlation between the transformative process and the hand made object, the imprint of the maker and how their memories of the processes used, remain embedded in the object. In addition, this research investigates the transformation processes used in creating an object, to provide individualisation within our highly mechanised world, while providing a bridge connecting the past and the future. Through the examination of traditional hand skills, I demonstrate how such skills provide an anchor, a standard of quality and artisanship that connects artists from traditional wood practice, through contemporary praxis, to hand made digital art. My research focuses on the transformation process and traditional hand skills, the vital role they play in the creation of digital hand made objects; as digital processes utilize new materials, processes and machinery that interfaces with traditional analogue tools.
- Description: Masters by Research
- Authors: Rein, Jeannette
- Date: 2016
- Type: Text , Thesis , Masters
- Full Text:
- Description: This research explores the importance of retaining traditional hand skills in terms of their relevance to contemporary and future art practice. I examine the hand made and the process of transforming timber into a wooden sculptural form. I investigate how the artist thinks with the material, and how this process gives the artist the ‘sight’ to identify new and original possibilities. Furthermore, I explore how the transformative approach perpetuates new knowledge, and how skills are modified and adapted to suit the changes. I describe this as a dialogic process. The research examines the correlation between the transformative process and the hand made object, the imprint of the maker and how their memories of the processes used, remain embedded in the object. In addition, this research investigates the transformation processes used in creating an object, to provide individualisation within our highly mechanised world, while providing a bridge connecting the past and the future. Through the examination of traditional hand skills, I demonstrate how such skills provide an anchor, a standard of quality and artisanship that connects artists from traditional wood practice, through contemporary praxis, to hand made digital art. My research focuses on the transformation process and traditional hand skills, the vital role they play in the creation of digital hand made objects; as digital processes utilize new materials, processes and machinery that interfaces with traditional analogue tools.
- Description: Masters by Research
A kinship of creatures : Exploring the mutuality of lived experience
- Authors: Ní Shíocháin, Máirín
- Date: 2017
- Type: Text , Thesis , PhD
- Full Text: false
- Description: This practice-led research explores questions of interspecies empathy, mutuality and kinship within the context of visual art. The study is situated broadly within the cross-disciplinary field of Animal Studies and espouses an animal advocacy stance within contemporary arts practice. It addresses concerns about the role of animals in contemporary art and proposes that creating art should not subordinate the ethical treatment of animals. The parameters of this investigation are defined by empathy theory, or Einfühlung. This was deemed an appropriate foundation to underpin the research given its historical association with aesthetic perceptions of works of art as well as empathic responses to other living entities including non-humans. Einfühlung and other contributing conceptual frameworks, including compassionate conservation and animal individuality are thoroughly evaluated in a review of relevant literature. Current arts practice in which the ‘animal’ plays a role is critically examined. The consequences for animals in contemporary art are more often malign than benign and this contrasts with progressive thinking about animal sentience in other areas of philosophical research. In a distillation of the above theoretical concepts, the research further references issues relating to selective application of care for non-human animals, in which the level of consideration is often dependent on human perceptions of the creatures’ status, for example native or introduced animals. The results of the research were revealed through a body of practical work including sculpture, collage, prints and artists’ books which depict a variety of animals and birds, both native and non-native, encountered as part of everyday experience; a visual exploration in which human-perspective classification of animals does not play a part.
- Description: Doctor of Philosophy